Master - detail relatively successful and failure!

Similar Questions

• Custom messages of success and failure on quiz results slide

  I'm trying to create a custom message of success and failure on the quiz results slide, using certain colors in the text caption to reflect the brand of our company. I've added a tip action entering the slide, so that if the percentage of quiz is 80% or more, shows message of success and failure message leathers. It seems like it should work, but for some reason, only the fault message views, no matter if I fail or pass. Anyone tried this with any success?

  Thanks for your help!

  This button is very important: clicking on it will launch the actions that you define in Quiz preferences, success/failure. Think that it is also mentioned in my blog, when I talk about the score slide. Maybe that you were lucky, but I especially advice to add a line short slide after this slide score, certainly everything is transferred correctly, especially when launched by LMS and many users will do the test at the same time (I have used in a college for some exams). In this case you can set the actions of pass/fail on the issue level «Go to next page»

  This thread is marked still unanswered, so I guess it isn't completely resolved?

• Success and failure with Drag 'n Drop

  Drag n Drop works quite well, but I cannot understand how "Display success - failure - index" in this interaction

  Drop n Drag - Actions - I checked the legend of failure that works well. Also cancel and reset buttons work well.

  Impossible to get a button of success who says well done continue.

  The best I've done is 'Success here Type text' box appear in the presentation when you click on the page - to any random combination.

  Anyone had success or advice how to combine the button quiz success in drag n drop?

  appreciate advice

  Captivate 8 (new user)

  Check: advice & glide - Captivate blog

• HP Probook 4520 s memory 8 GB (2x4gb) Corsair pass without success and failure

  OK, here's the story

  My laptop is HP Probook 4520 s

  with Windows Windows 8.1 (6.3) 64-bit (Build 9600)

  Please see the end of this post for CPU - Z report of specs.

  Currently I have 3 GB of memory installed - had to install their return after failed upgrade.

  Please check back the CPU - Z report for the memory module specifications.

  I bought the memory pack 2 x 4 GB Corsair following

  Corsair CMSO8GX3M2A1333C9 8 GB (2x4gb) 1333 MHz DDR3 SODIMM

  http://www.scorptec.com.au/product/memory/SODIMM/43657-CMSO8GX3M2A1333C9

  Plug new modules:

  Lifetime warranty
  Size 8 GB (2 x 4 GB) Kit
  Performance profile none
  Fan included no.
  Heat spreader-
  Configuration memory dual channel
  Type of DDR3 memory
  Package - memory Pin 204
  Package - Format memory SODIMM
  Tested voltage 1.5
  SPD tension 1.5
  PC3-10600 (1333 MHz) memo speed
  SPD speed 1333 MHz
  Tested speed 1333 Mhz
  Tested latency 9-9-9-24
  SPD 9-9-9-24 latency

  When I installed the memory module on the laptop, I couldn't go essentially exceed the stage of the POST. Is the HP logo appears on the screen and what is it... That's all... nothing beyond this point.

  When I went to the BIOS settings, memory read 81xxMB successfully, it is essentially 8 GB of RAM.

  I tried to reset the BIOS settings, has not yet.

  I removed the 2 x 4 GB modules, put back the two original modules of 1 GB and 2 GB - those who came with the laptop-, everything worked again.

  What was not right here... ?

  PS please don't answer not with lame answers "it's weird", "that's strange", I know it's weird and strange. I want clear and specific suggestions.

  Report of CPU - Z below:

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 1.69.0.x64

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 4

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Thread 1 1
  -Core 2
  -0-4 wire
  -Wire 5 1

  Timers
  -------------------------------------------------------------------------

  Timer ACPI 3,580 MHz
  Timer HPET 14,318 MHz
  Timer perf 2,208 MHz
  Sys 1,000 KHz timer
  Timer 133,02 MHz BCLK

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25 Watts
  Basic speed 2527,3 MHz
  Multiplier x Bus 19.0 x 133.0 MHz speed
  2394,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT - x
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  2533 MHz Max turbo frequency
  Max-non-Turbo report 17 x
  Max turbo report 19 x
  Rate of return max 9 x
  TDC limited 21 amps
  Basic NT 21 Watts
  Uncore PDT 4 Watts
  Power @ 9 x 7 Watts
  Power @ 10 x 8 Watts
  Power @ 11 x 9 Watts
  Power @ 12 x 11 Watts
  Power @ 13 x 13 Watts
  Power @ 14 x 15 Watts
  Power @ 15 x 18 Watts
  Power @ 16 x 21 Watts
  Power @ 17 x 25 Watts
  Number of bus max 255
  PCI peripheral device connected to the 255 bus, device 2, function 1

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel Havendale/Clarkdale Host Rev. Bridge. 12
  Southbridge Intel HM57 Rev. 06
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 3 GB
  Double channels (symmetrical)
  Frequency 532,1 MHz memory (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096
  MCHBAR records

  DMI
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version 68AZZ version F.0F
  Day 18/02/2011
  ROM size 2560 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP ProBook 4520 s
  Unknown version
  series 2CE0211M4C
  UUID {1520830E-6A57-11DF-8C36-42C05900004D}
  SKU WS879EA #ABV
  family 103C_5336AN

  DMI Baseboard
  vendor Hewlett-Packard
  model 1411
  review of KBC Version 57,34
  series 2CE0211M4C

  DMI system box
  Manufacturer Hewlett-Packard
  chassis type Notebook
  2CE0211M4C series chassis

  DMI processor
  Manufacturer Intel(r) Corporation
  model Intel (r) Core i5 CPU M 430 2.27 GHz
  clock speed 2264,0 MHz
  The FSB 133.0 MHz speed
  multiplier x 17.0

  DMI Extension slot
  PCI SLOT1 designation
  type of PCI
  32-bit width
  No. populated

  DMI OEM channels
  String [0] 70/71 79 7 ABS has 7 b 7 c
  v01.4A CSM chain [1]
  chain [2] www.hp.com

  DMI physical memory matrix
  location motherboard
  use system memory
  correction no
  Max 8192 MB capacity
  Max # of devices 2

  DMI memory device
  name high-Slot 1 (top)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  Size 2048 MB

  DMI memory device
  name high-Slot 2 (under)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  size 1024 MB

  Storage
  -------------------------------------------------------------------------

  Drive 0
  Device path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
  Type set
  Name ST9320423AS
  Capacity GB 298,1
  SMART Support Yes

  USB devices
  -------------------------------------------------------------------------

  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB device USB Composite class = '0xEF' subclass = 0 x 02, seller = 0 x 0461, product = 0x4DB6
  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB Microsoft mouse and detection (USB) keyboard driver, class = "0x00" subclass = 0 x 00, vendor = 0x045E, product = 0 x 0745

  Graphics
  -------------------------------------------------------------------------

  Number of cards 1

  API chart
  -------------------------------------------------------------------------

  ATI I/O API

  Graphics cards
  -------------------------------------------------------------------------

  Display adapter 0
  Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
  Manufacturer 0x103C (0 x 1411)
  512 MB memory size
  Bus device PCI 1 (0x1), device 0 (0x0), function 0 (0x0)
  Vendor ID 0 x 1002 (0x103C)
  The model 0 ID 9555 x (0 x 1411)
  Performance level 0

  Win32_VideoController AdapterRAM = 0x20000000 (536870912)
  Win32_VideoController DriverVersion = 8.97.10.6
  Win32_VideoController DriverDate = 20/06/2012

  Software
  -------------------------------------------------------------------------

  Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
  Version of DirectX 11.0

  Clear and precise. Your laptop uses the memory of 1.35 volts and that you have installed 1.5 volt.

  This is the crucial page for memory you need:

  http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to connect success and details of connection attempt failed router to Syslog?

  All,

  How can I configure my router Cisco 837 to log to syslog all successful and attempted connection failed to the router via any interface?  I would like to get very verbose information about attempts to connect (success and failure) as possible, including the source, userid attempted, ip address etc.

  All comments and suggestions would be greatly appreciated!

  James

  Archives
  The config log
  Enable logging
  notify the contenttype in clear syslog
  hidekeys
  opening of session
  192.168.1.1 logging
  block connection-for 60 tent 3 within 60
  connection sur-Echec connect all the 1
  connection on success - open a session every 1

• master/detail relationship through two workflow

  Hello world

  I use jdev 11.1.1.7.0.

  In my application, I created a relationship master-detail between departments and employees (departments is master and employees is detail). Then, I created two stubborn workflow.

  Department-stream with a department.jsff and I drag / drop the departmentVO as a form.

  

  employee-stream with an employee.jsff, on this page I drag / drop employeeVO located under departmentVO in the control panel of data:

  

  can I use these two TFs (Department-flow and employee-flow) through two different ways

  1- I create a main.jspx page and I put two TFs as an area on main.jspx.

        <af:form id="f1">
          <af:region value="#{bindings.departmentflow1.regionModel}" id="r1"/>
          <af:region value="#{bindings.employeeflow1.regionModel}" id="r2"
                     partialTriggers="::r1"/>
        </af:form>
  
  

  in this case when I run the homepage, two TFs are in sync with each other, I mean when I navigate between departments in the workflow Department, employees in the employee flows are discount

  and also if I enlist in the workflow Department then changes in the flow of employee will be validated.

  2- in this case first I create a master stream with an master.jsff and then I put two TFs as an area on master.jsff.

   <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <af:region value="#{bindings.departmentflow1.regionModel}" id="r1"/>
    <af:region value="#{bindings.employeeflow1.regionModel}" id="r2"
               partialTriggers="::r1"/>
  </jsp:root>
  
  

  and finally I put flow master as a region on the page main.jspx.

         <af:form id="f1">
          <af:region value="#{bindings.masterflow1.regionModel}" id="r1"/>
        </af:form>
  
  

  in this case, when I run the main.jspx , always the two page two TFs are in sync with each other (updating of employees when I navigate between departments)

  but in this case the validation in the workflow Department commit not changes in the flow of employee.

  Anyone know how I can I have this (validation cause Department-stream flow used as case 1)?

  Habib

  Concerning

  Habib,

  I just did what you said.

  1. Ran the mainWithMasterFlow.jspx,

  2. the Department rendered initially has only one employee.

  3. has changed the salary. (Kept the emphasis placed in the same field)

  4 click "Commit".

  Above scenario failed, because the change in value has not been submitted. Try adding autoSubmit = true for the salary field and then repeat the procedure, you will see the file be saved.

  Rambeau

• Replace the legends of success or failure with images.

  Hello
  
  Can I use legends of success and failure for clickboxes or buttons.
  
  Is it possible to display an image of success or failure in place?
  
  Brian

  Hi Brian

  I saw your post earlier today. Unfortunately (actually fortunately in this case) I was unable to answer, because I was in the middle of the realization of a class of Captivate. At that time, I probably would have advised that it is simply not possible.

  Tonight, after reviewing things again and passing through the messages of today, I almost responded again with a resounding no. Then I suspended and figured it out. That thought, was how these subtitles are really just still images. Where the text is superimposed background images. Then, I remembered that when you select the image used for the background of a legend, a choice appears on the list that allows you to navigate to a desired image. So I tested and here's the deal.

  Double-click the legend of feedback
  Select the text that has been provided and delete
  Click the type of legend drop-down and scroll the selection to the end. You should see .
  Select the item and dialogue should appear immediately. It should contain 'Open' in the title bar.
  Note that this dialog box is programmed so that the images in list in. In BMP format. Don't let this discourage you if your image is in a different format. Perhaps. GIF or. JPG. All you need to do is navigate to the location where your image is, and then in the file name field, type *. GIF or *. JPG and press ENTER to display images of this type.
  Click to select your image and click on the OK button.
  Now, your image must be pulled in the slide, but it seems rather odd. This is because it has been extended to the size of the legend. Do not alarm you. All you have to do is to adjust the size so the image seems appropriate. It is enough to click on one of the corner resize handles and try to make the image as small as possible. You will notice that you cannot resize the tiny image what she really is.

  And there you have it!

  Sincerely, I hope that's what you're looking for and it helps out you. Rick

• Master-detail functionality between the regions of PL/SQL and IR possible?

  4.2.1

  THM 2

  Hi all

  We have two regions in a page. The upper region is a region of PL/SQL that lists the 5 best wages by Dept. This was not done using traditional reports because management wanted a "dashboard" as the look and feel that is already existing and what is happening in that it is a pl/sql block that has the sliders and the necessary HTML, CSS in there.

  Below that is an IR when the user clicks on the dept of region of PL/SQL, it will refresh the IR below to display all employees in this Department

  Top of the page shows region of PL/SQL

  EMP name Dept wage

  Emp1 10 10000

  EMP2 10 950

  Emp3 20 800

  The Dept field is a hyperlink.

  When we click on Dept on this region of PL/SQL

  The lower IR should be updated (without submit page)

  Output

  Emp1 10 10000

  EMP2 10 950

  It is a kind of master-detail relationship between PL/SQL and Report (Detail) (Master) area Interactive

  We can hyperlink in the SQL in pl/sql area, but you wonder how trap line and pass the dept id to the IR and get this region to refresh account?

  All suggestions from the experts?

  Thank you

  Ryan

  It is a way to pass the info in connection

  Perform the dynamic Action of the link column report

  The dynamic action can submit the session state value, and then refresh the IR.

  On either by the way, you must create dynamic PL/SQL region to solve this problem, see this

  APEX reports: layout custom with a column named (model line)

• tree and master detail on same page oracle apex

  Hello.

  How can I create a form in the apex that contains a tree view and a master in detail on the same page?

  I already finished the tree, but when I finished the master Wizard detail, apex automatically creates a new page.

  any ideas?

  I use apex 4.2

  Thanks in advance.

  Siberia wrote:

  Hello.

  How can I create a form in the apex that contains a tree view and a master in detail on the same page?

  I already finished the tree, but when I finished the master Wizard detail, apex automatically creates a new page.

  any ideas?

  I use apex 4.2

  Thanks in advance.

  Backtrack. First create a form page master detail. On this form Page then create the tree. So the shape and the tree will be on the same page.

  BR,

  Patrick

• Updating of the master/detail does not work after the failure of the validation

  After validation of the judgment of the further processing of a page page page master detail, I get the error message Oracle depending on the display of the detail portion:

  < code >

  ORA: 01445: cannot select ROWID, or sample, a view of join without key preserved table.

  ORA-06510-PL/SQL unhandled exception defined by the user.

  < code >

  
  

  Clues as to why this might happen?  The master of the page displays fine as well as the validation error message personalized appropriate. It's just part of detail (from SQL-based report) that is causing the problem.  I use either a ROWID.

  
  

  Thank you!
  

  Just an info for all those who may have this same problem in the future.  I corrected the error and it had nothing to do with the ROWID or views or something like that.  Under the section of Page rendering when you set the definition of the region in the source section, I included the "order by" clause in my SQL statement.  This was the cause of my ORA-01445 error!  When I removed the clause of the definition of the source, and instead included in the attributes report by checking the box of the appropriate column sorting (which allows the apex generate so for me), the error has disappeared!  The error message Oracle NEVER would have given me a clue to what caused the error.  I joined just thinking 'what if I take the order by clause.  What's a flukey fix!

• Master - Detail of the object View and Javabean

  I have a table with data from VO (database, let's say in table A). This table has Id, name and processId table. I also have a second table below the first table, what data comes from a javabean (source data not DB). I created this bean data control, which in turn, I created the second table.
  What I want to achieve, it is when a user to select a row in the first table, I wish that the second table is updated according to the processId value of the selected row in the first table.
  Would you share how to do it?
  
  Thank you.

  Hello

  my Oracle Magazine July/August 2012 column covers a similar use case of Web Services that work in a relationship master / detail with ADF business components view objects. In this article I recommend using the programmatic view objects and entities that this ensures the consistency of the master / detail is handled by the template and cannot be controlled manually on the view layer. I think that the possibility of using a JavaBean domain controller and synchronize it with the object View is a valid option, however, if the rest of your application using ADF business components then I would consider programmatic view objects (and entities if the app is CRUD to the POJO too)

  Here's a sample and a good report:

  http://jobinesh.blogspot.in/2011/06/building-programmatically-managed_25.html
  http://jobinesh.blogspot.in/2011/06/building-programmatically-managed.html

  Frank

• Difference between Master detail report and Drill Down

  Hello
  
  I want to know the difference between Master detail report and Drill Down. I'm confused about their use. Can inform you when to use what?
  
  Help appreciated
  
  Pradeep

  You must first help yourself by searching instead of these initial questions.

  Master in detail:
  As a condition of purchase order. The master is arrested in detail, and the details are elements...

  Dril Down:
  As the opening of report the report as hyperlink for more details...

  -Clément

• Spry experiments Panel tabs and master/detail Page Set

  Hello

  I created a feedback form and uses a Spry tabs Panel to allow users to review the answers to a question and then answers the question in different tabs, there are 6 tabs at all. In every tab I have created a Master / Detail Page set - well actually just the master appears in the tab. It works very well. I'm up to 20 answers to appear on every page, after which the user selects first/previous/next/last. When they do the screen refreshes and the tabs panel display goes back to the tab by default, clicking on the previously used tab correctly displays according to of first/previous/next/last selected user. I would like that the display to stay on the user's current tab when they select the first/previous/next/last.

  The page in question is here http://www.hollisterairshow.com/feedback-results2.php, then scroll to halfway to the bottom of the page.

  Thank you.

  Tony

  Hi Tony,.

  Take a look here http://labs.adobe.com/technologies/spry/samples/data_region/PagingSample.html and here http://labs.adobe.com/technologies/spry/samples/data_region/SpryPagedViewSample.html

  If you need help, go to the Spry Forum http://forums.adobe.com/community/labs/spry

  I hope this helps.

  Ben

• Master / details enable and disable

  Hi all
  
  I am developing web app using jdeveloper 11.1.2.0
  
  On my page, I have a paintings of master / details
  I want to disable a field in the secondary table when a particular value in a field (in the drop-down list) is selected in the main table
  
  Thank you

  I did not understand you?
  ADF is smart enough to recognize the line currently selected in the master.

• Problem with page validation APEX_APPLICATion master detail.  Help!

  I'm having a problem with the Apex_Application.g_fxx data structure.  I'm trying to validate the lines in my page master detail and need to use apex_application.g_f10 as the name of the variable inside the HTML data source electricity.  The name of the item I need is "f10" because it matches the database column "status" on my page.  I'm trying to validate that all the detail items have the same status, or an error is reported.  I use the following PL/SQL block that returns a Boolean value:

  < code >

  declare
  l_first_value varchar2 (4000);
  Start

  -f10 = column PO_STATUS of PO_DETAILS table on a part as a table on the page.

  l_first_value: = apex_application.g_f10 (1);
  because me in 2... apex_application.g_f10. COUNTY
  loop
  If l_first_value! = apex_application.g_f10 (i)
  then
  Returns false;
  end if;
  end loop;
  Returns true;
  end;

  
  < code >

  The HTML data that I is not intended to "f10" are the following:

  < code >

  < td headers= "Status" class= "t20data" >

  < label for= "f10_0000" class= "hideMeButHearMe" >status< /label>

  < Select name="f10"  id="f10_0000">

  < option value= "" selected= "selected" >make a selection< /option> ""

  < option value= 'APPROVED' >APPROVED< /option>

  < option valeur= « FERMÉ » >FERMÉ< /option>

  </ Select >

  < entry type="hidden" name="f02" value=""  id="f02_0000" />

  < entry type="hidden" name="f03" value="30427" id="f03_0000" />

  < entry type= 'hidden' id= "fcs_0000" name= "fcs" value= "2158A9B101842608F4CA966C0BC1433D" >

  < entry type="hidden" id="frowid_0000" name="frowid" value="" />

  < entry type="hidden" id="fcud_0000" name="fcud" value="D" />

  </ td >

  
  

  < code >
  

  So I do not know why there could be a problem when used to work before this validation.  The PL/SQL block takes the first line of F10 data and compare it to successive lines.  If the data is not equal, then an error occurs and the user is prompted to adjust the data.

  It doesn't work anymore, although I checked and the status are still of points in F10.

  I left mouth gaping.  I do not use an official page master detail previously.  I used two separate front pages: one for the header and one for show master detail.  I've updated the page for the treatment of the more fluid user. I think that even if the data structure would be the same, but maybe I'm wrong.

  Any ideas?

  
  Thank you!

  Thank you to reproduce the problem so overall. Note that if you will share your workspace in this way you need to change your username to something else than a direct email address and don't use not the actual data for your test cases. Create a guest account to developer without administrator privileges to work space for the members of the forum to use.

  Validation in this app is coded to use a different picture of the description in this thread. Above, you have identified the point like g_f10 dashboard, but the validation code is using g_f09:

  declare
    l_first_value  varchar2(4000);
  begin
  -- f09 = PO_STATUS column of PO_DETAILS table
    l_first_value := apex_application.g_f09(1);
    for i in 2 .. apex_application.g_f09.COUNT
    loop
      if l_first_value != apex_application.g_f09(i)
      then
          return false;
      end if;
    end loop;
    return true;
  end;
  

  Therefore (thanks to instrumentation code added), the validation is running by using the values of the previous column, which was be the one that I have changed according to your instructions:

  0.09114	0,00018	... Posting type "Status check IN." -: FUNC_BODY_RETURNING_BOOLEAN	4	0%
  0.09132	0,00049	... Run the statement: select count (*) in the sys.dual where exists (Select 1 from PO_DETAILS where PO_ID =: P230_PO_ID)	4	0 g
  0.09181	0,00015	...... Result = true	4	0%
  0.09196	0.00573

  ... Run the statement: declare function x return boolean is begin declare

  l_first_value varchar2 (4000);

  Start

  -f09 = PO_STATUS table PO_DETAILS column

  l_first_value: = apex_application.g_f09 (1);

  apex_debug.message ('g_f09 (1): %s, l_first_value);

  because me in 2... apex_application.g_f09. COUNTY

  loop

  (apex_debug.message('g_f09(%s): %s, i, apex_application.g_f09 (i));

  If l_first_value! = apex_application.g_f09 (i)

  then

  Returns false;

  end if;

  end loop;

  Returns true;

  end;

  Returns a null value. end; begin wwv_flow.g_boolean: = x; end;

  4

  28%

  0.09769

  0.00005

  g_f09 (1): TEST2

  4

  0%

  0.09773

  0.00010

  g_f09 (2): TEST

  4

  0%

  0.09783

  0,00003

  ...... Result = false

  4

  0%

  0.09786

  0.00004

  ...... Does NOT pass

  I created a new liquidation which uses the correct column, but at some point the validation passes and data, so I didn't get a chance to conduct tests.