Masking and unmasking worksheets using VBA

Similar Questions

• masking and unmasking of the arbitrary nodes in a graph of scene with animations

  Could someone point me on how can I dissolve (or any other animation effect), an arbitrary (and its children) node in the graphic scene when I click some tag? And how could I show them, also with animation, when you click the label again?.
  
  I think using a label as hyperlinks have a boring rectangle that surround them. Is it okay to use a label for what I want? If a hyperlink is preferred, how I could hide the rectangle surrounding by default? (I think it means that the hyperlink has focus).
  
  Thank you!

  Use FadeTransitions to hide and unhide nodes.
  There is sample code in the Animation Tutorial and the sample of the whole:

  http://docs.Oracle.com/JavaFX/2/animations/basics.htm#CJAJJAGI
  http://www.Oracle.com/technetwork/Java/JavaFX/samples/index.html

  You can use a label with a mouse event handler set to trigger the fade.
  Although there are many other ways to allow a user trigger an event and just with the help of a label will not provide the user with visual feedback that they can interact with it.
  The control that would reflect more the State of the function of masking would be a ToggleButton control.
  What control you use depends on the look you want to achieve.

  You can customize the appearance of the focus of a hyperlink ring (or remove) using CSS.
  Search the following documents for the hyperlink:
  http://Hg.OpenJDK.Java.NET/openjfx/2.2/master/RT/raw-file/tip/JavaFX-UI-controls/src/com/Sun/JavaFX/scene/control/skin/Caspian/Caspian.CSS
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/scene/doc-files/cssref.html

• Masking and unmasking MovieClips

  I have two images on top each other and when you click on the small image to enlarge the picture shows.

  But how to make the image to return to the smaller image when it is clicked on the cotyledon.

  myTend.addEventListener (MouseEvent.CLICK, makeBig);

  function makeBig(event:MouseEvent):void

  {

  if(myWater.alpha ==1)

  {

  myTend.alpha = 1;

  myTendClip.play ();

  }

  Else if (myTend.alpha == 1)

  {

  myTend.alpha = 0;

  }

  }

  If you want to make the others appear and make disappear you should probably use the visible property rather than the alpha property, especially if they are sitting on the other.  If you use alpha and they are sitting on the other, you are always clicking on one located on top, because alpha is not make disappear.

  Then you do what you say you want to do, make the user has clicked one disappear and the other appear...

  
  myTend.addEventListener(MouseEvent.CLICK,makeBig);
  function makeBig(event:MouseEvent):void
  {
      myWater.visible = true;
      myTend.visible = false;
  
      myTendClip.play();
  }
  
  myWater.addEventListener(MouseEvent.CLICK,makeSmall);
  function makeSmall(event:MouseEvent):void
  {
      myWater.visible = false;
      myTend.visible = true;
  }
  

• Use VBA and Excel to open Dreamweaver HTML (CS5), search and replace text, save and close

  I would use VBA and Excel programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the view code in these files, save and close them.

  I have 5000 associations between find: x 0001 and replace: y0001 in an Excel sheet.

  I have written VBA but do not know how to open, close and save the code in the .html files view. Please... and thank you...

  [email protected]

  I use ASP.net for backend coding, I use PHP. If you want to stay with Microsoft technologies, and then you would like to use ASP.net. and a Microsoft server.

  When you have a Web site that contains many pages with similar content structure, the practice is to store all content and all variables in a database. It is possible to create a site that has hundreds of 'pages', with many variations in the pages, so they don't all look like clones, and yet all this might be based on a single web page. A website as Amazon.com has millions of 'pages', but may actually have only a dozen basic page structures.

  Convert what you now have a system like this would be a fair amount of work, but it's the way to go now.

• I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This happened on fo

  I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This has happened for a while.  Very frustrating!

  Adobe Creative Cloud to edge CC>

• Layer masks and blending modes

  I read on the layer blending modes in Photoshop CS6: The Missing Manual, p.121.  They talk about setting exposure using the blending modes, and they show how to darken an image by using the following procedure.  (1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value.

  My impression is that blending modes change how the pixels on one level interact with the pixels on the next lower level; that is, it implies there are at least two layers of the image.  So I'm not surprised that if I have a single layer without a mask and I change the blending mode from normal to multiply, it is without effect, probably because there is no immediately lower level to allow interaction.  However, if I have a single layer and create a layer mask, then changing the blending mode from normal to multiply darken the image.  That must involve the pixels of the layer are interacting with transparent pixels on the mask.  What?

  Can someone explain what is happening in reality not here?

  Use layer blending modes, you need to the two layers less.

  As you mentioned above:

  '(1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value'

  step 2 means create a levels adjustment layer that comes with a default mask if you want to make local adjustments.

  in this case, if you have a layer and add an adjustment layer, it works as if you duplicate the layer.

• With EM data masking and other utilities of security features available within the DB package

  Hello

  Please let me know your experience of the difference between EM data masking Pack and other security elements such as writing, available in the database Vault.

  Kind regards

  VN

  Hide data are used when you have to clone the database of production for developers. Its purpose is to sensitive data mask in the clone database and you can use several formats of masking (numbers random, random strings, shuffle of data, etc.).

  The masking process is irreversible. (http://docs.oracle.com/cd/E11882_01/server.112/e41481/tdm_data_masking.htm#RATUG04000)

  Writing of data (http://docs.oracle.com/cd/E11882_01/network.112/e40393/redaction.htm#ASOAG596)

  "Starting Oracle 11 g Release 2 (11.2.0.4) database, Oracle data writing allows you to hide (delete) data that are queried by applications or limited users." Drafting occurs in real-time when users query the data. Drafting of data Oracle is part of the Oracle Advanced security features. »

  In a nutshell, you create a policy of writing for a table using DBMS_REDACT package that will redact (mask) data for some users - depending on your political - select.

  For example, a group of users will not be able to view credit card numbers (1234 5678 1235 5690-> * * * 5690). Please note that the data are not hidden within the table.

  Database Vault is used to restrict powerful users (users with system privileges) to access some objects (and not only). Please see the DEMO on this link ( Oracle Database Vault |) Oracle database | (Oracle ) "

  • Oracle Database Vault (03:13)

• After Effects masking and tracking of a whiteboard

  Hey all

  I really struggle with an ongoing project...

  In my film, I have people holding a white board with a black frame. The sentences are written on the white area.

  Some of the writing on the Whiteboard is not visible because light bounces off it...

  I need to hide the Whiteboard area and it follow the Board changes slightly with the movement of people and then add some text in the mask...

  I have to create a mask and then add a layer of shape on it... If so how can the shape layer follow the mobile layer mask?

  or I'm going in the wrong direction with this?

  Any help would be appreciated.

  Thank you

  I would use this technique:

• Several masks and reversed

  I added a mask and it reversed and want to get the same effect on several masks, but when I put all others to just subtract makes black instead of use the effect. What should I do?

  Screenshot for reference:

  

  No need for an adjustment layer. The screenshot is not very clear, but you applied hue and then seven masks but only mask 1 is selected in the effect of the composition.

  Here's how to do it correctly. Draw your seven masks. The mode of addition for masks will give you seven circles. Change the mode to subtract and you will have seven holes in your layer. Now apply the tint effect and her centrifuge Compositing options and tap the + 7 times for all seven masks as composition of the layer options. EZ, quick and for this purpose better than an adjustment of the layer.

  When you have problems with an effect or a procedure the first thing you can do is to select the layer and press the U key twice to reveal all updated the layer properties. If the solution is not obvious, and then type the name or the effect, or the procedure you use in the field search for help in the upper right of the AE and discover the resources of the community. You will find generally better training than if you just start poking around Google or YouTube. You have your trainers to sift through and make sure that they know enough for you point to the effective techniques and good workflow. About half of the training on YouTube isn't very good and there are a bunch of it that will teach you bad habits and terrible workflows.

  Just in case where you're not the explanation here is what should be your model.

  

• Smart view Ribbon not displayed when Excel is called using VBA

  Hyperion dear gurus,.

  I am in need to call refresh smartview by calling excel with VBA from excel module in another sheet (master). But when I invloke Excel using VBA, smartview Ribbon not be enabled, because of which the HypConnect, HypVMenuRefresh command does not work. If I open excel directly and run the module, it connects very well and did the update with no problems. I tried to activate and deactivate the smartview using VBA, but it does not work either. If I call excel directly using a batch by using the call command, then it works fine, but the batch file does not close as if I use the ThisWorkbook.Close command, then it does not completely close Excel, the instance is running, and if I try to close it using Application.Quit, then it closes Excel completely. Any help would be much appreciated.

  Thank you and best regards,

  SiddN.

  Hello

  I was able to achieve this goal by using batch files by calling a excel models.

  Thank you

  SiddN.

• problems with masking and color CC2014 - no CC - see screenshots!

  Does anyone know this problem? In recent weeks, masking and using colors in CC2014 seems to work although more. When 100% of mask the masked layer is always displayed. When I use a color (with the pen or mouse) PSD slightly changes the color.  I am attaching two prints to show you what I mean. Did the same in PSD CC and there is no problem at all.

  

  Sound your layer mask.  This is not completely its not completely masking the area.  The black area is not 100% black his only reduce the transparency of the atea sahpe filling.  Just turn off the visibility of the cyan shape layer you will see that it has nothing to do with that layer and its surly white not the projection of bottom layer.   I use a setting of levels on your layer mask to darken the dark. Look at the result.

  

• Mask and followed does not

  Hi, I have a problem trying to make the mask & follow the new feature to work. I draw the mask and when I press on the track, there's no progress. I can always follow farm frame by clicking on the arrow of the next frame, but obviously, this isn't the way I want to do because it takes me forever.

  This new feature will really simplify my workflow and I find it quite frustrating to make it work.

  I work on 1080p25 fps on Apple Pro Res 4.2.2 and I also try used DSLR footage with no luck either. Using a Mavericks Pro on Mac

  Thank you

  Make sure that you do not have "Reference monitor Gang" checked in a reference check or monitor Monitor window. Mask of tracking does not work when this field is selected. Once disabled, mask of follow-up should work fine.

• Movement of mask and the track Matte Question - why it doesn't work?

  Hi first gurus...

  I am able to use the first titration module - to create a mask - then the Luma put on the effect of TrackMatte to isloate a region of the video (I duplicated the original) which I am interested.

  -By of many tutorials/videos online, I've found.

  Question: Why - can I not use the mask / "exit" from the ThreeWayColorCorrector to do the same thing?

  Image - duplicate the clip - drop the ThreeWayColorCorrector - using "High color" mode - to isolate people form (from an extract of the interview);  the background is black... the contour hair root and the body of the interviewee is white.

  I get white/black - because I passed the exit of the ThreeWayColorCorrector to 'mask '...

  Now - when I drop this clip on my video editing - that I use for the TrackMatte effect - it does not work as I had expected, it could - at all...

  Very disappointing - it would have been a very powerful way - to create a mobile cache to work with the TrackMatte effect...

  If someone has done something like this before? Y at - it an easy solution - or a setting that I missed...

  This should work really - not?

  Some information:

  I work with a GreenScreen shot - with lighting poor to separate the hairline of the screen.

  Work with green screen - subject to blonde hair.

  I thought that the retro-lighting/hairlight was not necessary - I was wrong.

  Now with the green screen hidden using this ultra key - get jagged effect around the airline and what looks like the snow and noise around the fringe.

  I thought en - 1) video duplication and combining with effect 2) TrackMatte - use a mobile mask that matched just the root of the hair/plan - I might be able to blurr the edge enough to get rid of the unpleasant effect I see...

  As BIG as the UltraKeyer is - different parameters of transparency/spill/Starter/soften seem not to be able to remove the ugly/noticeable hairline artifacts that I see...

  New - look like jagged effect / snow...

  Any thoughts?

  
  Thank you

  F

  In my opinion, the track-bearing on Pr capabilities fall away from the brand.  The fact fcp7 as it is very useful.  The limitation of the matte in public relations is that the mast is adjusted on the layer is hidden.  You can animate and change the scale and position of the track matte layer, but if you want it to run in smooth synchronization with the matted layer, you're in for a bit of work.  Ideally, you should be able to pan and adjust the layer being hidden inside a motionless mask.  Can-do that elegantly in PR.  This is a faulty design of the Pr, IMO.

  As a general rule, you must go to EI for the good contols, where you have all the power of masking you need, with the exception of the variable feathering, and who is rumored to be included in AeCS6.  Also it would be nice to be able to follow the points of mask, which is not currently in Ae either.  But that's another debate.

  That said, I am able to use the mask to a secondary use as a Luma matte.  Not sure why it does not work for you.  Have you played with the secondary commands sweetness?  I couldn't even be after what is your problem.

  However, here is a tip that I use with Ae that might work for your problem of inlay.  Use two instances of the Keyer.  Use all first to create a "garbage" key, where you will have the most greenery, leaving only a border around your subject.  Then, you can use the second instance of the Keyer to hone in on the edges.  Give it a shot.  Might work for you.  This method gives you an option to avoid the harsh cleanup settings of Matte with eradicating all the Greens in a framework.

• problem with masks and effects

  OK, I have a solid layer with a mask in the solid is a film clip

  so when I play video I see a form colored on top my film clip

  Now if I apply an effect to the solid and then I see the effect in the colorful form ontop my film clip

  except when I apply my "cloud bcc7" effect, when I do that the clouds fill the entire screen

  rather than stay with in the mask

  Why would it be

  see you soon

  Rendering order. You can precpose or you can add effect to a solid under your layer mask and use the mask as an alpha matte. This isn't a bug.

• Custom problem with CFINPUT, masks and onFocus events

  I'm running into an interesting problem, I found a bug in ColdFusion MX 7.0.2 on Windows Server 2003. I have a CFINPUT field with a mask and an onFocus event. When the page is rendered, however, the resulting HTML code has two events onFocus with my called twice and the mask function, called only once. I was able to work around this problem, but it is kind of annoying. See the example below:
  
  

  It's not a bug it's a feature, depending on your point of view. Focuses on the first field with a mask using the mask attribute. Your code runs subsequently.