Masking and bug tracking

Similar Questions

• Movement of mask and the track Matte Question - why it doesn't work?

  Hi first gurus...

  I am able to use the first titration module - to create a mask - then the Luma put on the effect of TrackMatte to isloate a region of the video (I duplicated the original) which I am interested.

  -By of many tutorials/videos online, I've found.

  Question: Why - can I not use the mask / "exit" from the ThreeWayColorCorrector to do the same thing?

  Image - duplicate the clip - drop the ThreeWayColorCorrector - using "High color" mode - to isolate people form (from an extract of the interview);  the background is black... the contour hair root and the body of the interviewee is white.

  I get white/black - because I passed the exit of the ThreeWayColorCorrector to 'mask '...

  Now - when I drop this clip on my video editing - that I use for the TrackMatte effect - it does not work as I had expected, it could - at all...

  Very disappointing - it would have been a very powerful way - to create a mobile cache to work with the TrackMatte effect...

  If someone has done something like this before? Y at - it an easy solution - or a setting that I missed...

  This should work really - not?

  Some information:

  I work with a GreenScreen shot - with lighting poor to separate the hairline of the screen.

  Work with green screen - subject to blonde hair.

  I thought that the retro-lighting/hairlight was not necessary - I was wrong.

  Now with the green screen hidden using this ultra key - get jagged effect around the airline and what looks like the snow and noise around the fringe.

  I thought en - 1) video duplication and combining with effect 2) TrackMatte - use a mobile mask that matched just the root of the hair/plan - I might be able to blurr the edge enough to get rid of the unpleasant effect I see...

  As BIG as the UltraKeyer is - different parameters of transparency/spill/Starter/soften seem not to be able to remove the ugly/noticeable hairline artifacts that I see...

  New - look like jagged effect / snow...

  Any thoughts?

  
  Thank you

  F

  In my opinion, the track-bearing on Pr capabilities fall away from the brand.  The fact fcp7 as it is very useful.  The limitation of the matte in public relations is that the mast is adjusted on the layer is hidden.  You can animate and change the scale and position of the track matte layer, but if you want it to run in smooth synchronization with the matted layer, you're in for a bit of work.  Ideally, you should be able to pan and adjust the layer being hidden inside a motionless mask.  Can-do that elegantly in PR.  This is a faulty design of the Pr, IMO.

  As a general rule, you must go to EI for the good contols, where you have all the power of masking you need, with the exception of the variable feathering, and who is rumored to be included in AeCS6.  Also it would be nice to be able to follow the points of mask, which is not currently in Ae either.  But that's another debate.

  That said, I am able to use the mask to a secondary use as a Luma matte.  Not sure why it does not work for you.  Have you played with the secondary commands sweetness?  I couldn't even be after what is your problem.

  However, here is a tip that I use with Ae that might work for your problem of inlay.  Use two instances of the Keyer.  Use all first to create a "garbage" key, where you will have the most greenery, leaving only a border around your subject.  Then, you can use the second instance of the Keyer to hone in on the edges.  Give it a shot.  Might work for you.  This method gives you an option to avoid the harsh cleanup settings of Matte with eradicating all the Greens in a framework.

• After Effects masking and tracking of a whiteboard

  Hey all

  I really struggle with an ongoing project...

  In my film, I have people holding a white board with a black frame. The sentences are written on the white area.

  Some of the writing on the Whiteboard is not visible because light bounces off it...

  I need to hide the Whiteboard area and it follow the Board changes slightly with the movement of people and then add some text in the mask...

  I have to create a mask and then add a layer of shape on it... If so how can the shape layer follow the mobile layer mask?

  or I'm going in the wrong direction with this?

  Any help would be appreciated.

  Thank you

  I would use this technique:

• Firefox not displaying browser doesn't not Apex Bug Tracker App icons

  HI -.

  I use canned Apex Bug Tracker App version 2.0.12 with updated Firefox ESR 31.7.0 on my Windows 7 PC and icons that are supposed to appear on the left side next to the links of 'Home', 'Products', 'Bugs', etc. in the App are not there, only a square with hexagonal numbers it appears to place the icons.

  It's really ugly and it makes users confused about if there is another set of button pressing.

  I also have IE8 (8.0.7601.17514) on my PC. It has the reverse problem where it shows the icons but interfere with the 'Home', 'Products', 'Bugs' etc. captions.

  Is it a browser that keeps Apex Bug Tracker app has been designed to support?

  Dan Nygren

  ,

  The solution is that Apex displays icons using a custom font, and Firefox was not downloading and using this custom font because Firefox is configured to use my fonts favorite instead of the police of the page.

  Difficulty click on Firefox in the menu top of the page:

  Tools-> Options-> Fonts and Colors (Advanced)-> Select checkbox "allow pages to use their own fonts.

• Timeline between video and audio tracks splitter

  The separator between the video and audio tracks on the timeline is very difficult to see. Although it is thicker that other lines of demarcation is not yet clear enough for many people. Y at - it anyway to change the color of the "divider". Does anyone know of a plugin or a workaround may achieve this result? Ideally, we should be able to change the thickness and color so that the timeline between the video and the audio division are visible immediately by glancing at the screen. Can anyone help?

  Unfortunately, no thickness and color cannot be changed, and I've never seen a plugin to enable this. Sounds like a feature request for me!

  Feature request/Bug Report Form

• Box pen for mask or bug problem.

  Hello

  When you make a mask on a layer in Photoshop and in the properties of the mask we put pen to paper to any value (say 40px) so the result is a soft mask.

  So far, everything is good.

  However, when the file is saved (as a psd) and placed in Indesign or previewed in Finder, the pen is a party!

  If I download a copy in jpeg of this file, the result is also bad (sharp edges)

  If I flatten the image and save in any format I like, the result is good (edges)

  If I make a mask and brush inside with a soft brush (let alone mask properties) the result is as good.

  We used to use this function a lot before and now for some unclear reason it can no longer be used.

  Is anyone able to replicate this? Is this a bug? Is there a solution?

  We have it on al our 6 workstations, all iMacs running El Capitan and last Photoshop CC (2015.1.2 Release;) 2016113.r.355 x 64)

  The image with the fuzzy circle, that's what it should be, the image with the circle of sharp is the result of what should not be.

  

  Known issue.

  Workarounds include turning off "Maximize compatibility" or by using the mask on a group instead.

• I see no mask and follow up on first CC 7.2.1

  Please help I can not find masking and tracking tool first CC 7.2.1

  Hello

  Masking and follow-up are a feature of first Pro 8 (CC 2014). It never is in first Pro 7 (CC).

  Thank you

  Regalo

• Mask and followed does not

  Hi, I have a problem trying to make the mask & follow the new feature to work. I draw the mask and when I press on the track, there's no progress. I can always follow farm frame by clicking on the arrow of the next frame, but obviously, this isn't the way I want to do because it takes me forever.

  This new feature will really simplify my workflow and I find it quite frustrating to make it work.

  I work on 1080p25 fps on Apple Pro Res 4.2.2 and I also try used DSLR footage with no luck either. Using a Mavericks Pro on Mac

  Thank you

  Make sure that you do not have "Reference monitor Gang" checked in a reference check or monitor Monitor window. Mask of tracking does not work when this field is selected. Once disabled, mask of follow-up should work fine.

• Map Module: How the "Next Track" and "Previous track" used?

  I shoot with multiple cameras with a parallel tracklog in a Garmin GPS unit and think that this feature can be useful, but there never seems to be enabled. How and when it is activated? It would be nice to have an easy way to scroll the ratings the way I imported without having to pick them through the most recent or the file system.

  Thank you!

  As far as I KNOW, the "Previous track" functions and "Next Track" allow you to scroll through all the separate tracks within a single tracklog.

  I think that the terminology can be kind of confusing.  There is 'tracklogs", which are the GPX or KML files.  Then there's "leads," which are the individual legs of data stored in the tracklogs.  I think that most people probably just record a track by tracklog, but hypothetically, you can record several tracks in a single tracklog.

  So, let's say you are on a shoot outside and you record your GPS tracks.  You thousand hiking, stop the track and then start a new track in the same tracklog.  This would give to ultiamtely you a single 'tracklog' file which contains two separate "tracks".  In this case, orders of "Next Track" and the "track" would let you switch between the two separate tracks in the tracklog.

  In short, my impression is that the "previous track" / "Next Track" only functions to navigate between multiple tracks in a single tracklog.  They don't allow you to scroll your tracklogs.

  I remember messages for a long time on this issue. People are wondering why the "previous track" / "Next Track" commandments were grayed out and wondering if it was a bug.  I don't know if they just misinterpreted these commands as switch between tracklogs instead of titles, or if the duties were actually not work correctly with tracklogs that had several tracks.

• problem with masks and effects

  OK, I have a solid layer with a mask in the solid is a film clip

  so when I play video I see a form colored on top my film clip

  Now if I apply an effect to the solid and then I see the effect in the colorful form ontop my film clip

  except when I apply my "cloud bcc7" effect, when I do that the clouds fill the entire screen

  rather than stay with in the mask

  Why would it be

  see you soon

  Rendering order. You can precpose or you can add effect to a solid under your layer mask and use the mask as an alpha matte. This isn't a bug.

• Custom problem with CFINPUT, masks and onFocus events

  I'm running into an interesting problem, I found a bug in ColdFusion MX 7.0.2 on Windows Server 2003. I have a CFINPUT field with a mask and an onFocus event. When the page is rendered, however, the resulting HTML code has two events onFocus with my called twice and the mask function, called only once. I was able to work around this problem, but it is kind of annoying. See the example below:
  
  

  It's not a bug it's a feature, depending on your point of view. Focuses on the first field with a mask using the mask attribute. Your code runs subsequently.

• I get the following message:-Firefox 35.0.0.5486 this new version of Firefox contains important security and bug fixes and page offers much improved making it

  I have received several messages inviting me to download the software updates that I use. I think they are attempts to get help with phishing or such. The last "software update available" amplifies - "this new version of Firefox contains an important security and bug fixes, and much improved page rendering times offer." Is generated by anyone at Mozilla, or automatically in Mozilla? Mozilla distributes these types of messages? That Firefox is updated automatically, then these messages should have no useful function except to help with the download of some intrusive camera, which I did not need. Are there plug-ins that I should throw?

  Upgrade to Firefox 35 is currently limited and not everyone gets the new update offered at this time.
  If this is the case for you, then you can manually update via help > topic.

  See also:

  • https://www.Mozilla.org/en-us/Firefox/35.0/releasenotes/
  • https://www.Mozilla.org/en-us/Firefox/all/

• Layer masks and blending modes

  I read on the layer blending modes in Photoshop CS6: The Missing Manual, p.121.  They talk about setting exposure using the blending modes, and they show how to darken an image by using the following procedure.  (1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value.

  My impression is that blending modes change how the pixels on one level interact with the pixels on the next lower level; that is, it implies there are at least two layers of the image.  So I'm not surprised that if I have a single layer without a mask and I change the blending mode from normal to multiply, it is without effect, probably because there is no immediately lower level to allow interaction.  However, if I have a single layer and create a layer mask, then changing the blending mode from normal to multiply darken the image.  That must involve the pixels of the layer are interacting with transparent pixels on the mask.  What?

  Can someone explain what is happening in reality not here?

  Use layer blending modes, you need to the two layers less.

  As you mentioned above:

  '(1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value'

  step 2 means create a levels adjustment layer that comes with a default mask if you want to make local adjustments.

  in this case, if you have a layer and add an adjustment layer, it works as if you duplicate the layer.

• I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  Look under Tools.

• Several masks and reversed

  I added a mask and it reversed and want to get the same effect on several masks, but when I put all others to just subtract makes black instead of use the effect. What should I do?

  Screenshot for reference:

  

  No need for an adjustment layer. The screenshot is not very clear, but you applied hue and then seven masks but only mask 1 is selected in the effect of the composition.

  Here's how to do it correctly. Draw your seven masks. The mode of addition for masks will give you seven circles. Change the mode to subtract and you will have seven holes in your layer. Now apply the tint effect and her centrifuge Compositing options and tap the + 7 times for all seven masks as composition of the layer options. EZ, quick and for this purpose better than an adjustment of the layer.

  When you have problems with an effect or a procedure the first thing you can do is to select the layer and press the U key twice to reveal all updated the layer properties. If the solution is not obvious, and then type the name or the effect, or the procedure you use in the field search for help in the upper right of the AE and discover the resources of the community. You will find generally better training than if you just start poking around Google or YouTube. You have your trainers to sift through and make sure that they know enough for you point to the effective techniques and good workflow. About half of the training on YouTube isn't very good and there are a bunch of it that will teach you bad habits and terrible workflows.

  Just in case where you're not the explanation here is what should be your model.