SE message HP photosmart C4795 printer cannot scan

Message on the States of the computer, I need to close other program printer is used, but how can I find that?  The HP printer gives me 4 codes (0,12,80040021), (2 940 006) and (3.9,0).

Hope you can help me. Thank you

Alexia

Hi AlexiaAustin


Method 1:

You can use the fix that he provided in the article and the Coachman.
Also see the help link below-
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

 

Method 2:

You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

http://support.Microsoft.com/kb/929135

If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

b. on the general tab, click the Normal startup option and then click OK.

c. When you are prompted to restart the computer, click on restart.

I hope this helps.

Tags: Windows

Similar Questions

  • Photosmart B109 n - z: the photosmart b109 n - z - can print, cannot scan

    Help! In a fit of madness, seems to have deleted some of my Photosmart software and despite trying to download it again, its does not work. I can print, but I can't scan. The program that was on my desktop (or the shortcut thereto) did not work. He says that the installation was not complete. He had worked normally for years. I deleted it! When I downloaded the driver etc once again it said it couldn't find the file she needed (?). I don't really know what I'm doing.

    Hi Chris,

    I hope you had a great weekend.

    I would say that running the HP print and Scan Doctor.

    Keep me posted!

  • Photosmart C4795 printer all-in-one

    I can print, copy and scan but when I click on the center of the solution, I get a message from the solution Center cannot run because device installation is not complete. I reinstalled the printer using the CD but still have the same problem

    Thanks, I'll try it

  • New Pavilion g - Word documents want to print to the HP Photosmart C4795 printer, with or without wire

    LV860UA #ABA Prod

    Windows 7 64 - bit

    No errow message adds the new computer and HP Photosmart C4795 wireless printing. Microsoft Word documents that print, but Excel and Power Point will print. Help

    It's strange. I recommend that you uninstall the software completely. Reinstall the complete and updated software in place the wireless again.

    Best regards
    ERICO

  • Photosmart C4795 prints not (most of the time)

    I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. Installation (with the Vista computer) went well, and all tests and some documents on the XP one and myself. After a few months, he started to give me a "document not found question '. I discovered that I needed to push hard enough to get the book far enough, but not too far. Now (on the XP computer) it says its printing, extracted in the document, then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is a HP Mini 1000, and HP update doesn't change anything.

    I got to work by sending the document again, and then cancel the print job wrong on my computer, and after that it was cancelled on the computer to cancel on the printer. At the point where the paper ejected I placed it on the tray at a time an inch away where I was told in the animations. Then he started on the second print job and worked (he stopped because I only had one page, but took over when I placed the book in the same place and pushed OK.) If the problem was in fact where I place the paper I want animations would show good positioning.

    Yet once again, if anyone needs help or clarification on how I did the job please answer.

  • Photosmart HP 6520: Cannot scan afterWindows 10 update

    Even if I can print everything from upgrading to Windows 10 I can't scan from the printer to my laptop. A message appears on the printer stating "Connection error" the computer does not respond. "Check the cable USB is attached. Obviously is that I can print as usual. Can anyone help?

    Hi Doc, thanks for theinfo and your time and effort. After going through all new with Daniel to the HP Support, it seems that the USB port on the printer may be at fault. Who changed things to scan wireless, it wasn't a problem and everything worked. Printing from my laptop to the printer was also no problem. The laptop recognises the printer via the USB cable, but not the reverse. Daniel has once more remotely connected to my system and made all of the aforesaid goods. Looks like I'll have to either scan wirelessley or use the scan on my desktop shortcut. Prohibition to buy another printer, wireless scan shortcut it will take. Thank you once more and also Mark, Laura, Patrick, Gavin, Jake and Daniel at HP

  • Photosmart 3210xi Printer-cannot install the new computer Win7

    Hello

    I just got a new computer which has Windows 7 as operating system, previously using Win XP.  I have the original installation disc, but when I try to install my HP Photosmart 3210xi printer, it tells me that it is incompatible with my operating system.  How do I overcome this?  BTW, I can just plug in the printer and it will work, but of course I want to install it so I can use the scanner program and others.  I am not a novice, but I'm not a computer programmer that so keep that in mind!

    Debbie

    Hello

    Download and run the installer printer HP rom www.hp.com/go/tools

    Kind regards
    Jabzi

    Give Kudos to say 'Thank you' by clicking on the White Star under my name.

    Click on 'accept as Solution' if it has solved your problem, while others may find it.
    I work for HP

  • Photosmart HP 7520: Cannot scan to printer

    I was able to scan up to today.  Try to scan to the computer and not give me the option for the photo or document.  He gave me the option once it has scanned the PC, and I had chose PDF and it only would give me the JPG.  It scanned the Microsoft Scan program and fax, which I had never used it before.  My scans before went into the My Documents folder, which I prefer.  I can scan OK on a flash drive.  When I try the computer now, it says "without a computer.

    I tried HP printer and scanner doctor and nothing worked.

    Welcome to the @Jackman1933forums, I hope you do well!

    I have seen that you are facing some problems of scanning when scanning your Photosmart 7520, your system Windows 10 and I hope to help.

    Lets first make sure you have full functionality drivers and software installed on your computer by running the HP printer install wizard for Windows, which will be to find and install your printer software for you. Just follow the instructions until it is installed.

    When you are finished, you should see the printers on your desktop software. From there, open and try to scan. If you do not see the options you are looking for, or if there is no problem, let me know and I will do my best to help you through it.

    Good luck, I hope to hear from you. If you want to send me a 'thanks' for my attempts to help, click on the thumbnails below.

  • Cannot get HP Scan Pro to see my Photosmart 6180 printer for scanning

    Hello

    I would like to be able to scan documents to PDF files, but HP Scan Pro does not see my scanner. Several times, I get the error message:

    Error:

    Sorry, scanner could not be initialized.
    (Scanner not found.)

    I tried all the steps suggested in your troubleshooting guide, including to repair my disk

    permissions, uninstall and reinstall the HP software via software update, but nothing helped.

    I was able to scan to jpg files via System Preferences/Print & scan/open Scanner and also analysis of the printer to a flash drive, but it would be much more convenient scan documents directly to PDF on Mac format!

    This feature is used to work when I had this printer connected to a PC.  I am now trying to run on a new Mac Mini running OSX 10.7.3 Lion. The printer is connected directly to a USB 2.0 on the Mac.

    I feel of ben with her already and it seems to work fine with this computer for printing.

    Any help you could offer would be appreciated.

    James Pink

    [email protected]

    Hi James,

    The complete functionality (including the HP scanning software) HP software is not compatible with Lion.

    The driver for your operating system available via update of the Apple software and not on the HP site.

    Be sure to remove completely any HP software installed as follows:

    * Please note that the following steps will delete all HP software installed.

    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on the HP uninstaller application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold the keys Ctrl + Alt + Cmd on the keyboard at the same time as you click on Uninstall
    7 approve any prompt to uninstall all HP software.

    The configuration of the device according to the steps below:

    http://support.HP.com/us-en/document/c02911238

    You can find out how to scan with the software by following the FAQ section.

    Kind regards

    Shlomi

  • Photosmart C4795 printer problem - cannot print from my HP laptop

    I tried to run the diagnostic tool. It indicates that the printer is offline. I can't understand how to reconnect. I have windows XP.  I was on the phone with ATT/HP for more than an hour with no resolution. Help, please!

    Reinstall the software and drivers from here.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3940574

  • HP Photosmart 6250: Printer cannot access server

    Hello

    I'm trying to set up my printer HP Photosmart 6520 for the first time.

    The printer is connected to my wireless router.

    My computers and iPads can access and print using the printer.

    BUT when I try to use Web tools

    (1) product update,

    (2) activate ePrint or

    (3) enable Web Services

    I get the error message USELESS "Problem connecting to the server of Web Services"

    I am able to connect to the Internet using a web browser, so I don't have an ISP issue.

    I'll put in place the printer at home behind a NetGear wireless router.

    The implementation for the browser does not use a proxy, so I have no proxy information.

    Is anyone able to help.

    Thank you

    Ron

    Hi Ron,

    Since your d\ownlaod PC and install the latest firmware of printer below, this is essential to maintain a connection with the server web services:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040/swItemId/OJ-112335-4

    Once done restart your printer and try to activate Web Services once more.

    Kind regards

    Shlomi

  • DeviceHP Photosmart C4400 printer cannot find the printed alignment page

    On the replacement of printer cartridges, the printer is unable to locate the printed alignment page.

    Thanks for the links check, I didn't by this process, here are the answers to your other 2 questions.

    My system is Windows 9...

    No, I don't have an error message on my PC, what I got was a message on printow window saying "alignment page not detected."

    Hello

    1. which version of the operating system is installed on the computer?
    2. you receive an error message?

    Method 1:
    You can see the article provided to solve the problem.
    Troubleshoot aligning the print cartridge
    http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=buu00657&LC=en&product=3655557

    Method 2:
    You can make sure that the latest drivers are updated on the Web site of the manufacturer.
    Download drivers and software - specify product name
    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3655558

    Reference links:
    HP Photosmart C4400, C4500, C4600 and C4700 all-in - One Printer Series - alignment of the print cartridges
    http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=3776405&prodTypeId=18972&ObjectID=c01369878
  • HP Photosmart Prem C410a cannot scan document to host (wireless). Error on front panel?

    4.2 utility diagnostic of the Scan ran HP and façade problem identified.  The program could not find any available destinations to which the scans can be sent.  Restart the computer and reinstall HP Photosmart SW does not solve the problem!

    Problem was solved by uninstalling all printer software HP components and disable firewall protection software and reinstall the HP printing software using the installation disc.

  • HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

    Windows 7 64

    HP Officejet 6500 a Plus e-All-in-One - E710n

    Wireless connection

    Until recently, I noticed that it takes a good 45-60 seconds to print. From the moment that I hit print say at the start of the printing printer. Real bummer, but today I tried to scan and got an error "Scanner communication cannot be established... "I've uninstalled all the drivers and the printer and reinstalled same thing any suggestions I have to be able to scan.

    Hey alsmith1964,

    It seems that the network communication between the PC and the printer has become lost or locked up.  The first step, I would suggest in this case is to perform a cycle of power to all devices in the network circuit.

    Follow these steps to reset your printer HP, your router and your computer.

    1. To turn it off, press the power button on the HP printer.
    2. Unplug the power cord at the back of the HP printer.
    3. Unplug the power cord from the wireless router.
    4. Turn off the computer.
    5. Wait 30 seconds.
    6. Reconnect the power cable to the wireless router.
    7. Wait 30 seconds, or until the router is completely ready.
    8. Turn the computer on.
    9. Wait for the computer to recharge.
    10. Reconnect the power cord to the back of the HP printer.
    11. Turn on the printer.

    I would like to know if it is able to get the question to be resolved,

    Jason

  • ALL IN ONE OFFICEJET PRO 8600: HP all in one printer cannot scan after upgrade to WIN7

    SINCE the introduction to LEVEL FOR wIN7... COPIES of the PRINTER, BUT I cannot NOT SWEEPING or POSSIBLY FAX (have not TRIED THE LAST ENCORE).

    PRINTER MONITOR SAID TO CHECK THE CANDLES, ETC., BUT ALSO MENTIONS NOT INSTALLED OCR SOFTWARE NOT?

    I DOWNLOADED WHAT I THOUGHT, IT WAS THE LAST LINK TO ONLINE (SOFTWARE AND DRIVERS). DOWNLOADED, COULD NOT INSTALL. CONTROL PANEL I CAN NOT EVEN UNINSTALL HP PRINTING PROGRAMS TO REINSTALL THE NEW LINK.

    CAN SOMEONE HELP ME?

    Thank you.

    HAVANESE

    Hello Maltesem,

    I'm so happy to hear that we were able to get the problem resolved for you.  It's great! 

    As for the small pop-up that appears when scanning, which is part of the new software and cannot be removed.  I know this can be a bit of a pain if you are not used, but it is convenient if the scan does not look right and you want to cancel it.

    If you have any questions or concerns, please by all means email me back and I'll be happy to help you at any time.

    See you soon,.

Maybe you are looking for