Passwords in case TEST/DEV.

Similar Questions

• Databases prod, Test, Dev

  Hi gurus,
  
  In a server how do we find Production, test and development databases. is there any command.
  
  Please tell me.
  
  Thank you!

  In a server how do we find Production, test and development databases. is there any command.

  No, you need to know or need to know is TEST/DEV/PROD.

  In most cases if the database is in Archivelog mode, then you can assume it as production.
  Check if all RMAN tasks configured, it could PROD. Same job RMAN will be scheduled on DEV/TEST according to criticality.

  Best answer, you can get the team. No ORACLE.

• Feature not supported in mass cases Tester

  Hello
  
  I get an error of not taken function supported in mass cases Tester when I try to use the data in reference to boot my modules.
  
  Please let me know what could be the possible cause of this error. Is the use of reference data not supported in the current version of MCT?
  
  The details of the error are:
  
  This is a feature not supported
  Exception: Exception
  Message: This is a feature not supported
  Source: Oracle.Policy.Modeling.MassCaseTester
  HelpLink:
  TargetSite: Boolean Check()
  Stack trace:
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)
  
  
  
  Thank you
  Aakarsh

  Unfortunately you are right - given reference are not supported in the current version of the MCT.

  It is expected that it be fixed for the 10.2 release.

• Name of user and password in a test procedure

  Hello
  
  Is it possible to test if a name of user and password are valid in a procedure?
  
  For example:
  -I log in as hr/hr@db1
  -call a procedure with to input a user name and a password and try to connect with the usr/pwd given (as a CONN under sqlplus)?
  
  Concerning
  Kukin Frane

  >
  The simplest way to implement it would be to generate a hash of the password for the username/password supplied name in and compare that hash with the hash stored password visible in the DBA_USERS view for this user name.
  >
  I prefer to just use a Java stored procedure that attempts to connect using the internal JDBC driver.
  1. no play with hashes
  2. no need to access the view DBA_USERS
  3. no maintenance question
  4. always a security risk to brute force tries to "guess" the password.

• An upgrade to 11.2, passwords are case-sensitive automatically?

  Operating system: Solaris 10
  
  We are upgrading to version 10.2.0.4 to 11.2.0.3? User passwords will automatically become case-sensitive after the upgrade?

  Tom wrote:
  Operating system: Solaris 10

  We are upgrading to version 10.2.0.4 to 11.2.0.3? User passwords will automatically become case-sensitive after the upgrade?

  No - you will need to reset the existing passwords after the upgrade to take advantage of this feature

  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/afterup.htm#UPGRD12434

  Passwords for accounts created after the upgrade automatically are case-sensitive.

  HTH
  Srini

• Mass case Tester: reference to aid data

  Hi all
  
  I tried to use the tester of mass case my based on rules.
  
  During the priming of the basis of rules, there is an option to 'Use reference data' initialization attr with values specified.
  
  I was wondering how I can create/write/modify this reference file in (.) XDS format) to use for the data REF. Is there a writer or a schema format / needs adhire to.
  
  
  Thank you

  This is the format used by the debugger within the OPM - so if you just build and debug without screens, you can enter your data and then use "Export to XML" to generate a file, which you can use to reference data.

  The format is also quite simple if you have an obligation to generate programmatically.

  Concerning

  Andrew

• Refreshing the R12 TEST DEV

  Hi all
  
  I intend to update an instance of an instance of Test development. The source and target are in the same server.
  
  I followed the Note: 406982.1 - cloning Oracle Applications V12 with rapid Clone. Here, I am referring to
  
  Section 4: Advanced cloning options Section
  
  3. set up the target system.
  
  Now my question is what do I have to use the xml system target file existing during the Post Clone using the syntax
  
  Perl adcfgclone.pl dbTier [context of database target file]
  
  Perl adcfgclone.pl appsTier [context APPL_TOP target file]
  
  or
  
  Should I start the
  
  Perl adcfgclone.pl dbTier
  
  Perl adcfgclone.pl appsTier
  
  1. I'm confused here because I don't know if I'm Port already in use error if I use the method later as I will reuse the existing port numbers.
  
  2. in addition, it would be great if you let me know how to get to the database and applications of port numbers. I know there is a rule of thumb to calculate the same.
  
  Kind regards
  
  Mahesh

  1. the question of whether I can use existing xml target file method or direct method when cloning a post?

  You can do both. If you do not plan to change the DEV instantiate details (port number, directory names, SID,... etc) and then use the existing context files.

  2. because I'm refreshing will the node (both source & target in the same server), I get in a 'Port already in use question' I need to reuse already configured port numbers.

  Not as you want to stop the DEV instance until you refresh it, if none of the ports will be in use.

  3. how to Port serial numbers? I suppose that there is a rule of thumb and a Metalink note for this but can't remember the ID. MetaLink

  See my previous response.

  Thank you
  Hussein

• Passwords are case-sensitive in 11g

  Hello
  
  It is a rather silly position, but I've been googling and can't find if Developer SQL supports case-sensitive or not connection. I read some other clients always send a 'uppercase' password (no matter how you typed it) that causes problems with Oracle 11 g. Is "compatible" with the new policy of the case-sensitivity of 11g SQL-Developer?
  
  Thank you.

  Yes SQL Developer is certainly compatible with the case of 11g password.

• Error is mass case tester for a modules having relationships

  Hello
  
  I was testing a simple modules having a self referring to relationships and company.
  When I use the MCT on this one then I get the following error when I put the value of "The number of instances of the entity that will be created" more than 1:
  (The same error is also to come if relations are not free, that is by invoking between two entities)
  
  Object reference is not set to an instance of an object.
  Exceptions: NullReferenceException
  Message: The object Reference not set to an instance of an object.
  Source: Oracle.Policy.Modeling.MassCaseTester
  HelpLink:
  TargetSite: Oracle.Modeling.MassCaseTester.RulebasePath BuildSolution(Double, Boolean, Oracle.Determinations.Engine.EntityInstance)
  Stack trace:
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)
  
  
  Thank you
  Aakarsh

  The case of mass tester cannot process relationships that are not the containment relationships.

  This limitation will be better reported in point 10.2

• Exception mass case Tester

  When you use the tester in case of mass for reporting, I'm getting the following exception:
  
  * "Think cycle is not stabilized after 20 iterations. This is probably due to a flaw in the earpiece of the inference. » *
  
  It's coming when I'm generating the following:

  comprehensive sample
  Random sample
  The decision chart

  what could be the possible causes for this?
  
  
  Here is the full error message, and the stack trace:
  
  Exception: IllegalStateException
  Message: Think cycle is not stabilized after 20 iterations. This is probably due to a flaw in the earpiece of the inference.
  Source: Oracle.Determinations.Engine
  HelpLink:
  TargetSite: Sub Think()
  Stack trace:
  at Oracle.Determinations.Engine.Local.LocalSession.Think)
  at Oracle.Determinations.Engine.Local.LocalSessionSync.Think)
  at Oracle.Determinations.Engine.Local.LocalSession.RequireThink)
  Oracle.Determinations.Engine.Local.LocalRelationship.SetInternal (source, list target entity, instance list notTargets, Boolean uncertain)
  at Oracle.Determinations.Engine.Local.RelationshipRule.Think (LocalSession session, list instances)
  at Oracle.Determinations.Engine.Local.LocalSession.ThinkStep)
  at Oracle.Determinations.Engine.Local.LocalSession.Think)
  at Oracle.Determinations.Engine.Local.LocalSessionSync.Think)
  at Oracle.Determinations.Engine.Local.LocalSession.RequireThink)
  to Oracle.Determinations.Engine.Local.LocalSessionSync.CreateEntityInstance (entity)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.CreateInstances (ArrayList contextChildren, entity, Int32 instanceCount EntityInstance owningInstance)
  to Oracle.Modeling.MassCaseTester.RulebaseChecker.BuildSolution (Double dSlice, Boolean bTop, EntityInstance owningInstance)
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)

  The bug I mentioned in the stack trace turned out in fact to be the source of the problem. This is a bug in 10.1 when alleged relationships are used when the engine is using what is called "Immediate" mode of thinking, rather than the mode of thinking 'Deferred' usual that virtually all uses. In this case the MCT is one of the few tools we have that immediate uses think that mode.

  I have found a workaround, which ironically uses a listener of inference to solve the problem. I'll email to you that I can not set anything in the public discussion forum.

  The problem is already solved for our next release, so should not be a problem in the future.

  Published by: Stephen French on 2 Sep 2010 19:20

• Generate sine wave with noise when simulating Compact Rio on computer test Dev

  How can I create a simulated IO vi. I tried to follow the tutorial, but it did not work. Do I need an array of pre filled with data for the business running or I can generate with one express vi? My IO vi does not seem to enter the case of race ever. What is the process of running this VI? He is running once or whenever the main vi trying some samples?

  Hi Bartekluk

  What tutorial did you follow? Please post the link and I'll take a look.

  Kind regards

• Oracle 12 c disable case-sensitive password

  Is this possible and how?

  According

  https://docs.Oracle.com/database/121/UPGRD/deprecated.htm#UPGRD60022

  
  

  The IGNORECASE argument of ORAPWD and the SEC_CASE_SENSITIVE_LOGON system setting are deprecated in Oracle Database 12c

  Indeed, they are considered obsolete - by default, passwords are case-sensitive.

  You can simply set SEC_CASE_SENSITIVE_LOGON FALSE.

• Password case sensitive of 11G + DB Vs Oracle 10g reports

  Dear Experts,
  
  Currently, we have migrated our database 10g R2 to 11g R2. 11g when using the password is case-sensitive and our password is the mixture of upper and lower charecters.
  
  Our Oracle application server version 10g R2. When we call the report from oracle forms its doesn't open is not the page.
  In queue in the report it shows as completed with error: REP-501: unable to connect to the specified database.
  But if we keep our db 11g password all higher report runs correctly.
  
  Where I have to change to have upper and lower as db 11g and 10g reports.
  
  This is the right place to post this thread here or I have to post under reports.
  
  Please help us.
  
  Kind regards
  Barry M

  Maybe it helps Re: 10.1.2.3 and RDBMS to Oracle 11g R2 forms

• Test password protection site

  Hi I wanted to password protect a test site I've been shooting to show the people you selected. I found this tutorial using PHP, which seems simple enough.

  http://www.zubrag.com/scripts/password-protect.php

  The only problem is that he says he'll show you code protection to include in your pages. "Example of protection code would look like this (yours will be different): <? PHP include("/home/users/htdocs/security/password_protect.php");? >

  Add this line of code to each php page you want to protect from the beginning of the source of the page (it should be the first line). "Now the problem is that my page is html based, can I add a PHP page token to my index page that does little code in password protect and how could I add the PHP page?

  Thanks in advance

  Hello

  I don't want to deter the .htaccess thing to try to get you. I will show you only a useful addition: my provider offers the possibility to protect every page of unauthorized access. I put a password in the suppliers form, and "at the drop of a hat", the necessary files are generated.

  Please ask your provider or look at his site to get this service.

  Hans G.

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.