Mass case Tester: reference to aid data

Similar Questions

• Feature not supported in mass cases Tester

  Hello
  
  I get an error of not taken function supported in mass cases Tester when I try to use the data in reference to boot my modules.
  
  Please let me know what could be the possible cause of this error. Is the use of reference data not supported in the current version of MCT?
  
  The details of the error are:
  
  This is a feature not supported
  Exception: Exception
  Message: This is a feature not supported
  Source: Oracle.Policy.Modeling.MassCaseTester
  HelpLink:
  TargetSite: Boolean Check()
  Stack trace:
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)
  
  
  
  Thank you
  Aakarsh

  Unfortunately you are right - given reference are not supported in the current version of the MCT.

  It is expected that it be fixed for the 10.2 release.

• Error is mass case tester for a modules having relationships

  Hello
  
  I was testing a simple modules having a self referring to relationships and company.
  When I use the MCT on this one then I get the following error when I put the value of "The number of instances of the entity that will be created" more than 1:
  (The same error is also to come if relations are not free, that is by invoking between two entities)
  
  Object reference is not set to an instance of an object.
  Exceptions: NullReferenceException
  Message: The object Reference not set to an instance of an object.
  Source: Oracle.Policy.Modeling.MassCaseTester
  HelpLink:
  TargetSite: Oracle.Modeling.MassCaseTester.RulebasePath BuildSolution(Double, Boolean, Oracle.Determinations.Engine.EntityInstance)
  Stack trace:
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)
  
  
  Thank you
  Aakarsh

  The case of mass tester cannot process relationships that are not the containment relationships.

  This limitation will be better reported in point 10.2

• Exception mass case Tester

  When you use the tester in case of mass for reporting, I'm getting the following exception:
  
  * "Think cycle is not stabilized after 20 iterations. This is probably due to a flaw in the earpiece of the inference. » *
  
  It's coming when I'm generating the following:

  comprehensive sample
  Random sample
  The decision chart

  what could be the possible causes for this?
  
  
  Here is the full error message, and the stack trace:
  
  Exception: IllegalStateException
  Message: Think cycle is not stabilized after 20 iterations. This is probably due to a flaw in the earpiece of the inference.
  Source: Oracle.Determinations.Engine
  HelpLink:
  TargetSite: Sub Think()
  Stack trace:
  at Oracle.Determinations.Engine.Local.LocalSession.Think)
  at Oracle.Determinations.Engine.Local.LocalSessionSync.Think)
  at Oracle.Determinations.Engine.Local.LocalSession.RequireThink)
  Oracle.Determinations.Engine.Local.LocalRelationship.SetInternal (source, list target entity, instance list notTargets, Boolean uncertain)
  at Oracle.Determinations.Engine.Local.RelationshipRule.Think (LocalSession session, list instances)
  at Oracle.Determinations.Engine.Local.LocalSession.ThinkStep)
  at Oracle.Determinations.Engine.Local.LocalSession.Think)
  at Oracle.Determinations.Engine.Local.LocalSessionSync.Think)
  at Oracle.Determinations.Engine.Local.LocalSession.RequireThink)
  to Oracle.Determinations.Engine.Local.LocalSessionSync.CreateEntityInstance (entity)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.CreateInstances (ArrayList contextChildren, entity, Int32 instanceCount EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)

  The bug I mentioned in the stack trace turned out in fact to be the source of the problem. This is a bug in 10.1 when alleged relationships are used when the engine is using what is called "Immediate" mode of thinking, rather than the mode of thinking 'Deferred' usual that virtually all uses. In this case the MCT is one of the few tools we have that immediate uses think that mode.

  I have found a workaround, which ironically uses a listener of inference to solve the problem. I'll email to you that I can not set anything in the public discussion forum.

  The problem is already solved for our next release, so should not be a problem in the future.

  Published by: Stephen French on 2 Sep 2010 19:20

• Passwords in case TEST/DEV.

  Another quick (and fortunately we easy dradles)
  
  I work in an environment where there are about 50 cases (of flavours - 8.0.4 to 11.2.0.2).
  
  My question relates to the password that are specific application - custom schema passwords and passwords apps...
  
  Do you provide the passwords above your team of developers/EBS Production support in your case TEST/development? (does not reference to PROD here)
  
  If in all these cases, each has its own user account with all the privileges of the user APPS (select any etc...), what is the justification for a developer who need the APPS password?
  
  It is advisable to give the APPS password in TEST/development cases?
  
  Thank you

  Do you provide the passwords above your team of developers/EBS Production support in your case TEST/development? (does not reference to PROD here)

  We do this in all environments except TEST (which is used for QA and check the deployment scripts), UAT and PROD.

  If in all these cases, each has its own user account with all the privileges of the user APPS (select any etc...), what is the justification for a developer who need the APPS password?

  If you already have users of database created for the users with all the privileges and password apps should not be shared.

  It is advisable to give the APPS password in TEST/development cases?

  Please see my response above. In addition, please see:

  Re: How many lower levels of the Oracle Applications?
  Re: Developers access to the database of apps user (best practices)?

  Thank you
  Hussein

• Certification of storage VMware 'Test of integrity of data-> LUNReset '.

  Hello

  I installed VMware Workbench 3.5.5.3795915. Prepared the test bench (installed two esxi and vsphere (has and esxiB) and on each implemented 4 virtual machines (2 linux, 2 windows accordingly).)

  On the "CopyUserWorld" of testcase 2d program 'userworld' was copied from workbenh(/opt/vmware/VTAF/storage60-cert/VTAF/Test/Storage/StorageCert/CertTools/userworld/userworld) on each esxi.

  This program running on the 4th testcase 'Test of integrity of data-> LUNReset '.

  Results on executing command ' / sbin/userworld "is"Segmentation fault ". Newspapers below:

  -----------------------------------------------------------------------

  2016-06-15 20:47:49 UTC

  2016-06-15 20:47:49 UTC testname is LunReset

  2016-06-15 20:47:49 UTC WARNING: XML::LibXML compiled with libxml2 20708, but the runtime libxml2 is older 20706

  2016-06-15 20:47:50 UTC

  2016-06-15 20:47:51 UTC [CONFIGREAD] [0] INFO: JOURNAL of the value. MONOCHROME 1...

  2016-06-15 20:47:53 UTC [TRANSPORT] [0] INFO: host localhost works STAF version 3.4.14...

  2016-06-15 20:47:53 UTC [HAND] [0] INFO: launch the IP address of the host: 192.168.1.108

  2016-06-15 20:47:53 UTC [CONFIGREAD] [0] INFO: define the STAF. SERVICEHOST for localhost.

  2016-06-15 20:47:53 UTC [CONFIGREAD] [0] INFO: set STAX. Local SERVER...

  2016-06-15 20:47:53 UTC [JOURNAL] [0] INFO: prepare the log directory: /workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/logs/

  2016-06-15 20:47:53 UTC [JOURNAL] [0] INFO: prepare the log directory: /workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/zip/

  2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: loading opt/vmware/VTAF/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset.xml...

  2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: loading test module opt/vmware/VTAF/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/userworld_cmd.pm...

  2016-06-15 20:48:02 UTC [CONFIGREAD] [0] INFO: define the STAF. SERVICEHOST for localhost.

  2016-06-15 20:48:02 UTC [CONFIGREAD] [0] INFO: set STAX. Local SERVER

  2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: TEST defined in 'lun_reset' of the Launcher

  2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: Set UWLUNID to 'naa.60001ff090063000000000138bca0005' of the Launcher

  "2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: AUXHOST Set to ' 192.168.168.101 ' of the Launcher

  "2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: TESTHOST Set to ' 192.168.168.100 ' of the Launcher

  2016-06-15 20:48:02 UTC [TESTHASH] [0] INFO: process parameters and Tags

  2016-06-15 20:48:03 UTC [TESTHASH] [0] INFO: the constraints of treatment...

  2016-06-15 20:48:05 UTC [STAFSDK] [0] INFO: host service STAF on the branch of vsphere-2015-rel with the build number: 2243648...

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: 192.168.168.100 process validation constraint...

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: 192.168.168.101 process validation constraint

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: the program of treatment facility

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: no configuration specified.

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: update the node for TestHost

  2016-06-15 20:48:07 UTC [TESTHASH] [0] INFO: update the node for AuxHost...

  2016-06-15 20:48:08 UTC [USERWORLD_] [0] INFO: way of the world the user is: / sbin/userworld lun_reset naa.60001ff090063000000000138bca0005...

  2016-06-15 20:48:10 UTC [TRANSPORT] [0] INFO: 192.168.168.100 host is running version 3.4.1 STAF...

  2016-06-15 20:48:10 UTC [TESTBASE] [0] ERROR: Command::ExecuteCmdStdout: Return code for cmd "/ sbin/userworld lun_reset naa.60001ff090063000000000138bca0005 ' does not correspond to expected return (expected rc = 0 and real rc = 139) code.

  2016-06-15 20:48:10 UTC Stdout = "

  2016-06-15 20:48:10 UTC Stderr = "Segmentation fault

  2016-06-15 20:48:10 UTC '...

  2016-06-15 20:48:17 UTC [TESTBASE] [0] INFO: test result: FAIL...

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO:-summary of test -

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: LogDirectory: /workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/logs/

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: TestResult: FAILURE

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: ZipDirectory: /workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/zip/

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: StartTime: June 15, 2016 20:47:55

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: end time: June 15, 2016 20:48:17

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO: duration: 0 day (s) 0 hr 0 min (s) 22 (s) dry

  2016-06-15 20:48:17 UTC [UTILITY] [0] INFO:-...

  2016-06-15 20:48:17 UTC [RESULTHAND] [0] INFO: directory XML preparation: workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/xmls/... do

  2016-06-15 20:48:17 UTC [ RESULTHAND] [0] INFO: Saved XML file locates at /workspace4/TestSessions/teststor.d/LunReset/20160615204749/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset_Jun_15_2016_20.47.53_18558/xmls/LunReset_Jun_15_2016_20.48.17_18558.xml..

  2016-06-15 20:48:18 UTC [HAND] [0] INFO: end of the test run/opt/vmware/VTAF/storage60-cert/VTAF/Test/Storage/StorageCert/FVT/UserWorld/LunReset

  2016-06-15 20:48:23 UTC Test FAILED

  ---------------------------------------------------------------------

  Installed on ESXi:

  [root@ESXiA:~] vmware - vl

  VMware ESXi 6.0.0 build-3620759

  Updating VMware ESXi 6.0.0 2

  I tried to run/sbin/userworld with all the other parameters (LUN UUID) but his "segmentation fault" in any way

  Could you tell how to fix this?

  Post edited by: tramp tst

  Post edited by: tramp tst

  Hello!

  You used the 3.5.5.3795915 Workbench that is defined for vSphere 2016 beta!

  

  Use 3.5.3 Workbench for your esxi, VMware ESXi 6.0.0 Update 2 and everything should be ok

  I would pass this test with Workbench 3.5.3 and esxi 6.0 GA (VMware-VMvisor-Installer - 6.0.0 - 2494585.x86_64)

• Example of reference for PCIe Data Streaming double 6537 s disc

  Hello world

  I have successfully changed the example of reference for streaming ( http://zone.ni.com/devzone/cda/epd/p/id/5315 ) for the card PCIe-6537 UNIQUE and able to write to the clock speed of 20 M (at end of initial test) without any error.

  However, I don't know how to view the *.bin file to check whether I wrote the right data. I saw an example VI called 'read the binary '. However, it is said "File already open" and gives a GPIB controller error (very odd). Should I try using MatLab? I doubt that this will help because it seems that the file write VI does not close the file correctly.

  I have attached the updated UNIQUE PCIe-6537 source code and the file with this post error. There are file support as well for writing file window live

  I'm the kind of new acquisition continuously and at high speed. Please let me know if I'm missing something. Thanks in advance.

  See you soon,.

  YK

  I have a few links you can go to more resources continuous here and here.

  The original question, you have posted using binary VI reading won't be able to because of the memory.  You can read more small segments of the file and keep the file intact.  There are a number entry that indicates the number of data items are returned by the function.  If you want to save multiple files, you can use any looping function to make it work, just set the condition to find out how much time and when to stop.  I don't know of a quick example that does this.  You read again all the data, but given that the readings are in small pieces, it will help the issue given that the data are not need a large space contiguous memory to reside in during playback.

  Data compression would be more than a post processing step rather than a step continuously, and it can slow down your stream if you were writing at the same time after your reading.  In producer/consumer architecture, you could read in the data and compress it before the record in a file, which would not affect the performance of your reading, it forms the data and create a file that is smaller and takes less space in memory.

• Examples for the new reference value of data with LVOOP

  Hello

  I'm looking for examples on how to use the new function of data with the LV class reference to achieve access to the ByRef objects.

  I would be very grateful for some codes.

  Greetings

  Hello

  a reall call by reference is not possible in LabVIEW. A good method is to use a queue with the size of a single element - then you can always move the reference to the queue and to read and write the new items in there.

  Or you use a FGV to store your object, which would work as well.

  

  RMathews

• Send a table 1 d of test for MSSQL 2012 data

  Hello. Feel free to answer a number any of the sub questions you can. Thanks in advance!

  (1) being new to MSSQL, I don't know how to send a simple 1 d table of a floating number of type to a table in Microsoft SQL 2012. This is as far as I'm away. I get the message on the left with the VI current and one on the right when I get rid of the concatenation of strings of time and just carry the numbers going to the table name instead.

  2 (a), this is my Guinea pig file, running on a database of Guinea pig. Finally I want to send the data from a test procedure that records a piece of data per millisecond - a table usually end up with approximately 15 000 items, more or less - on the basis of data. Unfortunately, I know the misfortune that Labview can send only on one line at a time. So how the hell do I do a new column for each new piece of data for a test that will run for an indefinite period?

  2 (b) ideally, I would have a table with a column for each test was run, with the title of each column is the time and date at which the test was run. Is there a way to "transpose" the data once it's in MSSQL?

  

  I used the fixed data because it's a better illustation of how things work.

  If you need to write two items on one line at a time, then you need to group them together.  The error you are getting is because you have wired a double as input but listed two columns.  Notice that my last example wrote a cluster (which can be created with a fiber node) of two elements.  You must use together to create a cluster and time data, then thread this cluster node of your insert.

  A few other comments:

  Generally screws express is a reasonable place to start when you're new to LabVIEW, but you must learn to use shift registers do calendar between the execution of the loop.

  When it is to group the data and time together you need not to turn all this into a table first.  Just put the time in a single entry and your data in the other.  The groups you create are a single line of data.

• Circular reference to application Data

  In some sort the JUNCTION "Application Data" has been reproduced in \username\AppData\local\, so now this machine has a circular reference. How can I remove it?

  It is supposed to be there.

  It is in all of my five systems.

  What problems are you having?

• Set a style different cases for the same placeholder (data fusion) used two times in the same text

  Hello.

  I have a document with some parties updated with the fusion of data (via placeholders). Is it possible to set a style of different cases for the same placeholder in the same text. See the example:

  Mike runs its < < vehicule_placeholder > > in the city. But its < < VEHICULE_PLACEHOLDER > > is meant to be shared.

  If the value of this placeholder in the file merger is 'bike', the sentence should be:

  Mike runs his bike in the city. But his BIKE is meant to be shared.

  Is this possible? How?

  Thank you.

  You can do it. A character style for this configuration placeholder text, set in all caps.

• Case statement with a select &amp; date in

  Hello everyone,

  This is my first discussion, so please bare with me.

  I am trying to write a case statement with a select statement that compares the dates.

  When I write an instruction box with a select statement in it compares everything but dates it works fine.  Once the date is there, he collapses.

  Here is a super simple example of what I'm trying to do, "b.in_serv_dt" is a date

  Select unit_no,

  case when ((sélectionnez b.in_serv_dt de b unit_dept_comp_main où a.unit_id = b.unit_id et b.in_serv_dt) > = 1 January 2012 "") then "everybody wins."

  When ((sélectionnez b.in_serv_dt dans l'unit_dept_comp_main b où a.unit_id = b.unit_id et b.in_serv_dt) < = 1 January 2012 "") then "Nobody wins".

  end

  of ottawa_unitmain_v one

  Any help would be greatly appreciated

  Thank you very much

  Hello

  your statement of formatting:

  Select unit_no
  case when ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  and b.in_serv_dt
  ") > = JANUARY 1, 2012"
  ) and then "everybody wins."
  When ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  and b.in_serv_dt
  )<=>
  ) and then "no winner".
  end
  of ottawa_unitmain_v one

  I see "partial conditions": <... and="" b.in_serv_dt="">> that have no meaning.
  I guess it's a kind of "typo" and I ignore them.
  If the statement is:
  Select unit_no
  case when ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  ") > = JANUARY 1, 2012"
  ) and then "everybody wins."
  When ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  )<=>
  ) and then "no winner".
  end
  of ottawa_unitmain_v one

  I guess that the "b select" retrieve one line, through the design of database (forced...)

  As already written: be careful with data types: avoid "implicit conversions" (when you compare different data types, Oracle has convert the data type of the other side, a side example: "mystring = mynumber" is transformed into 'TO_NUMBER (mystring) = mynumber', or 'mydate = mystring' translates mydate = TO_DATE (mystring, ) ")
  Even better: use explicit conversions, use explicit formats when necessary.
  Best: use no conversion on columns from the constants, but use the correct data type for the constant.

  With this in mind:
  Select unit_no
  case when ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  ) > DATE = ' 2012-01-01'
  ) and then "everybody wins."
  When ((select b.in_serv_dt
  of unit_dept_comp_main b
  where a.unit_id = b.unit_id
  )<= date="">
  ) and then "no winner".
  end
  of ottawa_unitmain_v one
  But note that b.in_serv_dt EQUAL to 1 January 2012 (at 00:00:00) is OK for both WHEN the conditions; then the a "win."

  Now: the subselect statement is identical in the 2 options of the case... You could work differently: (I add the "ELSE" in case one line as NULL in_serv_dt;) I guess that an INNER JOIN is OK, maybe you need a LEFT OUTER JOIN (if some lines of A have no corresponding row in B)

  SELECT a.unit_no
  , CASE WHEN b.in_serv_dt > = DATE '' 2012-01-01
  THEN "everyone wins"
  WHEN b.in_serv_dt< date="">
  While "Nobody wins".
  ELSE ' who knows... ". »
  END who_wins
  Of ottawa_unitmain_v one
  INNER JOIN unit_dept_comp_main b
  ON a.unit_id = b.unit_id
  ;

  Best regards

  Bruno Vroman

• Test 12 c WLS data source...

  I have properly configured the Datasources and focused it on the server. The servers are running, connection pool is very good, target data sources are fine. Yet, I don't see the list of servers in the source of data-> monitor-> test view.

  In addition,

  Service = server.getJDBCServiceRuntime)

  DataSources = service.getJDBCDataSourceRuntimeMBeans () returns an empty list for the server as well... (there are several sources of individual data - in other words, no multi or Hellnation)

  What Miss me?

  Thank you

  Well, he works today. A colleague told me that he could do with a change to the URL jdbc that had to be made. But we are not 100% sure if it was restarting or both... The problem is resolved. Thank you.

• Cases of failure to load data files should ROLLBACK and error only records...

  Hi all
  
  In my loading of data from source to the target process, for example iam loading 100 records in this 50th record with error, once recording error occurred the total loading process take to fail, recordings must restore and record error need to move the table of errors... one can guide you on this process...
  
  Thanks in advance...

  30021986 wrote:
  Hi all

  In my loading of data from source to the target process, for example iam loading 100 records in this 50th record with error, once recording error occurred the total loading process take to fail, recordings must restore and record error need to move the table of errors... one can guide you on this process...

  Thanks in advance...

  Hello

  Test this...

  Control flow set to YES
  Set the maximum number of errors allowed on 0 (zero)
  Run the interface

• using case, but by changing the data type of diff

  Hi guys, I am creating a view and selecting in a column that has a value of-1, 0 or 1, it's very good and I was about to use a case statement to convert the - 1 to "n", but obviously I can't do what data types do not match, I can't change the data type of the original column until someone knows how I could achieve This or a similar output, for example, is there a way to add an extra column to the view and just copy the numbers to the horizontal except for when it is - 1, we will copy a "n" throughout. the new column might be char and we could convert the numbers to a char when their through copying. Is it possible to do and if so could someone explain or give me an example of how to do it.
  
  Thank you.

  An alternative to the above:

  case when col1 = -1 then 'N'
       else to_char(col1)
  end