Masking of buttons during printing and setting of field to compensate for

Similar Questions

• HP Photo Smart 110 will print and copy but will not scan for Mac.

  Recently switched to Mac computer HP. My HP Photo Smart 110 will print and copy but will not scan for Mac. I need to download a program for my Mac for scanning?

  Thank you!

  OK, take a look at this document; http://support.HP.com/us-en/document/c03379337

  Scroll to the frequently asked questions and click on one of the way to analyze the options. It really depends on how you installed your printer, but you should be able to use the print window & scanning.

  Let me know if works

• When I try to import photos go into the import screen in lightroom, they will not import.  Import the button is dimmed and all the photos are checked for import, but they are a different color too

  Import the button is dimmed and all photos are checked for import, but they are a different color too.

  Hi kinziegirl,

  This happens if you try to import images are already imported.

  See a similar detailed thread Re: cannot import Images grayed out -

  Kind regards

  Assani

• I have a gen apple 1 dot matrix printer and I need a driver software for it

  I have a matrix printer of gen 1 Apple and I want it to work with my windows computer but I can't type good driver software.

  does anyone know of a good driver for the printer matrix apple for windows?

  What type of port is has a 'printer by points Gen 1 Apple?  If it has a serial port Apple, you may have a secondary problem is that it connects to a typical Windows PC?

• Press on print and the print option sometimes but the SAVE AS screen rises above him. Can not print

  I am trying to print a PDF file, but when I press print my screen will SAVE FILE AS. If I press save as and if I press on cancel printing option disappears. What have I changed? It worked yesterday.

  This can happen if the XPS Document Writer became sort of the default printer.

  Click on:

  Start-> Control Panel-> devices and printers

  then right-click on your regular printer and set it as default printer.

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Books of InDesign and set up for a single page and spreads

  Good afternoon everyone,

  I am currently working on an InDesign book that has about 40 documents + a table of contents.

  This document will be printed and perforated, so I incorporate the space required to do on my drawing by we also publish this doc as an electronic copy.  Is there a way I can my unique installation page and I then export document for printing with setting to rip the margins for the punching of holes?

  Thank you

  Ren

  Certainly more complex development for two-sided printing, but you might consider adding a slug or a further bleeding inside edge which could be included when exporting. If the pages are blank near the spine, purge would do with no specific provision (inside the purge is at the edge of the other page except if you divide the spread out). "" If you need to divide the pasta spread, you can use the script you will find at InDesignSecrets "Blog Archive" Pages Breaking Apart to bleed off the coast a thorn or http://www.printisrael.com/indesign/scripts/freeware/SeparatePages.jsx

• Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

  After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

  Hi @Doug18,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

  In the meantime, try the steps in these guides:

  • Printer is offline (Windows)
  • Print jobs stuck in the print queue (Windows)

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• CMYK mode to PRINT and use the Web colors?

  I'm sorry for my for my bad English but I'm French.

  Is this "good" (interesting?)  using colors of paintings in a CMYK with Illustrator document?

  I like the color of my photos and I want to use them for PRINT and the WEB too.

  For now, my photos are in black and white (the contours) in CMYK (for printing mode) mode. What do you think I have

  Duty?

  Thank you very much for your help!

  Hello-Hello

  BB,

  In CMYK color Mode, all colors will be within the CMYK range, regardless of how you create them.

  Normally, when the work is used for both print and web / whether, it is created in the CMYK and then converted for the web / whatever the use.

  You can get a first glimpse of the question of the range here:

  http://en.Wikipedia.org/wiki/gamut

  http://en.Wikipedia.org/wiki/Color_space

  In general, the CMYK colors are limited/more duller; You can add a spot color or use special printing, such as 6/8 color.

• B & w datatype Differnce report in a procedure and set in the array.

  B & w datatype Differnce report in a procedure and set in the array.
  
  For example:
  
  creating the table:
  create table emp (emp_name varchar2 (100));
  
  each procedure
  
  Create procedure emp_call
  is
  emp_value varchar2 (100);
  BEGIN
  ---
  --
  END;
  
  What is the difference b/w emp_name and emp_value?
  
  one can tell me the difference?

  emp_name is the name of the column of emp table.

  emp_value is a variable in the pl/sql block.

• Epson print driver changes both margins to address for the envelope printing. Three other printers print the addresses of envelope with correct margins.

  I bought a new all-in-one Epson Wireless WF-3540.  So new Epson technical support people had one to test my problem.  I like it a lot because it has two trays cassette for 250 pages each, and a page break back.  For the love of the work I do in this description I use the back form feed on the Epson only.

  Suppose I have a business letter in Word 2007 using Windows XP Pro.  My default printer is a HP 932 C.  I click on Mailings, Create, envelope and print it.  The result is the number 10 envelope with the address of the left retour.3,.3 of the top and the address of destination 2 inches high and 5 inches from the left.  Exactly the way I want it.  A selection button.

  Suppose I have install the new Epson WF-3540.  I opened the business SAME letter in the same Word 2007 using Windows XP Pro.  This time around with the Epson WF-3540, I followed the same procedure for click mail merge, Create, envelope and print.  The result is an envelope of number 10 with the return address 1.5 inches from left to right top et.4.  The destination address is 3 inches from the left and the top 2.25.  The non-professional delivery address looks and interferes with the USPS standards.

  I worked on the problem for two days.  I was on the phone with Epson for a total of four hours.  Here are the various attempts to set this right using the Epson WF-3540.

  1. in the Ribbon to create open envelopes, click options, and set the margins for the return and destination addresses as I would like.  I always use the et.3 valeur.3 return address and the destination address in 5 and 2.  I put these values in the options, click OK.  Print the envelope, and it is printed as I've described above with Epson.  In looking at the options for envelopes that they were changed to Auto.

  2. I have a test with the help of the same letter of businesss, Word 2007 and Windows XP.  I set the default printer to the HP.  This time I select envelope, add to the document.  I see an image of the envelope, watching leaders aside, it looks I want.  I close Word 2007, without saving the changes.  I have change the default printer to the Epson, open Word, the same letter from the company and select the envelope in the document.  It seems to appear in the same strange settings how it prints.

  3. I tried to change the margins of the envelope in the document with Epson as default.  When I try to print it throws an error telling me that I am trying to print outside margins.

  What are the effects of the behavior of the default printer?  Why the change in the appearance of the envelope both printed and in the document when I change printers.  What does the print driver? has to do with the formatting?  The installation of the Epson gives something in the registry that control margins almost anything.

  Epson told me there is no problem, but they are ready to buy the printer back to me.  Remember that they don't even have one to test on.

  I tried adding some dummy printers, without the actual printer and using the drivers only.  For example, I added an Epson ActionLaser 1100.  When I set it by default and use the same letter sales and Word 2007, I click on the envelope and add it to the Document, the addresses on the envelopes are exactly where I wait until they are, using the ruler on the side.

  What is - this subject a new printer is to control this mess?  I'd love to keep him.  I do a lot of letters and need the rear feed and must be able to one click printing envelopes.

  I had the same problem with my Epson WF-3540. Came to this site looking for the answer after the Epson site doesn't seem to have an answer. After reading the posts, I went to the printer, and I gave it a try more. I found what seems to be a solution but not transparent, that it worked.

  I noticed that when I tried to print the envelope property printer box shows the paper letter size (8 1/2 x 11) and not an envelope (#10). I changed the setting as the skin #10 and checked manually minimize margins. I then used the button Add presets save this as # 10 envelope as a new preset. This allows to print the envelope in the current printing of the page with the ability to use almost the entire surface of the envelope. You then switch to printing standard predefined when you are finished.

• P1102w offline and can't find the html for OS x 10.9 configuration utility

  I installed the 1102 on my network, it was printing fine... it off for a few days. Now when I turn it on, the light blinks blue network, when I try and print it says 'the printer is not connected. If I look in system preferences, the printer shows a green light next to it.

  But I have no idea how to get to the online tool that allowed me to configure network settings and see if they have changed. There is no option on any screen taking me there. When I click on "Options and supplies" there is no button to take me to the HP configuration page, and I don't see any software on my computer to allow me to set it up.

  I just put a WPA password on the network, and I know what the question perhaps, but I still don't see how to get to the place where I set up the printer (was it a URL.. .but where he is hiding?)

  Hi @laurad1 ,

  By your post, I see that you cannot set up the printer again on the 10.9. I can help you today.

  Since you have changed the WPA password on the network, you will need to restore the default settings of the printer and set it up again on the network.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer wireless.

  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.

  Print a Configuration Page.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  If you need help, let me know.

  Good day!
  Thank you.

• Help trying to set up the ADF security for an application

  Hello
  
  I create in my application a masterTemplate.jsf page, then a page home.jsf which has the page masterTemplate.jsf as its model.
  I activated the ADF security in my application and set the permission of "view" for the anonymous role homePageDef.
  When I run the app on JDeveloper integrated server with debugging options, this is what I get in the console:
  
  [JpsAuth] Check permissions
  PolicyContext: [related]
  Goal/resources: [view.pageDefs.homePageDef]
  Action: [see]
  Permissions class: [oracle.adf.share.security.authorization.RegionPermission]
  Result: [FAILURE]
  Reviewer: [VAC]
  ProtectionDomain:ClassLoader=sun.misc.Launcher$AppClassLoader@68ffab0a failed
  CodeSource=file:/C:/oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adf-share-support.jar
  School principals total = 2 principals)
  1 JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousUserImpl 'anonymous' GUID = null DN = null
  (2. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl 'anonymous-role' GUID = null DN = null)
  Permissions =)
  ("java.io.FilePermission" '\C:\oracle\Middleware\oracle_common\modules\oracle.adf.share_11.1.1\adf-share-support.jar', 'read')
  ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context = SYSTEM, mapName = *, keyName = * ' ' * ')
  ("java.util.PropertyPermission" "line.separator" 'read')
  ("java.util.PropertyPermission" 'java.vm.specification.version', 'read')
  ("java.util.PropertyPermission" 'java.vm.version', 'read')
  ("java.util.PropertyPermission" 'java.vendor.url', 'read')
  ("java.util.PropertyPermission" 'java.vm.specification.vendor', 'read')
  ("java.util.PropertyPermission" "java.vm.name", "read")
  ("java.util.PropertyPermission" "os.name" 'read')
  ("java.util.PropertyPermission" 'java.vm.vendor', 'read')
  ("java.util.PropertyPermission" 'path.separator' 'read')
  ("java.util.PropertyPermission" 'os.version' 'read')
  ("java.util.PropertyPermission" 'java.specification.name', 'read')
  ("java.util.PropertyPermission" 'mds.store.filesystem.path', 'read')
  ("java.util.PropertyPermission" 'os.arch' 'read')
  ("java.util.PropertyPermission" "java.version", "read")
  ("java.util.PropertyPermission" 'java.class.version', 'read')
  ("java.util.PropertyPermission" "java.vendor" 'read')
  ("java.util.PropertyPermission" 'file.separator' 'read')
  ("java.util.PropertyPermission" 'java.vm.specification.name', 'read')
  ("java.util.PropertyPermission" 'java.specification.version', 'read')
  ("java.util.PropertyPermission" 'java.specification.vendor', 'read')
  ("java.lang.RuntimePermission" "stopThread")
  ("java.lang.RuntimePermission" "exitVM")
  ("java.net.SocketPermission' 'localhost:1024' - 'Listen, resolve')
  (oracle.security.jps.service.policystore.PolicyStoreAccessPermission name of the context: APPLICATION: * Actions: getApplicationPolicy)
  )
  Call stack: java.security.AccessControlException: access denied oracle.adf.share.security.authorization.RegionPermission/view.pageDefs.homePageDef/view
  
  If the page has no definition of the pages behind, the application starts correctly because it does not need to check security for this page. The minute I create a page for the home page definition and set the permission for anonymous role, the failure message above rises.
  Can you please help me solve this problem? Is this something that is not in the configuration steps?
  
  Thank you
  Mircea

  Hello

  If the model also has a file PageDef, this file need to go to grantedb as well

  Frank

• button conrol min and max range option during execution

  Is it possible to change the window button conrol min and max Beach setting during execution?

  Thank you very much Nick.

• Photosmart HP 6520: printer is set for photos and cannot print from Web sites

  My printer setting have been changed and now I can't print anything a website (as a receipt, return labels etc.) because the printer thinks it is photo printing. I see what I want to print in the preview before printing, but when I push PRINT a box appears that says:

  LIBRARY name XPS save as XPS Document type and I get two choices to click on... Save or cancel.

  I can print whatever it is normally my WORD program. I can't find information on the parameters in the booklet that came with the printer and I can't figure out how to change the setting back.

  Thanks for your help.

  Baris

  Welcome to the Community Forum of HP.

  Reference - you need to have first installed the software of complete functionality on your computer for the printer:

  General instructions to install the software of the printer 6520

  =====================================================

  I checked both browsers: Firefox and Internet Explorer 11.

  The following can help:

  Firefox

  Click file > print >

  Examine the drop-down list, you should see the options (list), the choice to select your printer - make sure that you do not select the 'fax' >

  Ok

  -------------------------------------------------------------

  Internet Explorer

  Click file > print

  Under Select printer >

  The options appear one after the other, XPS Document writer is one of them, your printer must be another > select your printer, and then click print

  -------------------------------------------------------------

  If you accidentally "disconnected" position your printer as the default printer, the following should help bring back:

  Control Panel > display icon > devices and printers > one click with the right button on your printer >

  Select Set as default printer

  -------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!