Markers of subitems?

Similar Questions

• Preparation more long tongs (interview) for a better overview? -Markers? Subitems? Etc. ?

  Hello! I'm new to PP!

  I work with clips more interviews (10-20 min) and I would like to prepare in order to obtain an overview on the passages of each clip that I could use for a sequence later. -At the FCC I could put not only markers in the source! window, but also change /name/ colorize them. So I would appoint several markers after the passages of text in an element in the source window.

  Pp, seems to be only possible in the sequence window which is too late to get a glimpse.
  Any suggestions? Subitems?

  Thank you very much for your help! -Michael

  You can subclip for this, but I'm personally not a big fan of subitems in the first, so I generally do not use them. They act just... weird. I guess they are functional, but usually I find that when I try to use, I am limited and end up having to find workarounds. It is difficult to be more specific than that; I have been accustomed to subclipping in Avid that works much better.

  Despite this commendation, if you want subclip, probably the best way to do is to load your source clip in the Source monitor, score points, and then hold down the Ctrl/Cmd key and drag the Source monitor Panel to a bin. This will display a dialog box allowing you to name the subitem and then slide the subelement in the tray. You can continue this way until you have created all your subelements.

  As markers go, I think you're right: I do not think there is a way to add markers appointed to an element in the Source monitor. I'm not positive on this subject, because I have never tried to do. As far as I know, the only markers that can be named are trademarks of sequence. You can request a feature here: Adobe - feature request/Bug Report Form

  My usual method of treating long interviews is kind of a subclipping hybrid approach. Basically, I create a sequence for each topic of the interview, and then either drop the full length interview clips in this sequence and chunk it upward, by renaming the segments I will or I load in the Source monitor and make the routine of starting and remove those in the sequence. Maybe it is lazy, but I find myself doing the first than the latter. It is easy to see where an interview answer begins and ends (usually) looking at the peaks of waveform in the audio clip. After that I have chunk on all the parts, I listen to just the sting and the name of the movie clip instance in a way that allows me to understand what the content of the bite is quickly. I then a workspace set up with two panels of chronology, where I can drag a piece I want to use in my editing work. I adopted this approach, after I have more or less me skunked by subclipping, and it's worked well for me. Of course, there are a number of ways you can go about this, so just experiment until you find one that works for you.

• Subitems change when exporting

  I did a project for my research laboratory at the school, and that's the only thing completely stop the progress. Basically, I recorded my set sail in minecraft. I have imported this video at first and then started to choose specific bits I want. I'm talking about the clips of a fraction of a second. At this point, the video is good, any delay had fallen behind in the game, and I ignore these segments. To get out the bits I want, I use the 'in' and 'out' markers, (so I'll frame-by-frame to find what I want) and then convert it to a subelement. If I play the subitem, 90% of the time, it's always good at this point, but still sometimes, even at this stage, it will change the images I chose. When the clip is always good, I then export it as a FLV (to use later in Flash). Even before flash, I'll reread the first clip and executives changed completely again. It is not consistent, I can get a few clips at the beginning that work very well, but eventually this will start happening and I'll have to give up angry and try again in a day or two. Yesterday it worked perfectly, so I thought I could get all done today, but it is as bad as ever. I have NO idea what is happening.

  I'm relatively new to the program, so if you need more information, please be specific.

  Hi Jaime,

  Basically, I recorded my game minecraft to navigate...

  Records of the game are generally recorded at a variable rate. Premiere Pro can't ingest or playback these files correctly. Unexpected results occur, including those you met.

  You need to transcode the file before importing it into Premiere Pro. You can try Media Encoder, but if this does not work, many people use Handbrake.

  Sorry you find it now.

  Thank you
  Kevin

• Can not change the color of the markers personalized in the run-up

  Hello

  Although I managed to find a way to create markers personalized in the run-up, I'm not able to change their color once I've created. They seem to be related to the marker that I used to create my custom marker (hope that makes sense). They also do not appear in the parameter preferably marker.

  What I'm doing wrong here?

  

  Hi rOn,

  Thanks for trying workflow of markers. You are exactly right.

  In fact customs markers are not different marker Type. They are only subitems or markers of comment depending on how you created them. In the preferences of markers, the image you also shared, entries for marker Type. Markers personalized is either comments/subelements are not shown individually. If you change the color of any type of marker that is a subelement/comment of preferences, in the same window that you shared, the colors of all connected markers & custom markers would change on criminal timeliine and marker Type.

  Currently, we are unable to select different colors for the same type of marker (to elsewhere too custom markers). I've highlighted this my team. We would look into it.

  However, prelude supports the model tag. I hope you checked.

  In window--> Tag, you can mark the Panel. You can create multiple tags with different colors and use them transparently on the timeline.

  Currently prelude supports tags only for comment markers. In the future, it can also support subitems.

  

  I hope it helps. Please come back in the event of any confusion.

  Thank you

  Mayjain

• Index of the markers of the Viewer?

  In the index of the timeline, you can see the list of markers in the timeline. Is it similar to put in markers Viewer?

  mnstudio wrote:

  In the index of the timeline, you can see the list of markers in the timeline. Is it similar to put in markers Viewer?

  Well, sort of... you can set your browser to display the list and twirl the little open triangles.

  You will see all kinds of things, such as Favorites, keywords, etc..

  There is no way I know of to make sure that you only see the markers.

  

• Flex time markers appearing at random

  I currently mix an orchestral project, using individual records of each instrument. I use Flex Time (polyphonic) and Pitch Flex rather sparingly to align everything. However, sometimes I go to random to hear crackles when playing. I'm going to the incriminated violins and come back to Pitch Flex Flex Time and see a bunch of markers at random, causing the problem! I'm doing something for this to happen, or is a problem any? Help is appreciated!

  When you switch to polyphonic edition, logical adds markers to try to "AutoCorrect" synchronization problems, but them not activated unless you click on them once you change.

  What you hear is the bending of a track itself, poor attempt at correction of pitch and time logic. Unfortunately when using Flex, you will almost always get crackling, glitching or changing random pitch where the terrain changes were not made. It is unfortunately the nature of Flex.

• Flex Time grey markers

  I recorded a guitar track in Logic Pro X and added rhythmic Flex Time with quantification and I didn't like the way it turns out so I wanted to change. I saved the project in order to come back later and now flex markers are grayed, and I can not change/remove the. I know that to have the 'flex' box checked for visible renderings. I can see them in the track, but they are not clickable. I tried to cancel the story, but it won't be enough to create projects. I also tried the transitional Mode Edit to remove the markers from there, but I can still hear the messy time to flex (I unstapled it and them added). I'm out of ideas at this point.

  Download you project so we can take a look

  www.wetansfer.com. file/link send to yourself - and then past the link here.

• Google Maps: pan and zoom controls are not displayed. 'PIN' markers can appear only once, and then disappear.

  Loading Google Maps, either directly, or where they are incorporated into other sites, orders pan and zoom are not displayed. Location markers 'PIN' can appear only once, but disappear after doing anything with the card. I'm on the last Windows XP and latest Firefox. This problem is long-standing and has remained the same during several different versions of Firefox and Windows updates. I tried "CTRL-0' no effect."

  Problem solved by 'Reset Firefox'. Before that, tried "Safe Mode", no difference. Not aware of the limits on the cookies or the memory usage. Controls on the left (Pan, zoom) for Google Maps were good here and in usual and sizing correct positions and could be found with the cursor and activate it, but 'ghosts' that were not display. Same problem if the content was maps or satellite pix. Reset solved the problem.

• move the markers of arrangement in the main window in logic 10.2.1

  It is pain staking whenever you did a two bar Prechorus and you realize that you need to four bars instead, but you can not move without doing the following one disappear and if you drag the last of them, he's just sitting there.  According to me, once I could move them as the manual said that you do there are a few version.  However, now in the logic section help me to locate the page.

  I did it with markers, but goes the same for the markers of the arrangement.

  With the pencil as a secondary tool, cmd click to create a new marker anywhere.

  Option + shift and you can slide the front or rear of the brand to the shorter it or stretch it.

  Click on the marker, press the delete key to remove it.

• Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  A simple...

  Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  Best

  T

  See this support document and go where it says "Add markers using a list of chapter markers":

  Compressor 4: Add markers

  https://support.Apple.com/kb/PH21224

• Chapter not appearing markers do not

  If for any reason any my new 4th Gen Apple TV does not seem to recognize chapter markers on the videos that I encoded in Handbrake. If I open the file with Quicktime chapters show. On my 3rd generation and 2nd Gen Apple TV, they both show upward. But for some reason any 4th Gen does not recognize them.

  I have other files that do not seem to work, but those that have been converted to MKV using iFlicks. So I don't know if it's something odd with how Handbrake encodes the markers or what.

  Make sure that you have given the track chapter language.

• You can add chapter markers... I know they went from iMovie 10.1

  Very frustrated with the iMovie 'upgrade', but I have already imported and edited the video so new that it is not possible to go back to the old backups. My frustration is the lack of chapter markers. If I want to burn to a DVD or look in other software, I would that the ability to jump quickly between specific scenes in a video of 1 h. For example, I have a video of dozens of swimming events. My girls love to watch their races to watch their technique, and they often want to attend a race several times given. I just want to be able to hit 'new chapter' and be at the start of a particular race. Since iMovie 10.1 can no longer do this, I'm looking for other solutions... without having to invest hundreds. I tried to import into GarageBand (an older version) and I think this might work (my version of exports still GB to iDVD), but the timeline for Go is kind of awkward to find exactly where I want to place markers. So, although I might end up here, I hope to other solutions.

  I found Subler.  I have tested it on a file exported .mp4 but it seems to work well (even after importing to iDVD).

• Move most adjacent flex markers in one step

  I can't find the way to go, say, 2 or 3 markers of adjacent flex by selecting and moving them in a single step.

  Is it not possible?

  If you hold down the command, by default it should give you the marquee tool.  Use to slide over and "lasso" in all the markers you want.  Then you will see an icon of the hand, allowing you to move all at once.

• Export of multiple markers in mode of arbitrary waveforms

  I use the example Fgen Arb Marker.vi waveform (in the examples of LV2011) as the basis for the production of markers and exporting to PFI0 and PFI1 on a PXI-5422.

  I added a 2nd call of property node after the first configuration of marker1.  The program runs without error, but only generates marker0.  It seems that if I configure Active Channel as 'marker1' or 'marker2' or 'marker3' or 'marker4', the property node has no effect.  I expect that subsequent calls must set up additional markers.

  I used the script mode to configure several markers with my generator signal as well, but I'm trying to understand how things work in mode of arbitrary signals for some legacy code.

  

  So just to summarize, things that I confused me more than before and during this thread have been:

  1. lack of feedback of error/warning when configuring marker1-marker3 in wave arb mode

  2. the general statement "a marker by segment" seems inaccurate given the script arb mode

  3. script view arb is not mentioned in the PXI-5422 or PXI-5421 hardware specification

  1. the Council supports 4 markers, numbered 0 - 3. So when you configure those, you do not get an error. When you configure marker4 you get an error because it does not exist.

  2. I think you are right, that the statement applies to arbitrary waveform Mode, no Mode Script.

  3. it's probably another problem of documentation. Script mode was not supported when 5421/5422 first came out, so my guess is that when a support because it has been added, the documentation was not updated.

  Good luck

  Marcos (not Marco )

• Start markers

  Y at - it a special syntax for charger property start and stop markers. I assumed that normal ascii would be OK, because the markers are specified in the dialog box.

  Thank you

  JVH

  Never mind...

  Mr. Duh strikes again.

  So, we cannot give any Oh! s, as well as congratulations.