material high interrupt CPU under Windows 2003

Similar Questions

• Is possible to do a task under windows 2003 server depends on the performance of a separate task?

  Windows 2003 server question

  Is possible to do a task under windows 2003 server depends on the performance of a separate task?

  Why are you asking a question of Windows Server 2003 in a Windows XP forum?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• install ESXi on an existing machine under windows 2003

  Hi all

  I'm new to VMware and I just installed ESXi on a machine with server 2003 installed. My questions are:

  1: can I still access my windows 2003 server, bypassing the connection of ESXi? If so, how? If not, it means that after I had installed ESXi on this machine, Server 2003 is removed.

  2: How do I reinstall the ESXi on this machine?

  I converted two of my physical servers into virtual machines using the converter. And my questions are:

  1: after you import the virtual machine, I deleted it from the VMware client. This particular virtual machine is no longer visible but still displays taking up resources such as HDD, CPU, RAM etc. How to release my resources?

  2:i have two network cards in the physical server, and when I've converted and brought it into a VMware customer, everything is ok except the network cards. They show that some cards AMD NIC. I'm not able to use network cards. And I already tried to convert twice i just cases that something went wrong with conversion. but the problem remains.

  Thank you.

  AG

  As the other poster mentioned, (ESXi and ESX) are installed bare metal - they install their operating systems, so I think your Win2k3 installation is missing if you have it installed on the same disk.

  When you removed the VM you remove disk or delete forminventory - if you have removed the inventory and it was running, it will still resources - for the correction of network cards virtual you need to install VMware tools - this will load the appropriate virtual machine drivers and it will improve your performance - up to this virtual material of your virtual machine will be identified as a physical hardware as the AMD PCnet Ethernet controller-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Crescent of cpu and memory under windows 2003

  Hello

  I have a windows Server 2003 R2 SP2 virtual machine with 1 cpu and 4 GB of memory.

  Can I increase cpu 1 to 4

  In the past, I've increased cpu 2 to 4 on similar without any problem, but not sure machines ranging from 1 to 4 cpu

  In the past, take action:

  Turn off the virtual machine

  Take snpshot

  increase the number of cpu 2 to 4

  increase of 2 to 4 GB memory

  Start the virtual machine

  Check Device Manager to make sure that the additional processors are visible

  Check the additional memory is visible

  Remove the snapshot

  Instant return if the process fails

  What also vmware WARNING "change the number of CPUs after the guest OS was isntalled can make your virtual machine unstable."

  Thank you

  Hello

  I did this operation, hundreds of times, no problems at all. Problem may occur when you reduce several CPU single-processor. Going from simple to several CPU no problem at all. Of course good to have a clone\snapsot of virtual machine before you make any change :-)

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• FMS3 and AMD 64 bit under Windows 2003 R2?

  I installed FMS 3.0 on a HP Proliant server with processor AMD 64-bit running Windows Server 2003 R2. The FMS service is running, I can see connects to the application of the "vod" provided, but I can't listen to any video. County data transfer remains low. I have no idea why its not working and now think FMS 3.0 is not easy to AMD or (worse) is not 64-bit friendly. Anyone for some?
  
  It is strange that such a cutting-edge product is not 64-bit. Its becoming very difficult to purchase native 32-bit servers (nine in any case).
  

  The answer is Yes, it works. The question was a configuration error on my part (because of a confusing configuration example).

• shared printer under Windows 2003, freeing not always jobs for printer

  I have a laser printer of HP Networking installed with a fixed IP address on my Win 2003 server and shared on the network.

  When I send a job to the printer from a workstation it can take up to half an hour before being sent to the printer and all watch upin the queue.

  If I turned off the printer and then turn it back on, all queue jobs start printing immediately.

  Prevents them from taken in charge by the printer?

  I changed the network switch and the cable from the printer. Everything else on the network works perfectly.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Database standby manual (10.2.0.2.0) under Windows 2003 R2

  Hello
  
  We are developing a database of Eve at a remote site for a simple oracle DB. As we already have a standby/master for another Oracle DB (from SAP) we want to stay as close as possible to what already exists.
  For SAP Oracle standby, we manually copy all archived on the stand-by and apply them with brarchive. Everything works very well.
  For new standby, we cannot use brarchive as there is no SAP installation on the eve, but we stay with the 'manual' copy of the archive from the master to the waiting (via robocpy). This means that all archives are on standby mode (K:\oracle\oradata\archive).
  The creation of the DB in waiting seems to be OK I open it, but I can't seem to apply redo logs.
  
  I am quite new to oracle, so maybe it's a very basic question, but I already spent 3 days on this subject...
  
  To start the DB, we throw a bat script:
  sqlplus/nolog @c:\backup\standby.sql
  pause
  
  the standby.sql:
  connect /@TECDB01 as sysdba
  startup nomount;
  ALTER database base_de_donnees eve of Mount;
  "exit";
  
  Can I connect to sqlplus and enter:
  change recover managed standby database;
  
  In another sqlplus session:
  SELECT PROCESS, STATUS, THREAD #, SEQUENCE #, BLOCK #, BLOCKS FROM V$ MANAGED_STANDBY;
  which give me:
  STATUS OF PROCESS THREAD # SEQUENCE # BLOCK # BLOCKS
  ARCH CONNECTED 0 0 0 0
  ARCH CONNECTED 0 0 0 0
  Mr (FG) 1 45400 WAIT_FOR_GAP 0 0
  RFS IDLE 0 0 0 0
  
  45400 sequence seems to be ok about the time of the backup that is restored on the eve.
  Archive is on the server, but it will not be applied.
  
  The Alert_TECDB01.log:
  Fri 29 Oct 11:03:43 2010
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  SNA system picked latch-free 3
  Undo retention Autotune is turned on.
  IMODE = BR
  ILAT = 121
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  ksdpec: called to the event 13740 before initialization of the event group
  Commissioning ORACLE RDBMS Version: 10.2.0.2.0.
  Parameters of the system with default values:
  process = 999
  SGA_TARGET = 7214202880
  control_files = I:\ORACLE\ORADATA\CNTRL\STANDBY. CTL, J:\ORACLE\ORADATA\CNTRL\STANDBY. CTL, K:\ORACLE\ORADATA\CNTRL\STANDBY. CTL
  DB_BLOCK_SIZE = 8192
  compatible = 10.2.0.2.0
  Log_archive_dest_1 = RENTAL = K:\oracle\oradata\archive
  LOG_ARCHIVE_DEST_2 = SERVICE = TECDB01
  log_archive_dest_state_1 = enable
  LOG_ARCHIVE_DEST_STATE_2 = enable
  standby_archive_dest = K:\oracle\oradata\archive
  ARCHIVE_LAG_TARGET = 1800
  db_file_multiblock_read_count = 16
  UNDO_MANAGEMENT = AUTO
  undo_tablespace = RBS
  UNDO_RETENTION = 10800
  Recyclebin = OFF
  Remote_login_passwordfile = EXCLUSIVE lock
  db_domain = EVERYONE
  dispatchers = (ADDRESS = (PROTOCOL = tcp) (HOST = xxx.xxx.xxx.92)) (DISPATCHERS = 4) (CONNECTIONS = 1000)
  SHARED_SERVERS = 100
  LOCAL_LISTENER = (ADDRESS = (PROTOCOL = TCP)(HOST=xxx.xxx.xxx.92) (PORT = 1521))
  session_cached_cursors = 300
  UTL_FILE_DIR = \\srvuniway.vrithoff.srwt.tec-wl.be\hotspots
  JOB_QUEUE_PROCESSES = 10
  audit_file_dest = I:\ORACLE\ADMIN\TECDB01\ADUMP
  background_dump_dest = I:\ORACLE\ADMIN\TECDB01\BDUMP
  user_dump_dest = I:\ORACLE\ADMIN\TECDB01\UDUMP
  core_dump_dest = I:\ORACLE\ADMIN\TECDB01\CDUMP
  db_name = TECDB01
  open_cursors = 3000
  pga_aggregate_target = 1086324736
  PMON started with pid = 2, OS id = 4012
  PSP0 started with pid = 3, OS id = 3856
  MA started with pid = 4, OS id = 3580
  DBW0 started with pid = 5, OS id = 1084
  LGWR started with pid = 6, OS = 576 id
  CKPT started with pid = 7, OS id = 3516
  SMON started with pid = 8, OS = 508 id
  RECCE has started with pid = 9, OS id = 3068
  CJQ0 started with pid = 10, OS id = 2448
  MMON started with pid = 11, OS id = 2840
  MMNL started with pid = 12, OS id = 3024
  Fri 29 Oct 11:03:44 2010
  commissioning 4 dispatcher (s) for '(ADDRESS =(PROTOCOL=tcp) (HOST = xxx.xxx.xxx.92))' network address...
  commissioning or servers shared 100...
  Fri 29 Oct 11:03:45 2010
  change the basis of mountain rescue
  Fri 29 Oct 11:03:51 2010
  Definition of embodiment of recovery target 2
  ARK: START OF THE ARCH PROCESS
  Arc0 started with pid = 118, OS id = 3584
  Fri 29 Oct 11:03:51 2010
  Arc0: Started archiving
  Arc1 started with pid = 119, OS id = 3688
  Fri 29 Oct 11:03:51 2010
  Arc1: Started archiving
  ARCH: FROM PROCESS ARCH COMPLETE
  Fri 29 Oct 11:03:51 2010
  Arc0: become the "no FAL' ARCH
  Fri 29 Oct 11:03:51 2010
  Mount of redo thread 1, with mount id 3987142355
  Fri 29 Oct 11:03:51 2010
  Arc0: become the "no SRL" ARCH
  Fri 29 Oct 11:03:51 2010
  Arc1: Become the heartbeat ARCH
  Fri 29 Oct 11:03:51 2010
  Physical Standby Database mounted.
  Completed: alter database mount standby
  Fri 29 Oct 11:04:06 2010
  change recover managed standby database
  Fri 29 Oct 11:04:06 2010
  Managed Standby recovery not using real time applies
  parallel recovery started with 7 process
  Media, recovery waiting for thread 1 sequence 45400
  Pick up the empty sequence in thread 1, 45400-45499 gap sequence
  + FAL [client]: error recovery gap sequence, no specified FAL server +.
  Fri 29 Oct 11:04:37 2010
  + FAL [client]: could not ask gap sequence.
  GAP - thread 1 sequence 45400-45499
  3776455083 670241032 DBID branch
  + FAL [client]: all defined FAL servers have been tried. +
  -------------------------------------------------------------
  Check that the initialization of CONTROL_FILE_RECORD_KEEP_TIME
  parameter is set to a value large enough
  enough to keep adequate record switch information to solve
  ARCHIVELOG gaps.
  -------------------------------------------------------------
  Fri 29 Oct 11:04:51 2010
  Again shipping customer logged in as PUBLIC
  -User is valid
  RFS [1]: assigned to the RFS 3452 process
  «RFS [1]: Type of database called a ' standby' physical «»
  Fri 29 Oct 11:04:51 2010
  LogMiner RFS: Disabled Client of the another view
  
  The tecdb01_arc1_3688.trc:
  I:\oracle\admin\tecdb01\bdump\tecdb01_arc1_3688.TRC dump file
  Fri 29 Oct 11:03:51 2010
  ORACLE V10.2.0.2.0 - Production of 64-bit vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10 g Enterprise Edition Release 10.2.0.2.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  Windows NT Version V5.2 Service Pack 2
  UC: 8 - type 8664, 2 physical cores
  Process affinity: 0 x 0000000000000000
  Memory (success/Total): Ph: 7467 M / 9215 M, Ph PgF:2454 M / 10796 +.
  Instance name: tecdb01
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 119
  
  Windows thread ID: 3688, image: ORACLE. EXE (ARC1)
  
  
  NAME OF THE SERVICE :() 11:03:51.177 2010-10-29
  SESSION ID: (1088.1) 2010-10-29 11:03:51.177
  kcrrwkx: nothing to (early)
  11:04:51.129 2010-10-29
  Repeat customer shipping performing a pending connection
  2010-10-29 11:04:51.176 64529 kcrr.c
  Connected mode standby successfully
  Customer logon and security successful trading!
  kcrrwkx: nothing to (end)
  11:05:51.285 2010-10-29
  kcrrwkx: nothing to (end)
  11:06:51.300 2010-10-29
  kcrrwkx: nothing to (end)
  
  The initTECDB01.ora:
  ##############################################################################
  # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
  ##############################################################################
  
  ###########################################
  # Archive
  ###########################################
  ARCHIVE_LAG_TARGET = 1800
  Log_archive_dest_1 =' LOCATION = K:\oracle\oradata\archive'
  
  ###########################################
  IO and cache memory #.
  ###########################################
  DB_BLOCK_SIZE = 8192
  db_file_multiblock_read_count = 16
  
  ###########################################
  # The library Cache and sliders
  ###########################################
  open_cursors = 3000
  session_cached_cursors = 300
  
  ###########################################
  # Identification of the database
  ###########################################
  db_domain = EVERYONE
  db_name = TECDB01
  
  ###########################################
  # Diagnostic and statistical
  ###########################################
  background_dump_dest = I: \oracle\admin\TECDB01\bdump
  core_dump_dest = I: \oracle\admin\TECDB01\cdump
  user_dump_dest = I: \oracle\admin\TECDB01\udump
  
  ###########################################
  # Configuration file
  ###########################################
  control_files = ("I:\oracle\oradata\cntrl\standby.ctl", "J:\oracle\oradata\cntrl\standby.ctl", "K:\oracle\oradata\cntrl\standby.ctl")
  
  ###########################################
  # Work queue
  ###########################################
  JOB_QUEUE_PROCESSES = 10
  
  ###########################################
  # Various
  ###########################################
  compatible = 10.2.0.2.0
  Recyclebin = OFF
  
  ###########################################
  # Process and Sessions
  ###########################################
  process = 999
  
  ###########################################
  # SGA memory
  ###########################################
  SGA_TARGET = 6880M
  
  ###########################################
  # Pools
  ###########################################
  #java_pool_size = 150 M
  
  ###########################################
  # Security and audit
  ###########################################
  audit_file_dest = I: \oracle\admin\TECDB01\adump
  Remote_login_passwordfile = EXCLUSIVE lock
  
  ###########################################
  # Shared server
  ###########################################
  SHARED_SERVERS = 100
  Dispatchers = "(Address = (Protocol = TCP) (Host = xxx.xxx.xxx.92)) (DISPATCHERS = 4) (Connections = 1000)" "
  #dispatchers = "(PROTOCOL=TCP) (SERVICE = TECDB01XDB)" "
  
  ###########################################
  # Sort, hash joins, index Bitmap
  ###########################################
  pga_aggregate_target = 1036M
  
  ###########################################
  # System managed Undo and Rollback Segments
  ###########################################
  UNDO_MANAGEMENT = AUTO
  UNDO_RETENTION = 10800
  undo_tablespace = RBS
  
  LOCAL_LISTENER = "(Address = (Protocol = TCP)(Host=xxx.xxx.xxx.92) (port = 1521))" "
  
  # NIDA - 28.10.2010 - repeat applies
  log_archive_dest_state_1 = enable
  LOG_ARCHIVE_DEST_2 = "SERVICE = TECDB01'"
  LOG_ARCHIVE_DEST_STATE_2 = enable
  standby_file_management # = auto
  standby_archive_dest = K:\oracle\oradata\archive
  
  And the TNSNAMES.ora:
  
  tnsnames.ora # Network Configuration file: C:\oracle\102\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  #this is switched to standby
  TECDB01. VRITHOFF. SRWT. TEC - WL.BE =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.92) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = TECDB01)
  )
  )
  
  #
  # This file is written by Oracle Services For MSCS
  # Sat Nov 08 10:44:27 2008
  #
  
  #this is the master
  PRIMARY. VRITHOFF. SRWT. TEC - WL.BE =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.246) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = TECDB01)
  )
  )
  
  EXTPROC_CONNECTION_DATA. VRITHOFF. SRWT. TEC - WL.BE =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = TECDB01))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = TECDB01)
  )
  )
  
  Hope you have all the information to get back me in the right way.
  
  Kind regards
  
  Nicolas

  but we stay with the 'manual' copy of the archive from the master to the expectation (using robocpy). This means that all archives are on standby mode (K:\oracle\oradata\archive).

  In this case, you should not use the keyword MANAGED in get it BACK... DATABASE PENDING.

  MANAGED applies when Eve is part of an 'Oracle Standby' infrastructure where the primary ships archivelogs (by ARCH or LGWR) and a processs RFS on the eve receives files, update the local controlfile (on standby).

  If you do manual shipping you use RECOVER STANDBY DATABASE (interactive mode) or RECOVER AUTOMATIC STANDBY DATABASE (automatic mode that stops when it cannot see any archivelogs more). These modes are not based on the controlfile Eve know what archivelogs are available but in fact search archivelogs (similar to the DATABASE with the HELP of BACKUP CONTROLFILE RECOVERY what who is not aware of the "later" archivelogs, but seeks only to the log_archive_dest expected).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• DR Setup with ebs 11i & databases under windows 11.2.0.3

  Hello

  We have requirements of DR Setup with ebs 11i & 11.2.0.3 database under windows 2003 server 32-bit.

  We follow the metalink document

  Business continuity for Oracle E-Business Release 11i using Oracle 11 g Release 2 and versions later

  Physical Standby Database - Single Instance and Oracle RAC (Doc ID 1068913.1()

  But for many windows of missing steps in this document.

  If someone made the related activity in windows.

  Good to want to share documents through my mail ID: [email protected]

  Thanks and greetings

  Villi Kumar

  Hello

  We created the recovery after disaster for 11i ebs in a windows environment.

  Now, we are conducting an application and a database shall also.

  Once we transition from the primary to the standby, day before the application runs with the new URL.

  Therefore, inform our users about the new URL of the application.

  Thank you & best regards

  Villi Kumar

• SQL 2000 on Windows 2003, which is a physical machine is vSphere6 (P2V) using last Converter?

  Hi all

  I am considering P2V, i.e. 2000 SQL under Windows 2003, in vSphere environment 6. Lastes converter he takes?

  If this is not the case, how can I do? With the help of old converter? I did not before P2V. Your opinion will help a lot.

  Hello

  It seems to work (tested with 6.1.1)

  I would say stop all sql processes before the conversion.

  Reg

  Chris

• Windows 2003 R2 + GParted = / = increased the boot partition

  Hello

  I am trying to increase my partition to boot under Windows 2003 R2. I have added space for the vmdk, ran GParted and extended with success the C: partition. When I start the machine the C: reports the old smaller value. I ran the check disk and ran fixmbr, but the problem is not resolved. I've attached a picture showing the problem circled in red.

  Thank you.

  I saw this happen once or twice now. It seems that the end partition information are not defined correctly in the gparted partition table in some cases. Usually a resize another (minor) will fix the problem.

  André

• Ora_dba group is not present in windows 2003

  How to create group ora_dba/ora_oper under windows 2003 server before installing oracle 10 g 2

  Installing Oracle will automatically create it. You don't need to do it manually.

• Oracle process has many flaws of page on windows 2003 64-bit with 16 GB of RAM

  Hello
  
  We have recently installed a new Oracle RAC database on a customer site:
  
  2 - nodes x SP2 of Windows 2003 R2 Standard x 64
  Oracle 10.2.0.6.0 64-bit
  Each node has 16 GB of RAM
  SGA_TARGET = 1536M
  PGA_AGGREGATE_TARGET = 1628M
  
  
  Navigation via Enterprise Manager, there was a warning on "virtual memory an Excessive paging. So I opened the the Task Manager Windows on one of the nodes, and Yes, I see a considerable number of 'page fault' for the oracle.exe process. To give a slightly better idea, some relevant columns for this process I write values:

  Proc Name     Memory Use      Max Mem Use         Virtual Mem Size       Page Faults
  oracle.exe    2.690.692KB     2.959.324KB         3.053.889KB            2.914.171.009

  And this value for 'page fault' increases 1000-2000 about a second.
  
  There are several other processes running on the server, nothing appears out of the ordinary for me (for example the process of Enterprise Manager, AntiVirus, winlogon.exe). The sum of the memory of these processes are using / used is about 1 GB.
  
  Looking at the "performance" tab in the Task Manager, I see that:

  Total Physical Memory = 16Gb
  Available = 12Gb

  All of this makes sense to me:

  16Gb RAM
  4Gb used by all processes on the server
  12Gb available

  So why do we not see paging for oracle.exe? I guess I'm missing something on what exactly the column 'page errors' told me. Can someone explain what is happening?
  
  
  Kind regards
  ADOS

  See my replies in this thread: use of swap high - 11 g on windows 2003 x 64 file

  Of http://technet.microsoft.com/en-us/library/cc961101.aspx (monitoring and Tuning your server):
  "If a process request a page in memory and the system cannot find the requested location, this is a page fault. (If the page is elsewhere in memory fault is called a soft page fault.) If the page must be retrieved from disk, the fault is called a page fault.) The system also has a page on a file access error if the requested page is not found in the file system Cache and must be retrieved from storage. Counters page fault does not distinguish between hard and soft faults, so you must combine meter information to deduce the number of hard faults.
  To follow the pagination, log the following counters: memoire\ of Page/s, memoire\/s Cache faults defects and memoire\ reading of pages/sec. The first two of them follow the working sets and the file system Cache. Contributes to the counter of page reads you following hard page faults: a high rate of page faults associated with a high rate of page reads (as highlighted in the disk counters) indicates a high rate of hard faults. "

  See also:
  http://msdn.Microsoft.com/en-us/library/cc441804 (vs.85) .aspx (Working Set)
  http://TechNet.Microsoft.com/en-us/library/cc958290.aspx (evaluation of memory and Cache usage)

  In short, a fair session connect or disconnect from the instance of database will increase the number of page faults (soft).

  Charles Hooper
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• CPU is poorly reported in systeminfo under Windows Vista SP2

  My new Intel 990 X Extreme Edition CPU is poorly reported in systeminfo under Windows Vista SP2, how this can be solved?

  Thanks for your replies.

  Problem solved by installing windows 7 64 bit.

• Negative time CPU for service of process on Windows 2003 for 4.0.2 agent

  I have configured the service of process on the Windows 2003 server with the 4.0.2 agent is installed.
  Here's the copy of the metric data view:
  Low tip of Avg
  Use of the UC - 0,4 - 0.01% 0.16%
  
  I have it on all the 8 servers I have configured so far.
  Systems are Dell PowerEdge 1950 and not overclocked.
  No idea what may cause him or how to solve it?

  Hello

  This is a known and documented in bug
  http://JIRA.Hyperic.com/browse/Sigar-129

  If you can't wait until HQ Agent 4.03 (if everything goes well, including SIGAR 1.6.2), you can download the latest libraries SIGAR and pots to try to update your Agents HQ:

  http://svn.Hyperic.org/projects/Sigar/dist/SIGAR_1_6_2/lib/

  HTH,
  Mirko

• Release 11.5.10.2 R12.1.3 on windows 2003

  Hello
  
  We need to upgrade the Applications11.5.10.2 Oracle on Windows 2003 (32-bit) of R12.1.3 Applications Oracle under Windows 2008 (64-bit).
  
  Please let me know the steps of high level for the same thing.
  
  Kind regards
  Narayan

  That would mean pass to R12.1.3 on the same server on Windows 2003 and then migrate to Windows 2008 (64-bit) on the new server according to Note Id 1188535.1.

  Yes.

  Thank you
  Hussein