Mark as a modifier (instead of the structure)

Similar Questions

• Marking in story editor mess up the Structure

  I have an XML file that looks like this:

  <? XML version = "1.0" encoding = "utf-8"? >

  < MailItem attribut1 = "Value1" attribut2 = "and so on...» ">

  < Mail_ID > 12345 < / Mail_ID >

  < CustomerName > Mr. Bray < / CustomerName >

  < Sale_Date > 2015 - 02 - 24 < / Sale_Date >

  < AndOtherElementsToo >, which are not important right now < / AndOtherElementsToo >

  < / MailItem >

  It is important to note that this document may have a < MailItem > (se), that in fact a component root. I tried this wrapping in ANOTHER component root called < MailJob > but which caused too many problems. More on this in a minute.

  I have an InDesign template which is very simple. No tables, nothing. I import my XML file into my TAGS Panel and go to the city marking different placeholder text with things like Mail_ID and Sale_Date.  I perform a test IMPORT XML and things look great.  A minor annoyance is if the items are not in the right order in the STRUCTURE pane, they will not be imported correctly, but I can engineer around it ensuring that the elements are manufactured in a static order. So far so good.

  The problem comes when I go to the part of the 'letter' of my model. It begins, 'Dear so-and-so,' (literally).  Since I want ' and if ' to be the real name of my data, I need this tag. I opened this place in the story editor (since I want only the PART of the replaced text) and I select ' and if ' and I select the CustomerName tag in my tag Board.

  What's going to happen, it's when the wheels are loose the wagon and I desperately need help. As soon as I have the label, three things happen:

  1. The tag appears in the story editor. Very pretty. No problem here
  2. A new tag appear in my TAG pane called "history".
  3. My shutter Structure creates a new element called history and built a new element, CustomerName below

  When I perform a test import now, greeting on the letter is not replaced (the data does not matter) because, well, the structure does not match incoming data. It is the search for < MailJob > < history > < CustomerName > Mr. Bray < / CustomerName > < / history > < / MailJob > I don't have in my XML file.

  I learn that defining the predefined Options tag allows me to change the default 'Story' to any pre-existing tag value. Great!  This solves the #2 problem above ('history' tag will be created in my TAGS Panel).  But #3 problem still happens; Now, my structure looks like this:

  • MailItem
    • Mail_ID
    • CustomerName
    • Sale_date
    • MailItem "Dear so-and-so."
      • CustomerName

  ARG!  All ways try to drag and drop the element of CustomerName nested on the rise in the results of the Structure of the text being UNIDENTIFIED in the placeholder and the process starts again when I try to fix it.

  I thought for a moment that maybe tags embedded in need of story editor live within a second level element instead of right under the root element, so I wrapped the entire XML file in < MailJob > < / MailJob > elements. This only make it impossible to have placeholders for text individual normal import/replace correctly (even though I reloaded the tags in the TAGS of the newly wrapped file panel). I did not worth analysis tags to the breast-story-editor, given that it's a deal breaker right from the start.

  I can't just reformat the XML to match what InDesign expected because we have AN xml format (and exporting) for hundreds of document layouts. I * really * don't want to apply the XSLT for every weird change design group wants to do (for example 'we want to suddenly start using the name of the State in the text of the letter, you can update the XSLT file?") and besides, we run jobs GIANT (from thousands of individual documents) and file XML EACH XSLT processing will slow things more I want (I already have a slow process upstream, I deal with I don't want it to be slower)

  I'm going crazy, the pressure is on and I'm desperate for help.  Why can't get existing XML elements to import within a placeholder (with static text or other elements) in the same way that when I tag an entire placeholder? What I am doing wrong?

  No worries. I think I see what you are wanting.

  XML is a sequence of single stream. Once you create several images, ID considers that these frames separate stories. For an example, click in the top frame and the search for the word prove. Unless ID is to be found in the document, ID will not find the Word as it appears only in the second frame. ID applies to XML, which, like importing a Word document, needs to be told where to go when there are several images.

  A few choices.

  Thread management. This will then work without fuss - if it works for your design.

  Change the XML in order to take account not threaded frames. In the screenshot, I did a quick XML and imported. Now, I would not recommend root several elements, but it's quick and dirty.

  

  And the XML that goes with it is:

  
  
  
  TWO STORIES
  
  
  CHANGE THE XML
  TO MATCH STRUCTURE
  
  
  

  Mike

• Safari with question marks instead of the text

  Several Web sites in Safari 9.1 showing many points of question marks instead of the text. I just proposed by Apple and done nothing. I have Imac (late 2009) OS X El Capitan 10.11.4.

  Question marks instead of the text is an indication of a problem with fonts.

  Open the book fonts in your Applications folder.

  In the fonts start menu bar click book fonts > Preferences and then click: resolve duplicates by moving the files to the trash

  Quit and then restart Safari to test.

  If this does not help, back to the font book menu bar click file > restore to the Unicode Standard

  Quit and then restart Safari to test.

• keyboard keys change symbols in red. I would like to change itself can use quotation marks and question marks instead of the capital, etc. who are now working.

  keyboard keys change the symbols in red on each key.
  I want to change back so I can use quotes and mark instead of the capital points, etc. that appears now, when I hit the SHIFT key.

  What type of computer you are using

  in what application are you facing this?
  You can also try to perform a system restore to an earlier time to check if the question

  If it's a laptop computer consult the manufacturer for help

• I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  Hi Eva,

  Could you please for the preferences of Photoshop, then tab Perfomance.

  In here please see, if the option "Use Graphics Processor" must be verified.

  These filters are largely dependent on the graphics card.

  Respect,

  Tanuj

• Instead of using the structure of the event with the producer consumer?

  I used the architecture of producer-consumer in the past to control a state machine with the structures of the event.  I'm working now with the basic version of LV that does not include the structure of the event.  Can anyone recommend alternatives to the use of the same architecture in this case?  Thank you, David

  Before the introduction of the structure of the event, the only option was the election.  Control terminals are in a time loop (the producer) with shift registers and a wait, usually about 100ms.  At each iteration of the loop, the control's current value is compared to the previous value.  If it has changed, and then take appropriate action.  Andrey suggested, queues are a good way to pass information between the loops.

  It works for the equivalent of the value change events.  Things like mouse to top or filter events were much more difficult or not possible.

  Lynn

• using image instead of the image number labels?

  Hi team,

  I'm building a major project that would be modified during its construction, I stress a little because I'm confident on the timeline to move forward and backward through the structure, (as well as the user with the ability to use a menu to go where ever they want).  Then out to form the menu that specifies where to go, there's a front and back button using framework next and previous to move forward and backward.

  ..  So, what happens if after construction of a large part of this, the client wants to put in an extra page? This will upset my navigation (OR if I put the extra page at the end of the timeline menu works fine, but forward and backward buttons may not work properly)

  So should I use image instead of the image number labels?  (How can I do this gotoAndStop (?);)

  Or y at - it another way I should approach this?  like having a variable to keep track of page instead of numbers of chassis number?

  What do you think?

  See you soon

  Void

  There is no need to rename the image labels just because you add a new.  This is one of the main reasons to use labels instead of numbers frae... it saves you from having to change completely due to a.

  (How can I do this gotoAndStop (?);) ... -->. gotoAndStop ("labeltext");

• An interrogation continues with the Structure of the event, please help me understand

  Dear Forum,

  I'm 3 months in LabView. I created a front panel with what I consider a reasonable set of code below with a basic entry control power boulean a case controlled set of actions. I enclose a strongly striped version to the bottom of this structure with sections deleted button so that the executed code is removed to simplify just ask questions on this control structure. After the recent webinar, I understand this form of control to call a continuous structure of vote - and it makes perfect sense and seems natural for me to the point of programming of data flow.

  But according to the webinar it is preferable to use the structure of the event.

  However, the structure of the event seems really weird to me. My main question here is certainly the structure of the event MUST be voting each of the values itself anyway, otherwise how does he know that an event had occurred?

  So what is the difference between explicitly "polling" the buttons myself with a while loop and using a complex (for me) of the event with 'hidden' polling stations under?

  The vote of the 4 buttons in my example should be done at the same time if Labview is truly multithreaded/parallel? There should be no difference in the level of the computer between my code querying and the code 'hidden' the structure of the event making the mark.

  Thank you in advance for you help to clarify my confusion.

  Sincerely,

  Robert Gibbs

  rg8766 wrote:

  Surely the process:

  Check the OS press > OS encodes this trigger to send > OS sends a trigger that the button has been pressed > Labview checks if a trigger happened > Labview decodes what action has been coded in this trigger > Labview takes appropriate, based on relaxation measurements

  has more steps and is more intensive than processor

  LabVIEW checks the key > Labview performs the appropriate action when you press the button?

  BONE is already this process in any case.  If you are in fact doubly effort without worrying.  And the OS is much more efficient that your code will be.  So just let the OS do work heavy while your code sleeps.

  And think about the trigger more as an alarm clock.  You are asleep (do nothing, with no CPU) when your alarm goes off.  You wake up and perform the task that the alarm tells you to do.  Once done, you are waiting for another alarm, so you get to sleep.

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• get the structure of the event inside the while loop to wait for event occurs before the execution

  Hello

  I have a small problem, when I raise an event using a value change button, which works very well.  The problem is that the VI does not wait for me raise an event and instead runs the same event again, even if I have not pressed the button to start again.  The mechanical action of the button switch is released is.

  I was wondering how you get the structure of the event to wait for a user event, after that he executed the first time.

  James.Morris wrote:

  There is no reason that the event should be raised twice as much that the only way that it fires in your code is by the user by clicking on 'Hall measure only'.

  Oh yes, there is, and I deserve a kudo for this one.  Mechanical action on the button is set on the switch until published, so click to generate an event, on the bottom and on the square, attached is an example.

  My boy has my students hate this question, and to be honest, I hated it.  When never would you do that intentionally?  Honestly?  Anyway to change the button back to normal (as default latch when released) and move the terminal button in the structure of the event where it is managed and it will work as usual.

• Using the Structure of the event in a Machine of State Enum

  Hello!

  I'm new to labview(~10 months). I tried my best to search on the forum/net but didn't have an explanation.
  I simplified the code to show the problem. I'm using Labview 2013 worm 13.0f2 (32 bit).

  The "EventStructure_Trigger_in_EnumStateMachine.vi" is a State Enum machine.
  The "resting" State contains a structure of event that detect evnet of changing value of 3 buttons:

  Do something touches: simply show something of the display flag
  Start Run button: bring the program into "run" State
  End key: put the program in the 'final' State and then close it

  The State of 'run' is a time loop that will be stopped only by clicking the 4th button - button stop running and bring back the program in case of 'lazy '.

  The problem is to "run" State, any click on irrelevent buttons 3 (buttons only detected by the structure of the event in case of 'lazy') will make the program crash.
  By comparison, I create an another vi attached as 'WhileLoop_in_EnumStateMachine.vi', which is almost the same except that the event structure is replaced by a while loop (and do something key has no function). In this vi, everything works well - by clicking the irrelevent buttons will not crash.

  I can't understand why.

  P.S. I failed to attach .vi onto this post... a zip compressed instead.

  A problem that resembles yours: http://forums.ni.com/t5/LabVIEW/why-does-simple-case-structure-code-hang/td-p/3176592

  I think that the response of Stuart will help you understand how your code handles this situation.

  You must manage your events outside your main loop to your structure to operate on any captured event.

• problem with VI execution to the use of the structure of the event

  I close with this sub - VI, but it reacts as expected. My logic was 1 tables initialized with sequence, then the structure of the event in many different cases. The goal is to read a 2D .cal file 1 2 tables. Cells can be modified manually by typing in the text box, then clicking on the load button. Slider determines with cell in the index. Certain sequences of events work either

  (1) download the cal file

  (2) move the cursor

  Type 3) x input box

  (4) load x value

  Other sequences of events are the VI does not, i.e.

  (1) type x entry box

  (2) load x value

  Can some kind soul tell me the error of my ways?

  Walt Donovan

  First glance only:

  You need to connect the tables 1 d in any event, other that they clear.

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Value of cluster lost when you leave the structure of the case

  Hi all

  I'm having a problem with a particular VI I'm working. (FYI it's in Labview 8.0)

  The VI is set to run a current source, voltmeter and thermometer, then recording and graph the data in various ways that can be selected by the user.

  Everything seems to work fine except a particular graphic method. When I try to graph current compared to the tension, the current value is lost estates. In a case the current and voltage are combined to form a cluster, and then leave the case structure to be later appended to a table of cluster.

  However, the value of the cluster is lost when the chart is set for the voltage vs. Any other method and it works correctly.

  I can't understand why this is happening as it does not make much sense than other methods of work charts, but this one isn't when it is coded the same exact other than having the different variables.

  I have attached the VI with added indicators showing that the value of cluster is lost once he leaves the box structure. Any help would be appreciated.

  Thank you very much and I apologize for my extremely messy VI.

  -Nathan Cernetic

  You really need to boil this down to something we can run and reproduce the problem.

  Have you tried to break a few relevant connections and rewire? Something is possibly corrupt.

  Besides being a mess, your VI has quite a few glaring errors.

  Let's take a look at the structures at the top right:

  • 90% of the code is the same in all the structures of three cases, so all that needs to be inside the structure is the small part where you built the table 2D. All the rest is outside of the case.
  • The structure of the sequence has no useful function.
  • Why do you need to reverse the table with each iteration of the small loop FOR? Once before the loop would be sufficient. Right?
  • Why you use table built inside the small loop FOR, but no autoindex on the edge of the loop? All you ever get is an array containing exactly one element, no matter how the loop runs. Seems unnecessary! (see below for an alternative image).
  • You wouldn't even need to reverse if you want to use "built the table" instead of "insert into the table at position 0" in the central part.

  

  Other: You constantly hammer all nodes of your property. The only need that will be called when things change. Again, you have far too many cases. For example, in the structure of the case where you are having problems, the same nodes of property exist in all cases. A single instance of the property node belong outside the case and only the string inside each case constants. Whenever the code is the same in all cases a case structure, which code belongs to the outside!

• In place the structure with replacement of table element uses wrong index

  Hello

  I use the place in structure of elements and notice any strange behavior: if I replace elements in a Subvi and then calling VI, the index is off by one calling VI, most of the time. I saw one or two tracks where the index was correct. Searching for the forums have provided other problems with in place it the structure but not exactly it.

  Attached are a couple of screws demonstrating the problem and some screenshots.

  It seems that you have a problem of optimization of LabVIEW.  It seems that the value of the line is get incremented in your Subvi and that it is somehow going to the main VI.  If you always put a copy in your reset_selections.vi call, I was not able to get the error to occur.  There was a couple of bugs similar to this one.

  You can always add another copy in front of the call to reset_pages.vi, but I never had the problem to occur without it.

  

  I have attached the modified so VI.