masking and unmasking of the arbitrary nodes in a graph of scene with animations
Could someone point me on how can I dissolve (or any other animation effect), an arbitrary (and its children) node in the graphic scene when I click some tag? And how could I show them, also with animation, when you click the label again?.I think using a label as hyperlinks have a boring rectangle that surround them. Is it okay to use a label for what I want? If a hyperlink is preferred, how I could hide the rectangle surrounding by default? (I think it means that the hyperlink has focus).
Thank you!
Use FadeTransitions to hide and unhide nodes.
There is sample code in the Animation Tutorial and the sample of the whole:
http://docs.Oracle.com/JavaFX/2/animations/basics.htm#CJAJJAGI
http://www.Oracle.com/technetwork/Java/JavaFX/samples/index.html
You can use a label with a mouse event handler set to trigger the fade.
Although there are many other ways to allow a user trigger an event and just with the help of a label will not provide the user with visual feedback that they can interact with it.
The control that would reflect more the State of the function of masking would be a ToggleButton control.
What control you use depends on the look you want to achieve.
You can customize the appearance of the focus of a hyperlink ring (or remove) using CSS.
Search the following documents for the hyperlink:
http://Hg.OpenJDK.Java.NET/openjfx/2.2/master/RT/raw-file/tip/JavaFX-UI-controls/src/com/Sun/JavaFX/scene/control/skin/Caspian/Caspian.CSS
http://docs.Oracle.com/JavaFX/2/API/JavaFX/scene/doc-files/cssref.html
Tags: Java
Similar Questions
-
P2V one resource to Cluster MS and not to the cluster nodes
Hello!
We are looking to do a P2V on our file servers, which are all 2 node A / P SAN connected MS Cluster. I see articles where people work to convert the cluster nodes themselves and then have the MS Cluster running on ESX - this isn't what I want to do.
I've not seen any (covered by a research brief) mention of any attempt to make a virtual server Cluster MS. P2V conversion Looks like it is the best deal if it worked.
So I FS1 as the virtual resource with N1 and N2 as nodes. Can I run a P2V of FS1 crowd for a disk system to capture all the action, then just RDM the SAN LUNS to the VM FS1 newly created? Or am I stuck with the creation of a third node, clustered, expelling the original, closing nodes cluster services and then rename or uses DNS to point to the FULL FS1 domain name?
Thank you!
I know that sounds a good idea but any time
I tried P2V ING I ended up regretting the MSCS clusters. For the file
& Print sharing there is some direct negative side effects but for
The SQL cluster, it is very messy. You can not P2V the virtual server name
(FS1) directly, you must break the cluster and migrate the
individual nodes. But as I said it's a bad idea in any case.If these are just some cluster file server then the easiest thing to do
is just export actions (they are just a registry key), build a new
clean the VM, attach the existing data as a RDM disk and import the
registry keys. Once your happy that it work, rename the machine as
the former name of virtual node.http://ServerFault.com/questions/102271/P2V-a-MS-cluster-resource-and-not-the-cluster-nodesvmware
StarWind software developer
-
Masking and unmasking worksheets using VBA
I have a binder with 4 worksheets, namely master, Peter, Paul and Mary. The master of worksheet must be updated with inputs from Peter, Paul and Mary. I want Peter, Paul and Mary, to make their entries in their respective cards without seeing other entries. That is why, I want to hide all the three leaves and a person will be able to view only the leaves bearing his name. It makes the entry in its worksheet and its data will be copied to master using a macro. With the help of VBA, how to hide all three sheets so that one person can open the card for his name using a password? Thank you very much for the help. I know very little about VBA.
Try asking in the forums of Visual Basic:
http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral -
Masking and unmasking MovieClips
I have two images on top each other and when you click on the small image to enlarge the picture shows.
But how to make the image to return to the smaller image when it is clicked on the cotyledon.
myTend.addEventListener (MouseEvent.CLICK, makeBig);
function makeBig(event:MouseEvent):void
{
if(myWater.alpha ==1)
{
myTend.alpha = 1;
myTendClip.play ();
}
Else if (myTend.alpha == 1)
{
myTend.alpha = 0;
}
}
If you want to make the others appear and make disappear you should probably use the visible property rather than the alpha property, especially if they are sitting on the other. If you use alpha and they are sitting on the other, you are always clicking on one located on top, because alpha is not make disappear.
Then you do what you say you want to do, make the user has clicked one disappear and the other appear...
myTend.addEventListener(MouseEvent.CLICK,makeBig); function makeBig(event:MouseEvent):void { myWater.visible = true; myTend.visible = false; myTendClip.play(); } myWater.addEventListener(MouseEvent.CLICK,makeSmall); function makeSmall(event:MouseEvent):void { myWater.visible = false; myTend.visible = true; }
-
When I was installing windows. updated Shell32.dll at the point. I chose click try again several times and im guessing it worked cause he kept copy of files after that.
Is this a genuine Windows XP CD? Your cd may be dirty or damaged, or it can be caused by bad memory. See here for a list of things that can cause file copy errors: http://support.microsoft.com/default.aspx?id=kb;en-us; Q310064
Run a memory test on the machine, if the RAM is OK and if copy errors persist you can try to install a flat folder. To install from a flat folder see instructions here: http://support.microsoft.com/kb/315349 and here http://support.microsoft.com/kb/307848/EN-USJohn
-
Fact
Next time please describe your problem, with details of your situation, in the body of the message instead of the subject line. It makes it easier to help you.
What do you say 'downloaded program? What program? Operating system - XP - or something else? What kind of computer you have (make and model)? MS - MVP - Elephant Boy computers - don't panic!
-
slide show by using the keys on the keyboard for nav in flash professional CS5 with animated images
recently, I discovered how to create a slideshow using the keys on the keyboard for the market front and rear in flash professional CS5 thanks entirely to kglad of this forum. I used still images for each slide, since, then with one of the slides, I added a slight undulation of water in one of the images in a separate document. is it possible to include this file in my slideshow now?
original questions and answers using still pictures below
I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.
response
create tweens to fade for each slide. You'll probably want to fade out the image on image 1 (from frames 1 to 11). Bland-in the image of frame 11 frame 1 to 11. fade the image frame 11 11 to 21 etc.
You can then use:
var image: int = 1;
var dir:uint;
stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);
function downF(e:KeyboardEvent):void {}
{if(e.keycode==Keyboard.Left)}
dir = Keyboard.LEFT
Frame = Math.Max (Frame-10, 1);
this.addEventListener (Event.ENTER_FRAME, nextF);
} else {if(e.keyCode==Keyboard.RIGHT)
dir = Keyboard.RIGHT;
Frame = Math.min (this.totalFrames, Frame + 10);
this.addEventListener (Event.ENTER_FRAME, nextF);
}
}
function nextF(e:Event):void {}
{if(dir==Keyboard.Left)}
prevFrame();
} else {}
nextFrame();
}
{if(this.currentFrame==Frame)}
this.removeEventListener (Event.ENTER_FRAME, nextF);
}
}
you have the fla that created the swf file?
If so, just copy images from this fla and paste into a new movieclip in your fla slideshow. Add this movieclip to your timeline.
-
If/else statement in the MathScript node
I want to write if/else statement in MathScript node.
If (Yes is Yes)
{
a = 0;
}
other (no = no)
{
b = 1;
}
'Yes' and 'No'--> of Type String
'a' and 'b'--> Type Double
Hi johndoe.
Thank you for contacting National instruments.
I would like to highlight a number of items which you may find useful for the implementation of an if-else statement in a MathScript node. The first is a book white tutorial, which the second part explains how to use LabVIEW MathScript node. The second is an article describing the required syntax to write functions and scripts in the MathScript node, including instructions for the use of the If-Else statements.
I hope that these help. Please let me know if you need additional assistance.
Kind regards
James
-
Initialization of an array to match another size of array using the formula node.
I want to get a few different pictures of the same length and constants in the formula node and output a table corresponding to their length after some minor calculations. Another post, I discovered that I can simply initialize the table as such:
float pp [100];
The problem is that I find myself with a much bigger picture than what I need. I want to do is something like:
float [n] pp.;
where n represents the entry of an array size in the form node or is something like:
n = sizeOfDim(td0,0); Here I use a table 1 d
None of these methods seem to work. How do I initialize my picture 'pp' such that it matches the length of array 1 d of "td0?
The more likely your initialization externally. Create an entry named pp and wire td0 inside as well. Now create an output with the pp even name and it will contain an array of the desired length. Of course, this assumes that you want to edit all items in pp. Otherwise, just use initialize the array to create a new table and feed in the length of td0, and whatever default value you want (ie. 0 or NaN). The blank values will keep this value after the node of the formula.
-
How is the bow sheet 12 c Flex cluster connected to the Hub node?
In 12 c Flex, Oracle said that we can install the database of 12 c in hub node and nodes leaves are clients of the DSO.
I want to know if I can configure my application as terminal node servers? Is it possible for me to have my terminal node that is configured as an application server and talk to the Hub node which is the database?
In addition, how the terminal node communicates with the Hub node? Thanks to a private interconnect? or through something else?
I'm sorry that I couldn't quite find the documentation for allowing me to understand these two things.
Thanks in advance!
Refer to: http://m.blog.itpub.net/17252115/viewspace-1409722/
It can help you understand hope it
-
Layer masks and blending modes
I read on the layer blending modes in Photoshop CS6: The Missing Manual, p.121. They talk about setting exposure using the blending modes, and they show how to darken an image by using the following procedure. (1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value.
My impression is that blending modes change how the pixels on one level interact with the pixels on the next lower level; that is, it implies there are at least two layers of the image. So I'm not surprised that if I have a single layer without a mask and I change the blending mode from normal to multiply, it is without effect, probably because there is no immediately lower level to allow interaction. However, if I have a single layer and create a layer mask, then changing the blending mode from normal to multiply darken the image. That must involve the pixels of the layer are interacting with transparent pixels on the mask. What?
Can someone explain what is happening in reality not here?
Use layer blending modes, you need to the two layers less.
As you mentioned above:
'(1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value'
step 2 means create a levels adjustment layer that comes with a default mask if you want to make local adjustments.
in this case, if you have a layer and add an adjustment layer, it works as if you duplicate the layer.
-
Click the step of node in the child node has no
Hello
I customized a series of nodes personalized like "chassisRackVSphere-ui.
In the picture1 below, "10.240.198.192", "Shopping cart", "Châssis" all three are custom node. When I double click on the column in the table, it must enter the purpose of the grid and remain in the child node as photo 2.
But it will show the Note2 for a second, then jump to the pic1. This jump is abnormal. An idea for this problem?
Set a breakpoint in your data adapter to see what happens when you select the custom in the 1st case object. The error of the user interface must be the result of bad data.
-
error after you run root.sh on the second node
Hello
I installed the clusterware on a system with 2 nodes running on RHEL 5
I followed the prereqs and fix all the errors I've met
After the installation of clusterware, he asked me to run root.sh on all nodes
When I run root.sh on the second node
It gave this error
Vipca (silent) to configure applications running
/ Home/Oracle/CRS/Oracle/product/10/CRS/JDK/JRE / / bin/java: error loading
shared libraries: libpthread.so.0: cannot open shared object file:
No such file or directory
so I followed metalink notes 414163.1
After that I called it a day
in the morning, will receive it started both nodes
and started on the second node vipca
It gave this error
Unable to communicate with the services of crs PRKH:1010
i ran ps - ef | grep crs
root 3201 1 0 15:37? 00:00:00 / bin/sh /etc/init.d/init.crsd run
crsctl check crs gave
demon of css contact failure 1
cannot communicate with the crs
cannot communicate with evm
What should I do to start these services?raw devices ownership is changed back to the root after reboot, which is why its usual practice to add chown/chmod to /etc/rc.local for example:
chown oracle: oinstall/dev/sde1
chown oracle: oinstall/dev/sdf1
chmod 600/dev/sde1
chmod 600/dev/sdf1 -
Have windows 7 and noticed on the desktop icons, below the left most of my icons are red circle or square with a white cross in it, what it means?
Hello
Could you provide a screenshot, desktop icons?
The circle has a strikebar through it?
What antivirus do you use?
(1) reboot and start typing the F8 key
Select Mode safe mode with networking
Download the following and run a full scan
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
This is to remove the malware invade the system. Reset when the scan is complete.
Run the System File Checker
Start > type CMD > right click on CMD > select Run As Administrator
Type sfc/scannow
Press enter
Use the System File Checker tool to repair missing or corrupted system files
https://support.Microsoft.com/en-us/KB/929833
This occurs when the .ico association is corrupt.
To resolve this issue, follow these steps:
- Click Start, click run, and thenType regsvr32 /i mshtml.dll
- Click OK or press the ENTER key.
- Click Start, click run, and then
-
Problem to extract Rad_error_nocontent and CellLAC in the "BOLD" device - 9000
Hello
I am facing problem to extract Rad_error_nocontent and LAC through the BB Bold 9000. any program work fine with BB curve.
Service Provider ATnT
When I run the application in the BB Bold, he always returns to LAKE and Rad_error_nocontent = 0, is there a setting to BB "BOLD" that have to configure to pick up the Rad_error_nocontent and the LAKE?
Paste the code for better understanding...
CellInfo.java
/***********************************************************************************************************************
class CellInfo extends form {}
private int Rad_error_nocontent;
private int cellLAC;
private motor eng;
CellInfo (engine eng) {}
This.ENG = eng;
LabelField title = new LabelField ("CellTower", LabelField.ELLIPSIS |) LabelField.USE_ALL_WIDTH);
setTitle (title);
HorizontalFieldManager hfm1 = new HorizontalFieldManager (Field.FIELD_HCENTER);
ButtonField photoButton = new ButtonField ("RAD_ERROR_NOCONTENT");
photoButton.setChangeListener (new Showid());
hfm1. Add (photoButton);
Add (hfm1);
}
private class Showid implements FieldChangeListener
{
/**
* Back to main camera screen.
*/
' Public Sub fieldChanged (field field, int context)
{
locateCellInfo();
eng.showDialog ("Rad_error_nocontent" + Rad_error_nocontent + "cellLAC:" + cellLAC);
}
}
public void locateCellInfo() {}
{Switch (RadioInfo.getNetworkType ())}
case RadioInfo.NETWORK_GPRS:
Rad_error_nocontent = GPRSInfo.getCellInfo () .getCellId (); /*************Returning 0**************************/
cellLAC = GPRSInfo.getCellInfo () .getLAC (); / * fetch 0 * /.
break;
case RadioInfo.NETWORK_CDMA:
Rad_error_nocontent = CDMAInfo.getCellInfo () .getBID ();
cellLAC = CDMAInfo.getCellInfo () .getNID ();
break;
by default:
Rad_error_nocontent = 0;
cellLAC = 0;
}
}
}This code works fine with BB curve but fails with BB Bold
Please help me to solve the problem...
The problem may be that your case statement does not take into account NETWORK_UMTS (3g) to move you to your default.
Maybe you are looking for
-
little thing up on "inbox" is going to just roundy round. does not, so cannot send
-
You can close the tab email in Thunderbird?
Is it possible to force close the primary e-mail in Thunderbird tab? I use thunderbird for the light module only and don't have no use of its obsolete e-mail options, so I would like to close this tab altogether.
-
Have used Firefox for many years on several computers. On the Home Office whenever you need to CAP a letter, notebook open instead. Every time! It is only on this one computer, none of the others. I completely uninstalled, cleaned and purged Firefox
-
Satellite Pro A300 - required DVD replacement
Hi, I am a beginner. Have two variants of the A300. A single DVD drive broken and has been deleted (not by me). Want to replace it, but another player does not fit so can not easy to find a replacement. Any ideas? Thank you.
-
Please help open file v5.0
I have a very old file using version 5.0, which I can not open with course labview 8.6 version. Any suggestions? Thank you