Masking of the glitch - smart RADIUS

Similar Questions

• Issue of smart RADIUS

  The user manual is pretty clear about the objective of the smart RADIUS.  However, I have a basic question.  Can I check out RADIUS smart before or after I have selected an object.  If I do it all first, it disappears when I make my selection.  If I make my selection first, it changes radically in the selection.  What I'm doing wrong or don't understand?

  My personal opinion, this thing is worthless... You must only when necessary (again, my opinion only is never...) so after you make your selection, you can dial in the smart RADIUS.

• Photoshop CC 2015.5.0 Smart Radius Undo BUG?

  When I use the brush to cancel the action of smart RADIUS, it not back how it was before in a perfect way, it comes with imperfection/distortion on it. 2015.V16.0, it works as should be in Photoshop CC.

  NOTE: RADIUS INTELLIGENT is not verified, but the same result as if it's true or not, las it retains a small amount of RADIUS on 2015.5 After erasing it.

  Watch the short video (in HD), to understand what I mean:

  Hello, Emilio.

  Please send your comments here, so that our staff and our engineers can look at him.

  http://feedback.Photoshop.com/photoshop_family

  http://feedback.Photoshop.com/photoshop_family

  Your community will also be able to discuss the issue and vote on it. Thank you for helping us improve Photoshop!

  Thank you

  Florian

• How to disable the "Insert smart card" dialog box keeps appearing after the connection?

  Running Windows 7 64 bit on a laptop Dell which includes and integrated smart card reader. My configuration does not require a smart card to log on. I was wondering if the smart card reader has worked, I plugged a card chip used on another system. The driver is installed automatically, so it appears the drive works.

  Now, whenever I log in, the "Insert smart card" dialog box is displayed. If I cancel or close the box, he continues to reappear every few seconds. How to disable this behavior?

  Update: this is somehow connected to Outlook 2003. I have 4 different e-mail accounts. The "Insert smart card" box appears only when checking for my att account (yahoo), which is configured by using POP3.

  Go to the Services.msc and check the settings for the smartcard (manual test) service.

  Tom

  PS 29 December 2011

  The position of the OP, have been reported since a lot of this problem on the some notebooks Dell and HP. There are a few reports that a replacement of the motherboard fixed the problem and the other that the relocation of a certain connector (no mention of exaclly one that) solves the problem. Direct contact with the manufacturer of the laptop computer, Dell or HP wether, might be useful. Try a follow-up if you have already made contact.

  Tom

• Problems of blackBerry Smartphones initialization of a 330 of SafeNet via the BlackBerry Smart Card Reader

  Hello

  I managed to use my PC BlackBerry smart card reader. Now, I am trying to initialize a smart card SafeNet 330 with SafeNet BSEC from the PC tool. But everything I do the initialization fails.

  Has anyone been initialized properly a card in this way by the BlackBerry smart card reader?

  I suspect a problem with the drive, why I'll try to find my Gemplus400 player and see if it works.

  Thank you

  Chris

  Using the player of Gemplus400 did the trick. Looks like the BlackBerry SCR reader stumbles on the configuration of the password during initialization of the as it does not define the label successfully.

• Windows 7 in a VM can use the Intel Smart Response Technology?

  I want to run Win 7 in a VM under Xen. Is it possible to make use of the Intel Smart Response Technology with Win 7 in a VM?

  Hello Ivan,.

  Welcome to the Microsoft Community Forum.

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Mask and the magic wand in the Select

  In Using Photoshop / select and mask Workspace for 2015.5 CC, it is said after the launch of Select and mask workspace allowing, "a selection tool such as the Lasso, magic wand, or quick selection. Now click on select and mask in the Options bar. "But when I run S & M, the magic wand is not available. Is it possible to add it?

  Martin

  If you mean the magic wand tool, no. There is only the regular lasso tool and the quick selection in the selection and the mask tool.

• Select and artifacts of mask using the new refine edge

  Hi all

  is - that someone else has had this problem since the last update version 2015.5.0 Photoshop?

  I find strange artifacts when using select and mask and the new brush refine edge that would not happen in the old refine edge.

  The Alpha channel looks good but the image shows of strange artifacts and blurry tasks and resembling traces of brush end hard.

  I took the time to correct my mask in order to remove any traces of brush hard edge, but they seams to still be there. I find it very frustrating.

  

  Hmmm... think I just found the answer to my question. I got the color box to decontaminate tiquetee.

  I have hidden without this box and the blur and artifacts disappeared. My recommendation for anyone making high range of editing and masking is to leave this box unchecked.

• How to fix the After Effects error - it was not possible to analyze the shape of the mask on the Clipboard

  How can I fix the following error: it was not possible to analyze the shape of the mask on the Clipboard. I have this note when I opened in After effects.

  Mac OS X El Capitan 10.11.4 the end of 2013

  After effects CC 2015.2 version 13.7.2.3

  Thank you.

  Looks like your mask has too many paths of access or summits. Try to turn on caps lock shift before you open the ASP (project file) or before you launch AE. If this does not clear your Cache and preferences. If this does not resolve the problem, we need workflow details that let you to this error.

• How can inversion mask, leaving the head of reading on screen - I fix it?

  I created a mask using the effect of the Ellipse on the first. I want to create a ticker of news but only in a certain area of the screen that I did. The red rectangle below shows where I want the ticker to be, the problem is that in the middle of the screen, there is a circle head. It appeared when I pressed "reverse" on the mask and not go away, unless I have remove the reversal. I don't want to do that because it is effect I want to achieve. (It remains on the video after export, I tested). So I was wondering what I can do to get rid of the circle without losing the news ticker in the banner on the left.

  

  Why not use the opacity mask?

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• I want to see the layer mask instead of the thumbnail of the layer mask in the layers palette.

  I don't see a thumbnail of the mask layer instead of the layer mask itself when I add a layer mask to the CS6.  How can I change this so the layer mask

  appear in the layers palette?

  Thank you

  Marc

  From what I remember of the CS6, it's the same CC follow these steps: in the layers palette, click on Panel options

  

  Click on the larger thumbnail

  

  The layer mask should now be big enough to see. Otherwise, you need to display it on the screen by alt clicking on

  on a PC option by clicking on the layer mask on a Mac

  

• collage of path of the mask in the wrong place

  I tried to make my object to track my trace mask, but when I copy the mask to the position of the object path is not sticking to the right place. I've purged and rebooted and it did not fix this problem.  Worked fine, then all of a sudden I started having these problems. See photos.  Photo a shows a letter T with a mask and and a form of Star, but as you can see its nowhere near the track.  Photo 2 shows the path where its stuck.     I don't understand what is happening here but its not supposed to happen like this. I have done several times before.

  I also tried with a solid.  I created a mask on the solid (see image 3) path then I cut the mask and stick it in the position of the solid and as you can see in picture 4 solid and mask are pasted so outside the model and the path is much more that I did.    Is this a bug or what?

  
  

  EDIT - I just tried this using a mapped auto mask and it works perfectly as it should.  His only happens when I do the mask with the pen tool?
  
  

  
  

  AE CC 2015

  MAC OSX - 10.9.5
  2.2 GHz intel Core i7

  16GB

  Graphics  AMD Radeon HD 6750 M 1024 MB
  
  Image 1
  

  
  

  
  

  Image 2
  
  

  Image 3

  

  
  

  Image 4
  
  

  You are not always follow the correct workflow. There is a tutorial that I knocked out the download on YouTube right now.

  Here are the steps:

  1. Create your text layer
  2. Position, rotate, scale your layer of text to fit your design
  3. Create the mask of the text by using the layer menu
  4. Select the path you want to use for the path
  5. Check the first Summit of this path and change it if necessary
  6. Select the position property you want to follow the path (including > transmitter > Position XY) and set a keyframe
  7. Dough
  8. The position property moves to the left. If you want to go the other way, use the keyframe assistant in time reverse the keyframes.

  That's all there is to it. Plan you, design, create your layer mask, set the first Summit, copy a keyframe mask, set a keyframe position and paste and you're done.

  Very soon, I will post a range of best products short tutorials on the basic workflow you must follow to use AE effectively and professionally.

• apply a clipping for each top-level group mask in the document

  Sample file: https://drive.google.com/file/d/0BzEoJSYDhH_WcXhIalFRTk9qOGc/view?usp=sharing

  We can assume:

  Art • grouped on configurations with a line called die.

  • All groups exist on "Layer 1"

  I am a loop in groups and work with groups who has relatives is "layer". I have to loop through all the groups in the document, but when I created the clipping mask creates a new group and live my loop. I am now a loop only in groups of "Layer 1"and moving them to a new layer before the clipping mask. My script is breaking after the Group has been moved to the new layer. I have a bunch of alerts in there for debugging.

  #target Illustrator
  
  
  var idocX = app.activeDocument;
  var li = idocX.layers;
  
  
  function meetTheParents(PageItem){
    if (PageItem.parent.typename = "Layer"){
    return "Layer";
    } else if (PageItem.parent.typename = "GroupItem"){
    return "Group";
    } 
  }
  
  function isLayerFree(layer){
    if (layer.locked == false && layer.visible == true){
    var gpa = layer.parent;
    isLayerFree(gpa);
    return true
    } else {
    return false
    }
  }
  
  
  var trLyr = li.add();
  trLyr.name = "TRASH";
  var l1 = li.getByName('Layer 1');
  for (j = l1.groupItems.length -1; j >= 0; j--) {
    app.executeMenuCommand ('deselectall');
    var iGroup = l1.groupItems[j];
    if (iGroup.hidden==false && iGroup.locked==false) {
    if (meetTheParents(iGroup) == "Layer"){
    if (isLayerFree(iGroup.parent)){
    iGroup.move(trLyr, ElementPlacement.PLACEATBEGINNING);
    // set die variable to die in current selection
    alert ("Group " + j + " moved to trash layer");
    alert ("trash layer path items length = " + trLyr.pathItems.length); // I'm getting '0' here even though I just moved items into it.
    var die = trLyr.pathItems.getByName('proofLine'); // script breaks here
    alert ("Die identified for this group");
  
    die.move(trLyr, ElementPlacement.PLACEATBEGINNING);
    for (a = 0; a < trLyr.pageItems.length; a++){
    var thing = trLyr.pageItems[a];
    if (thing.hidden==false && thing.locked==false){
    thing.selected = true;
    }
    }
    var sel = idocX.selection; // get selection
    alert (sel.length + " items in current selection.");
  
    // make clipped group of die with art inside
    if (sel.length==2) {// continue only if 2 objects are selected
    var igroup = idocX.groupItems.add(); // add a group that will be the clipping mask group
  
    var imask = sel[0]; // the mask is the object on top
    var ipath = sel[1]; // the "drawn object" is at the bottom
  
    var idup = imask.duplicate(); // duplicate the mask, to later get the fill and stroke to apply to the clipping path
  
    ipath.move (igroup, ElementPlacement.PLACEATBEGINNING); // add both path to the group
    imask.move (igroup, ElementPlacement.PLACEATBEGINNING);
  
    imask.clipping = true; // make the mask the clipping path
    igroup.clipped = true; // clip the everything in the group to the clipping mask
  
    if (idup.filled == true){
    imask.fillColor = idup.fillColor; // add fill color, same as the dup
    }
    imask.stroked = true; // stroke the mask
    imask.strokeWidth = idup.strokeWidth; // add stroke width, same as the dup
    imask.strokeColor = idup.strokeColor; // add stroke color, seme as the dup
  
    idup.remove(); // remove the duplicate
    }else { // show this message if other than 2 objects are selected
    alert("Select both, the Mask and the object that needs to be 'inside'.\rThe Mask needs to be the top most object.");
    }
    app.executeMenuCommand ('deselectall');
    igroup.move (l1, ElementPlacement.PLACEATBEGINNING);
    }
    }
    }
  }
  trLyr.remove();
  

  Inside of my plu script that it breaks in silence, in this example script is for me a 'no such item. There should be such an element, I just put there. Once the script completes, the Group has been moved, which means that the named path is right where it should be.

  Let's see if this works:

  #target illustrator
  function test(){
      if(app.documents.length < 1){
          return;
      }
      var doc = app.activeDocument;
      var lr = doc.layers[0];
      for(var i=0; i		   

• Photoshop CC2014: where is the toolbar, which shows the box color, RADIUS box, among other things?

  I take a class of Photoshop using Photoshop CC2014.  I can't find the toolbar that displays the box color, RADIUS, among other things.  Can someone tell me how to find them?

  All your panels are found under your menu of the window at the top of your screen. Looks like you are looking for the properties panel for the forms? Click on a layer and shape your shape tool, and you should see it. Everything is context - sensitive which means your options at the top of the screen bar will show you the options for only the currently selected tool.