Windows 7 in a VM can use the Intel Smart Response Technology?

Similar Questions

• XPS 8700 - Windows 8 w / Intel Smart Response Technology re - install

  Hello community,

  My hard drive in my XPS 8700 failed recently. I got a replacement and have installed the new drive in the chassis. It's the only drive (2 TB), but I also (30 GB) SSDS for Intel Smart Response Technology.

  I have a problem with the OS / Intel Smart Response technology Setup. I'm trying to (re) install Windows 8 of the disc. When I run the installation of the OS, just after choosing language preferences a screen will appear indicating that a media driver is missing.
  "Load driver".
  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or a USB flash drive with the driver on this subject, please insert it now.
  Note: If the installation media for Windows is in the DVD or on a USB drive, you can remove it safely for this step. »
  I guess it's regarding the pilot of SORTS. I tried to put the pilot SORTS on a USB but it is not detected when browsing.
  "Load driver".
  No pilot of the plane have been found. Make sure that the installation media contains drivers and then click OK. »
  I need help ensuring the RAID and BIOS are correct before installing Windows 8 with TRIE. Currently, neither the SSD or HARD disk created a RAID Volume (note No changes have been made in the BIOS, but the existing RAID configuration has been removed from the SSD).
  Emergency assistance would be greatly appreciated.
  Dell XPS 8700
  Windows 8, 64-bit, English
  2 TB hard drive 7200 RPM SATA + Intel SRT (30 GB Lite-On SSD MSATA)
  24GB Dual Channel DDR3 1600 MHz - 4 DIMMs

  In collaboration with a Dell technician by CAT, we have identified the problem with the driver files SORTED on the USB. I tried to download from the driver and Utilities disc that came with the computer, however the correct files are not extracted from the USB.

  The tech located the driver appropriate and after extract the USB driver has been detected.

• Problem starting Windows 8 (associated with quick start + Intel Smart Response Technology SSD cache)

  Hello
  I have a problem with the fast start-up of Windows 8. When I shut down my PC everything works fine, but when I turn on the PC, Windows will load until a certain point and then suddenly start screen appears again. The second departure is always successful.

  I discovered, when I turn off the Quick start, the computer starts without error on the first attempt. It goes the same for when I disable Intel Smart Response Technology (SSD cache). There are no problems when I use Hibernate mode.

  Recently I did a BIOS update, so I don't know if there is a setting in the BIOS that is may cause this error?

  Thanks in advance for any help!
  Martin

  Hi Martin,

  Glad to know you solved the problem. Thanks for sharing of the resolution, because it would help the other members of the community to the same question.

  Please do not hesitate to answer, in case if you need help or information on this issue.

• If I replace my motherboard I have to buy Windows again or if I can use the same key?

  A motherboard / licensed

  The motherboard in my computer is dead (well not exactly, the USB ports short anything plugged). I RAM would be the Council because it is still under warranty, but the manufacturer says that the problems are not covered by the warranty. I'm in a situation where I need to replace my motherboard. I also found that my motherboard is no longer manufactured. I'll be able to buy a new motherboard and reinstall Windows? I was told that since a computer cannot exist without a motherboard I'll have to buy another copy of Windows: new motherboard = new computer = new copy of Windows. But I was also told that if I have a retail copy, what I do, and not an OEM, I was able to reinstall my copy if I replace my motherboard. How true this is?

  All this is true!

  If you have a retail version, you can change the card mother as many times as you like as long as your license is used only on any given computer one at a time.

  After the fifth installation of your license, phone activation may be required.

  Only OEM versions are related to the first motherboard forever, unless the manufacturer can sell you a model which replaced the abandoned.

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• You can use the ZyXEL NBG-419N router in windows xp

  You can use the ZyXEL NBG-419N router in windows xp

  Hello

  The real question is to know if your wireless device is compatible which should be it that this router has also B and G
  capabilities. Check the Support and the Documentation of ZyXEL. If you think there may be problems (would be unusual)
  Check with the manufacturer of your device WiFi support and documentation.

  ZyXEL NBG-419N
  http://us.ZyXEL.com/products/details.aspx?PC1IndexFlag=20040520161256&CategoryGroupNo=2F39BF6F-E115-4047-A6C9-36833483A7CA

  One of the first things I do with a router is updates of the firmware.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I change my birth date in Windows Live Hotmail profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?

  How do I change my date of birth in the profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://windowslivehelp.com/product.aspx?ProductID=1

• I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS?

  I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's

  an old computer, but it works very well.  I want to switch to XP using the Windows upgrade disc. But

  in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade.  Thanks John

  Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.

  In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.

  http://support.Microsoft.com/kb/978307

• Windows Search 4 the program active with a log on before you can use the start menu. It is sometimes impossible to open an Office application.

  Original title: search Windows 4

  With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.

  Hi Ken_978,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         The question is only limited to Office applications?

  ·         What exactly happens when you try to open an Office application? You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.

  Follow the steps below to uninstall:

  a. click on Start

  b. click Control Panel

  c. select Add / Remove Program

  d. place a check on "Show updates"

  e. you will see Windows Desktop Search 4.0 and uninstall it.

  Reinstall back, you can see the link below:

  http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx

  Hope this information helps.

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• When I put the time, she can use the internet, she changes the time on the computer and returns on the internet. What can I do?

  When I put the time, she can use the internet, she changes the time on the computer and returns on the internet.  What can I do?

  Not enough information.  You have provided no context.  You don't say what version of Windows you are using and you don't really describe the situation in many details.  Reading between the lines, it looks like you have a child who has time on the Internet you want to limit.  You do not tell us what tools you use to control this limit online, so it is difficult to recommend the right forum for your post.  Please update your message with a more detailed description of what is happening and what you want to do.

  One thing that comes to mind is using Live Parental control with a Netgear router.  See http://www.netgear.com/lpc.  LPC uses the service OpenDNS (http://www.opendns.com/)

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• Vista 32 bit does not display the Epson NX230, but I can use the scanner of this part.

  I just bought an Epson NX230 because my ip2600 canon is not print anything.  When I load & install Epson the O. S says it is not found.  It's an all in one and I can use the scanner.  I tried to uninstall the old driver but the comp is suspended.

  Any ideas?

  Hello

  1. How do you try to install the drivers?

  2. What is the message exact error do you get when you install the drivers?

  I suggest to follow the steps provided and check if this can help,

  Method 1:

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: If the problem persists then uninstall and reinstall printer driver software in your computer from devices and printers and programs and features.

  Step 1: To uninstall the driver scanner devices and printers:

  a. click the Start button, select Control Panel and click on devices and printers. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. right-click on the printer driver, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  Step 2: To uninstall programs and features, follow the steps in the link below:

   Uninstall or change a program

  Note: Restart your computer. Then, install the latest drivers for the printer.

  More information: Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Install Windows 8 on a new computer using the same product key

  Currently I use an HP laptop and I activated my WINDOWS 8, but now I want to buy a new ASUS laptop and I want to know if I can use the same key or not. Windows 8 I bought is a retail edition.

  Original title: WINDOWS 8 KEY

  You will need to purchase another license. 1 computer, 1 license.

  http://www.Windows.com/buy

  If your purchase of a new computer, it will already have Windows 8 preloaded, so you have to purchase another license.