Mask path is not correctly copy to a position of the Null object

Similar Questions

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• HP 640 c: HP640c cartridge does not return to its original position and the printer will be no print anything

  Printer cartridge does not return to its original position on the right side of the printer after the top cover is opened, with the resume light continues to Flash.

  After restarting the printer, the cartridge moves to the right, but not all the way and remained there when the printer is off.

  The printer will not print anything.

  How can I get the cartridge is positioned correctly?

  Solved the problem... it's a defective color print cartridge, which was the carrage Act strangely.

• Microsoft Streets & Trips 2005: the registry for this application settings were not correctly copied

  the registry setting for this application are not copied correctly run set up agin from the location you originlly Microsoft streets & trips2005

  Hello

  Check with streets and trips in support of the community and Forum.

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspx

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• Registry settings were not correctly copied from Streets and Trips 2011

  I recently purchased and installed Microsoft Streets & trips 2011 trying to open the program I get the response "your base registry settings were not copied correctly. To correct these settings, run Setup again for this application from the location that you originally installed". I tried to uninstall and run again, but the same thing happens. I already had streets 2008 which I uninstalled but do not know where I was this originally installecd - HELP

  Try this

• registry settings not correctly copied?

  I've been running Streets and Trips (2010) without problem, until today and all of a sudden get this error:

  "Your registry seetings for this application are not copied correctly.  To correct these settings, restart the installation of this application from the location where you originally installed it. »

  What does that mean?

  I've been running Streets and Trips (2010) without problem, until today and all of a sudden get this error:

  "Your registry seetings for this application are not copied correctly.  To correct these settings, restart the installation of this application from the location where you originally installed it. »

  What does that mean?

  Hello

  Please ask this question on the forum of Streets & Trips.

  Highway, Streets & Trips, MapPoint Forum:

  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Concerning

• My design dreamweaver css code is not correctly copy on my external program to send emails.

  I use a template and put the code in the program that I actually send the email through. I used a template, dreamweaver and css code is not all come through. When I receive the test e-mail in my Inbox, some parts are correct, but others are just completely false. I tried to figure out how to solve this problem, but I'm still new to dreamweaver and coding in general.

  Chances are that you try to process an html email as if it were a normal html page and left some of your css in thesection is stripped out of your e-mail client.

  It is difficult to say without seeing the code that you are handling well.

  HTML emails have a different set of rules than the normal html pages. Message from Nancy O here, explains a good part of it: HTML email & Newsletter blasts - http://alt-web.com/

• layer masks work does not correctly

  Help

  I use the layer mask, and all my settings are correct. The brush still shows the image, even if I'm brushing the image. What is going on?!!!

  Hello

  I was able to understand this madness.

  If you click color, and then click on the sliders in grayscale. You will see if your black is 100%. Which fixed the problem on my end. thanks for all the advice.

• Our HP printer prints not correctly copied images.

  Original title: print printer print

  We have a HP Photosmart D110 printer.  When you print the page comes out perfect.  When do black line copy is printed at the bottom of page.  It seems somehow light is done in our necessary adjustment.   help fk

  Hello

  ·         Since when are you facing this problem?

  ·         Did you do any change in hardware/software on the computer before this problem?

  ·         What operating system is installed on the computer?

  I suggest you contact HP support and check if that helps.

• Fans not correctly detect when you present to the RPM

  Why my 13 "2015 MB Pro fan not totally crank when the cpu temperature is like 100ᴼ? For example my CPU Core 1 is 80ᴼC and my Core 2 CPU is 100ᴼC, my GPU Core even 78ᴼC yet the rest fan 1300 rpm, whereas at this stage at 4000-6000 RPM.

  Is it because I have iStat Menus active? I put rules fan on this OFF application preference so he shouldn't meddle with the fan in addition to giving my sound status.

  I also wonder, Google Chrome would heat my laptop for the h

  Check your MacBook Pro with Apple Hardware Test if thermal sensor is something wrong.

• Help and Support does not work does not correctly when you are connected to the Vista administrator account

  Click the startup of Vista and in the Search box , type WINVER , and press the Enter key on your keyboard.  Please report back with the correctVersion number and build shown . Carey Frisch

  Version 6.0 (Build 6002: Service Pack 2)

  I have the same problem exactly as described Flashimator don't except this: the problem occurs only when I am logged into the administrator account.  Support seems to work normally in my user account.

  I should add that my HP laptop has an OEM program which seems to be an overlay on the Windows Help.  It is also not available in the administrator account.

  (HP Pavilion dv9260us, Vista Ultimate x 64, Intel Core 2 Duo T7200 @ 2.00 GHz, 2 GB RAM)

  Thank you.

  PS It is often more important to have help available when logged in as an administrator as I do only when I have to (as in the resolution of problems).

  Hi Dyn0saur,

  Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  Regarding your question, see the article following some possible troubleshooting for your question:

  http://support.Microsoft.com/kb/917607

  In addition, an article on content help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-the-latest-Help-content

  Thanks for visiting the site of the community of Microsoft Windows.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Values not correct SSL_VERSION in spite of what the doc said (11.2.0.4)

  Hello

  According to the 11.2.0.4 documentation, it seems possible to set the sqlnet.ora SSL_VERSION to certain values to be able to support TLS 1.0 or 1.1 or 1.2 protocols. However, in my tests, only the value

  1.0 (corresponding to TLS 1.0) works, any other combination will make the SSL connection to fail. I wonder if the doc is right on this point.

  SSL_VERSION

  Goal

  To force the version of the SSL connection. Clients and database servers must use a compatible version.

  By default

  undetermined

  Values

  undetermined | 3.0 | 1.0 | 1.1 | 1.2 

  If you want to specify a version or another version, use or . The following values are allowed:

  1.0 or 3.0 | 1.2 or 3.0 | 1.1 or 1.0 | 1.2 or 1.0 | 1.2 or 1.1 | 1.1 or 1.0 or 3.0 | 1.2 or 1.0 or 3.0 | 1.2 or 1.1 or 1.0 | 1.2 or 1.1 or 3.0 |1.2 or 1.1 or 1.0 or 3 

  Example of

  SSL_VERSION=3.0 

  So all what SSL_VERSION (server side) = 1.0 will not work. I do not force any SSL_VERSION setting in the client, and the client and the server are 11.2.0.4

  It should work, but it does not work.

  Any idea on this?

  Kind regards.

  TLS 1.1 and 1.2 are not available in 11 GR 2 and yet, only 1.0 works.

• Just a page with some pictures and text... does not correctly. A photo 'draws' to the bottom of the page in the same position and the other half are not displayed

  site in question: men of honor

  the top of the page "cover" image and text below are correct, however less than I have about 10 photos in 2 columns. They are simply placed in it with a text description above them. When you scroll, the right image at the top pulls the bottom of the page and the right side of half the images never load!

  Ive downloaded the site repeatedly deleted the offending (via FTP client) html page, renamed the reuploaded page and deleted this image/saved/transferred (still don't get any image on the right) and tried to replace the image still/economy/download. etc.

  NOTHING WORKS!

  Please check all the picture frames overlap, so if any scrolling etc. is applied.

  If that didn't work, then I need to display the file.

  Thank you

  Sanjit

• 33 Firefox does not display a pdf file when using the response object

  33.0.2 Firefox does not display pdf files by using the code below in an asp.net program, that works for the previous versions of Firefox and also works with IE. I'm using the built-in pdf viewer. All my plugins are disabled.

             Dim strPDF As String
             strPDF = Session("filname")   'pdf filename
  

             Response.Clear()
             Response.ClearHeaders()
             Response.Buffer = True
             Response.ContentType = "application/pdf"
             Response.CacheControl = "Private"
             Response.AddHeader("Pragma", "no-cache")
             Response.AddHeader("Expires", "0")
             Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
             Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
             Response.WriteFile(strPDF)
  

             Response.Flush()
             Response.Close()
             Response.Clear()
             Response.End()
             Session("filname") = ""
  

  What is the result of this code that Firefox receives through the headers of HTTP response if you check that the Live Http Headers extension?

  • https://addons.Mozilla.org/firefox/addon/Live-HTTP-headers/