Movement of mask and the track Matte Question - why it doesn't work?

Similar Questions

• Global and Local variable... why it doesn't work?

  I'm confused.  .__.

  haha

  in any case, I wrote a class for my AS3 flash game.  It's that everything works well until what I called a method and got an error message.  After a bit of debugging, I was able to determine that my problem is when I try to assign a global variable (and the class property) to a local value, within the service itself, where the local variable.

  Here is part of my class:

  Sheet/public class extends Sprite {}

  private var number: int;

  private var sourceBitmap:Bitmap;

  private var sourceBitmapData:BitmapData;

  private var tileWidth:int;

  private var tileHeight:int;

  public void {sheet (number: int, tileWidth:int, tileHeight:int)}

  This.Number = number;

  this.tileWidth = tileWidth;

  this.tileHeight = tileWidth;

  displayImage();

  init();

  }

  public void displayImage() {}

  var imgLoader:Loader = new Loader();

  imgLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, done);

  If (number > = 100) {}

  imgLoader.load (new URLRequest("CharSprites/Female/"+number+".png"));

  }

  else {}

  imgLoader.load (new URLRequest("CharSprites/Male/"+number+".png"));

  }

  function done(evt:Event):void {}

  var myBit:Bitmap = Bitmap (imgLoader.content);

  addChild (myBit);

  this.sourceBitmapData = myBit.bitmapData;

  trace (this.sourceBitmapData);                                              ... sourceBitmapData are here

  }

  }

  private void init() {}

  trace (sourceBitmapData);                                                       sourceBitmapData is null here

  }

  }

  }

  I thought that I was able to assign the value of hard bitmapData to a property class (global variable) inside a function and have it exists outside.  I was wrong?

  How do I get around that?

  I know that I can write a function to return the Bitmap image, but as the function is called after the EventListener and depends on my charger, I don't know how to get around this problem.

  Thank you very much!

  Ya. My recommendation is to delay your init() function call until your image will load. So just move the call to init() in your service done or what needs the bitmapData to your function made move.

• Fast track matte Question Please Help!

  Hey there,

  I'm dealing with composting 3d with live footage...
  What I am now is match the shade with the actual pictures.

  After the 3d, I realized theres a few things shadow little, I need to adjust so I fig I'd quick false shadows in EI use feathers with a slight opacity masks.

  I ran into a problem...

  I'm taking my shadow solid feathers and apply it only to my 3d, not my live images.
  I tried to put the layer of shadow on the center of gravity and then giving the cg an alpha inverted matte but all track what was making my completely transparent shadow.

  How to go about adding a layer on a solid and have it does not not others? Thank you

  -Mike

  You must create a matte of the 3D layer.  Duplicate your layer 3D and place double above the solid to feathers.  If your time line contains, in order:

  Layer 3D (Duplicate)

  Solid shadow to feathers

  3D layer

  Now the value of the track matte of the solid to feathers Alpha Matte.  It should automatically turn off the visibility of the double 3D layer and use the alpha channel of this one to limit the shadow layer.

• How can I move these indicator and the control to another page?

  How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

  Or I want to hide them Kontrol page, how can I do

  Thank you

  Hi q8.

  move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

  Hide: Terminal controls (!) right click, select "hide"...

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Why is the track matte column completely empty, matte is not possible

  Hello, I have an ongoing mystery. I want to follow a layer matte 9 and 10, but all of a sudden the option to keep track of the layers masts is not available for all layers of the model.

  As you can see on the photo matte column any track is emty. Anyone has any idea how this is possible and how to fix it?

  I work with AE CC 2014 on windows 10, all layers are 3D

  Thanks in advance!.

  

  You have your publication set to use the ray-traced rendering engine? If so, that's your problem. You need to precompose to use caches or switch to the standard rendering engine.

  If you can, I would like to start weaning yourself on the ray-traced rendering engine: http://motionworks.net/after-effects-3d-future/

• Movement of masking of the Code between environments

  I move code between home and the office, and one of the annoying problems I'm having with Dreamweaver CS3 is that when I reduce the code on 1 environment, everything is great, but once I move this code to another environment, the code of the opening page gives a long message basically "we don't know where your drop-off points are more and will just expand everything." , in essence, lose my points of fall.

  Is there a way I can include some meta data are necessary to keep the drop points between the moving code from the environments?

  Actaully, I finally found the data.  An installation by default on Windows 7, it is located in the:

  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver9\Configuration\CodeCollapse\Cache

  It's XML stored as a .mcc (the Macromedia Code masking)?  I just save this info and move it.

  NOTE: the part of the XML file uses a full path to the files with codes of collapse in them, so you must make sure that the path between the environments are exactly the same, or it won't work.

• Target subnet mask and the gateway in different subnets and clock error

  Hi all:

  Need help. I have a standalone PC operating a direct VI on a CFP with a crossover ethernet cable (developed on my laptop, compiled and installed as a standalone on the PC). When the VI runs on standalone PC version, everything works (click the button, analyzers are read), but the time being pulled from the CFP is wrong, and infact resets to December 1969, a default value. I am error checking, and no error is marked with the CFP, slaughter programmes. When I go to the MAX function, the time playing of the CFP is the funky time. Looking at the IP addresses, I generally use a very standard protocol (192.168.000.001 for the PC, 192.168.000.002 for the CFP currently running on the subnet for the pc and the PSC 255.255.255.000). However, when I apply this Protocol on the CFP through max, it gives the error "the subnet mask you entered puts the target and the entry door to different subnets." I am not versed enough well understand this, and what I read in 2 postings here, I tried to harmonize the IP numbers and the subnet, and they do not seem to help. When I put intentionally in false numbers IP or subnet default time synchronization time correct (pc), but functions block (as expected). It is certainly not an issue of PC zone.

  Anyone can offer any guidance?

  Currently runnig LV 8.2 with drivers of 2009. PSC 1804 with MAX 4.6.

  I appreciate all help.

  Best regards;

  GIS.

  OK, I solved it. FYI: for those who are not aware of the IP: IP of the host and default gateway server to the same value. My work for the host computer are 192.168.000.001 and subnet masks can stay 255.255.255.000. The CFP has been set to 198.162.000.002 with a 90.00.00.03 DNS. Time server has been blocked by the Norton 2009 Firewall (even with an exception) and thus the cruxt of this issue together. I had to uninstall completely from this "software". I hope this helps.

• How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

  My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

  pjrl

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• Mask and the magic wand in the Select

  In Using Photoshop / select and mask Workspace for 2015.5 CC, it is said after the launch of Select and mask workspace allowing, "a selection tool such as the Lasso, magic wand, or quick selection. Now click on select and mask in the Options bar. "But when I run S & M, the magic wand is not available. Is it possible to add it?

  Martin

  If you mean the magic wand tool, no. There is only the regular lasso tool and the quick selection in the selection and the mask tool.

• How can I move my images and the drop down menu to my form dynamic after you start textflow to the partform option, content: textflow?

  I m looking for this information about 2 hours. It sounds simple but I can´t find a way that allow the think in my forms automatically adapt the appearance if someone adds new lines in the paintings and the possibility to have more distance between fields at the same time.

  I hope I could explain my question sufficiently...

  I use a windows pc with adobe acrobat pro dc and cycle 7 Direct designer ES 4.

  Thank you very much for your help.

  [Moved to the Forum LCD]
  

• Application of expression about the masks and the anchor point

  Hello world

  As im new to expressions I'd like know if there is one that might place the anchor point in the middle of the left and right points masks.

  So, essentially, it would be something like:

  The fair value of mask, subtract the mask from left value, divide the result by 2, and add the result to hide the left value. and the end result would be the anchor x value.

  And then the position values would need to be updated as well

  .

  This image shows an image divided into 10 parts by use of the mask, each section has its own layer to manipulate individually

  I wish that the anchor points to around the middle of the original image in the middle of each of the hidden sections. See the 2 pictures below.

  

  (only 3 Articles visible on this image) Section to the left's current layer.

  Anchor is sitting in the Middle now, id like it to sit in the middle of the left section, where to point the arrow. The section should stay where it is now, then the position values would need to be updated as well.

  

  Another example, it is the right, in all, there are 10 sections of mask.

  

  Each section has its own layer to manipulate individually.

  In the end, I'd like to do a rotation effect sections on their axis Y similar to these billboards with several ads on them. See the link below

  http://www.YouTube.com/watch?v=JlZIM6PO0Oc

  Hope this is clear enough?

  Thank you guys.

  Effect--> Transition--> card Wipe. For the rest - no, you can't access mask given with expressions. Only scripts can. It's a moot point, though. If you know the width of a band or it can calculate somehow, the course will be one way or another...

  Mylenium

• The plans of work and the canvas color questions

  Downloaded the 2015 version of Photoshop and the problems with the color of the cloth and work plans. Work plans are displayed on a white background. I tried to change the color of the canvas by a right click and also through preferences > Interfaces but nothing has changed. Can someone advise?

  The preferred mode for work plans is:

  (1) preferences > performance > use the graphics processor = WE

  (2) the preferences > performance > avancΘs > draw = Advanced Mode

  (3) the RGB documents

  Other adjustments can result in a degraded experience. Work plans still work, but they can rate a part of the 'Visual' sugar

• all my desktop icons and the program are the same and the habit of open.why?

  I uninstalled a few programs.after that all changed my icons and open.how used I can solve this

  Hello

   
   
  Have you done any software or changes to the material on the computer before this problem?
  
   
  Method 1: First of all, I suggest you perform a virus scan on your computer online by visiting the following link:
  Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  
   
  Method 2: Run the following Fix - it and check.
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  If the problem persists, then follow hide icon to rebuild the steps mentioned - below
  a. click Start, then Control Panel and write in the search folder optionsbox.
  b. now, click on Folder Options to open and select (dot) show hidden files and folders.
  c. open a Windows Explorer window.
  d. go on C:\Users\(User Name) \AppData\Local
  e. right click on IconCache.db , and click Remove.
  f. click Yes to confirm the deletion.
  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.
  g. close the window.
  h. emptying the trash.
  i. restart the computer.
  j. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date.
  NOTE: If for some reason any IconCache.db isn't there or the size has not much changed then you can just restart the computer again. You may need to restart a few times in some cases.
  k. icon cache will be rebuilt.

   

   

  Method 3: If the methods above do not help, you can check if the link helps you solve the problem.
  http://support.Microsoft.com/kb/950505

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions