Ora_dba group is not present in windows 2003

Similar Questions

• Services Bluetooth is not present in Windows XP Professional

  Original title: the integrated Bluetooth Services

  Hi, I use MSWindows XP Professional Version 2002 Service Pack 3 on HP ProBook 6555 b. The machiene has a built-in bluetooth device. In Device Manager I see - Bluetooth devices > Module integrated HP with Bluetooth 2.1 wireless technology. However in respect of services (services.msc) I do not see any Bluetooth support service. So, I am unable to use the bluetooth function. The experts would help? Let me know if additional information is needed. Thank you.

  Hello

  1. it worked before?
  2 have you made changes on the computer before this problem?

  I suggest you follow the Microsoft article reference and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  See also: http://support.microsoft.com/kb/883259

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

• Reconfigured HP Data Replication Group does not present as a group of SRM data store

  Hello

  I configured in two data centers with an EVA4000 on the source site and an EVA4400 on the destination site, countered with Continuous Access EVA of SRM.

  I had replicated two EVA virtual disks (and ESX data warehouses) on the EVA4000 Source called EXCHANGE01 and EXCHANGE02 that have been configured in separate groups, data replication (named EXCHANGE01-GROUP and EXCHANGE02 GROUP) of the HP Command View EVA. These have been picked up properly by SRM as replicated data stores.

  So I decided that it would be preferable to not not two data stores more as a single unit and therefore re-configured continued access by removing the virtual disk EXCHANGE02 of its data replication group and adding as a member of a GROUP named EXCHANGE01. After that, the GROUP named EXCHANGE01 is fail-over for Command View EVA unit and contains EXCHANGE01 to virtual disks and EXCHANGE02. The problem is that when I use the "Rescan replicated storage" option in SRM, you can still see the two Datastores EXCHANGE01 and EXCHANGE02. As it is, I need to create two groups, one by the data store, while in reality a continuous access switch the two as a single unit. The MRS server has been restarted, the berries reread several times, and in fact the EVA4000 has been restarted.

  Two things, I guess. Am I right in thinking that SRM should report to the Group of data replication HP (despite the fact that he refers to it as a\ group data store)? If I am, is there a way I can fix it (preference to short to remove all the replication groups in Command View EVA, a new analysis in the MRS and re - duplicate records?

  I have attached two screenshots - one to SRM showing the list of groups of data store after a new analysis and the other from Command View EVA, showing the Group of data recovery

  AX

  Hi Bob.

  The term SRM data store group is intentionally generic because MRS. support many different providers, and all could use a term "Replication group" as EVA does. If MRS. may correspond to a data store that was created on a LUN that the one being replicated is returned by the adapter, it considers that the store of data as being replicated. It's the storage provider for code adapter for return information LUN appropriate to their table - if you look at the SRM newspapers you will see EVA adapter returns each LUN replicated individually with no information about the relationship of Group of replication at all, so it would be impossible for SRM to have knowledge of this relationship as well.

  Although the LUN in a replication failover as one group power group, they can be taken individually for use during the test of SRM, so maybe it's one of the reasons why HP choice to list each ONE separately.

  In all cases, you have several alternatives: one is to keep your existing environment and configure two groups of protection; on the side of recovery, you can set up a restoration plan unique to switch both of these groups; In addition, you may have configured 2 other recovery plans, one for each protection group, which would be only used for the test, and which would test each LUN and virtual machines on it individually - this could reduce the load on the DR ESX servers during the test rather than to test simultaneously. Of course, you can create a single LUN as well and that of course would make the theoretical discussion - it could be better if your virtual machines must be tested together because the application dependencies.

  You might consider following up with HP if you want more insight as to the relationship of EVA "Replication groups" viz SRM, which is why they chose to not to expose information to the replication group.

• R12.1.1 Fullfillment service does not start in windows 2003 envirinment

  I tried to start the service of realization. It starts and then stops abruptly.
  
  Help, please

  Hello

  Run only AutoConfig, he must recreate the services (remove/create all application services).

  Kind regards
  Hussein

• Not present Pinball in Windows Vista

  Original title - Pinball

  How is it, XP has virtual Pinball but Vista is not?
  

  
  
  
  
  
  
  
  
  
  

  Hi RobinGatdula

   

  Flipper is not present in windows Vista by design instead you will find some new games added to the Windows Vista operating system. You can check the link for more information - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/whats-new-with-Windows-Vista-Games

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-about-Windows-games

   

  I hope this helps.

• Satellite L10-102 drivers windows 2003

  My laptop will not connect to my wireless adsl modem even not wpa or wep password is enabled on windows server 2003.

  Hello

  In my opinion, you should try to establish the connection on how best without passwords or the firewall settings. This device is not supported for Windows 2003 server and it is not possible to find a driver designed by Toshiba.

  In my opinion driver designed for Windows XP Home edition should work too but try to identify what WLAN card is registered and check if you can find a real driver of the site s manufacturer.

  If you are able to see your network, but it can not be connected, check the WLAN settings.

  Good bye

• Windows 2003 Server R2 Enterprise edition SP2

  Dear Microsoft team

  I have Windows 2003 Server R2 Enterprise edition SP2 I want to install the AOL browser on it, it is not compatible but previous version is compatible with windows 2000, Whi I can't install AOL browser in Windows 2003, it is newer than win 2000. I need AOL browser forward and I need this browser in my windows. And could you please tell me why this form that I filled out windows 2003 was not available, I guess that Microsft itself is not compatible with Windows 2003.

  Contact AOL Support or post in this forum for assistance: http://social.technet.microsoft.com/Forums/en/winservergen/threads

  Also, be prepared to explain why you must have the browser installed AOL kos is going to be the first question, they ask you.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of CS5 on Windows 2003 R2

  I am trying to install CS5 on Windows 2003 R2 server.  For Illustrator CS5 and Indesign CS5 said minimum system requirements are not met.  It will not load on Windows 2003?  A 1 GB of ram and a lot of disk space.  A installed SP2.

  Please notify.

  http://prodesigntools.com/products/adobe-cs5-system-requirements.html: win xp sp3 or higher

• HP EVA4400 + ESX 3.5.0 + discs Windows 2003 Raw Device Mapping

  Hi all

  I'm testing a configuration to help:

  • HP EVA 4400

  • ESX 3.5

  • Blade HP c-class

  Verification of compatibility EVA4400 on-site HP Spock, I found this note in the section Notes General Guest OS (1): "(7) Raw Device Mapping is not supported on Windows 2003 Guest Operating System load."

  I would use snapshot EVA (BC) to a Windows 2003 Server (not R2) for backup.

  In the VMware HCL, I have not found confirmation of this note.

  1. does anyone know if the note concerned only W2K3 or same W2K3 R2?

  2. "is there anybody out there" who uses this configuration? EVA4400 is: + W2K3 in ESX 3.5 + RDM + instant. Any problem?

  Thank you very much

  Max

  The restriction was lifted (don't know why he never existed - perhaps no trial):

  Release notes for HP StorageWorks 4400 Enterprise Virtual Array (XCS 09006000)

  Reference number: 5697-7997, second edition: January 2009

  * Configuration of VMware for the raw device mapping details

  RAW Device Mapping only is not supported with Windows 2003 Machine virtual guest operating system and versions prior to version ESX 3.5.0.

• Could not load any Windows OS on ESX 3.5

  Hello world

  I did some research on this one and I downloaded a ton of off-site Vmware site Web of LSI Logic SCSI driver, etc.  Right now, I'm to evaluate ESX 3.5 because I think currently for the virtual office road.  Now, I have installed a machine virtual Red Hat under ESX 3.5 and that works fine except that there is no network activity on the virtual machine itself (it's ok through).  The problem I have is when I try to load Windows (XP or Server 2003), I load the SCSI drivers and it detects the hard drive virtual and everything.  It creates the partition and format, and is preparing to copy files.  This is where the problem comes to the top.  I have read many other people have this same problem.  When he tries to copy the SCSI drivers, he says constantly, "can not copy the file.  I know that the diskette is inserted, I even used the image of diskette for BUSLOGIC which is integrated in the datastore of ESX 3.5.  I can NEVER get pass this point unless I have skip files, that is bad of course, because once it starts to load, I get a blue screen every time.  I saw the response of people saying just try this SCSI driver download and tried a ton.  I'm created flp files using WinImage and everything.  Virtual and real disks can all be corrupt because it does not load the driver in the first place (or so I wouldn't see the disc even perform a partition and format.  Anyone know why I can load but copy never works?  Any help is appreciated and thanks in advance.

  Will be

  XP needs drivers, Windows 2003 does not work.  Windows 2003 will load very well natively (free) in 32 or 64 bit.

  When you say "copy" you mean the virtual floppy drive, and it never get is installed inside the guest?  You do this on a network, or is the *.flp on your local drive and this through the client?  The less network interference the better.  I did it once or twice, but I've never had any problems with XP drivers.   XP must Bus logic function.

  Another thing you could try is to make a NEW ISO with integrated drivers: http://www.nliteos.com/download.html

  This tool will help you do this

• RoboHelp 6 and 7 when used on Windows 2003.

  Hello:
  
  I read that the latest version of RoboHelp (RH7) does not work on Windows 2003. See http://www.adobe.com/products/robohelp/productinfo/systemreqs/ for the purposes of OS of RH7. RH7 is certified for Vista, XP and 2000; but not 2003. Isn't that surprising? Anyone know what are the issues using Windows 2003 and RH7?
  
  Surprisingly, the online help for says-RH6 RH6 is certified on OS Windows 2000 SP4 and later Windows 2003 which means must be supported. In this case, why a later version (RH7) drop support for it?
  
  I ask because we are faced with several problems of performance using RH6 on Windows 2003 (we just upgraded from Windows 2000). It takes a long time to do anything in WebHelp (for RH6). Our project is huge and uses Visual SourceSafe for version control. We had no such problems with RH6 on Windows 2000.
  
  Thank you
  Kutra

  Kutra. Do you mean Windows Server 2003? If so, you may not use RH6 or any other version of a server.

• 6.5.4.2 with windows 2003 version compatibility

  Hello:
  
  6.5.4.2 version server has full compatibility with windows 2003?
  
  I had to upgrade to this version of windows server, but all users would be to stay on windows xp, so the question is on the engine works in windows 2003, don't mind about the add-in excel or esscmd.
  
  Thank you!

  You want the official line

  6.5.4.2 Essbase works with Windows 2003 Server? [589083.1 ID]
  Updated January 21, 2010 Type HOWTO PUBLISHED status

  Applies to:
  Hyperion Essbase - Version: 6.5.4.2.00 - version: 6.5

  Goal
  6.5.4.2 Essbase works with Windows 2003 Server?

  Solution
  Essbase 6.5.4.2 is not supported with Windows 2003.

  It does not work on windows 2003 but I can't tell you if it is 100% without problem if.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• Customization of comments does not not on Windows 2003 SP2 64-bit

  Hello

  I have a server ESX 3.5 with Center Virtual Server 2.5 aned Labmanager 3.0.1.

  I am running 32-bit as 64-bit VM Templates.

  I created packages of Sysprep for 64-bit machines, and each of them works perfectly except for the Windows 2003 SP2 64-bit model. Where the comments customization fails. I tried everything I can think of.

  Trashed the model and built a new, recreated the Sysprep package, updated the SP. But I still get the same error.

  Here is the log file:

  "2010-01-29 00:34:58 execution of command =" C:\Program Files (x 86) \VMware\VMware "-cmd machine.id.get.

  2010-01-29 00:34:58 the command succeeded, output from the command: numnics = 1 & macaddr_0 = 00:50:56:3 has: 01:22 & bootproto_0 = static & ip_0 = 10.88.50.185 & netmask_0 = 255.255.252.0 & gateway_0 = 10.88.48.1 & dns1_0 = 10.88.48.101 & dns2_0 = 10.88.10.55 & suffix_0 = alpha.kaplaninc.com & primaryNic = 0 & computerName = Config1430VM0 & UseSysPrep = Yes & mask bits = 1 & markerid = 109719069 & reconfigToken = 233550085

  2010-01-29 00:34:58 ProductKey = F73XK-QH23X-4FR8C-M98DP-VKQ4Y

  2010-01-29 00:34:58 number of NETWORK cards = 1

  2010-01-29 00:34:58 m_primarynicindex = 0

  2010-01-29 00:34:58 current computer name = WINDOWS2003SP16, new name of the computer = Config1430VM0

  2010-01-29 00:34:58 computer name set to Config1430VM0

  2010-01-29 00:34:59 suffix = current primary DNS, new primary DNS suffix = alpha.kaplaninc.com

  2010-01-29 00:34:59 main setting suffix DNS for alpha.kaplaninc.com

  2010-01-29 00:34:59 checking if marker file C:\WINDOWS\autoconfig-109719069 exists

  2010-01-29 00:34:59 marker file does not exist

  2010-01-29 00:34:59 running command = "C:\Program Files (x 86) \VMware\VMware"-cmd 'info-get guestinfo.vsla.customizationscript '.

  29/01/2010-00:34:59 failed to execute the command, command output value: not found exitcode:1

  2010-01-29 00:34:59 running command = xcopy "sysprep\Win2k3_64'"C:\sysprep"/ S/E/Y

  2010-01-29 00:34:59 the command succeeded, output from the command: sysprep\Win2k3_64\deploy.chm

  sysprep\Win2k3_64\factory.exe

  sysprep\Win2k3_64\readme.txt

  sysprep\Win2k3_64\ref.chm

  sysprep\Win2k3_64\setupcl.exe

  sysprep\Win2k3_64\setupmgr.exe

  sysprep\Win2k3_64\sysprep.exe

  sysprep\Win2k3_64\sysprep.inf

  sysprep\Win2k3_64\wfinf_guide.doc

  9 file (s) copied

  2010-01-29 00:34:59 command = cmd /c copy "Customize - guest.exe" "C:\sysprep\i386\$OEM$" / y

  2010-01-29 00:34:59 command execution failed, result of the order: the system cannot find the path specified.

  0 file (s) copied.

  ExitCode:1

  2010-01-29 00:34:59 cannot copy utility for customizing the comments to C:\sysprep

  2010-01-29 00:34:59 error customize the guest operating system"

  Here, any help would be greatly appreciated I have a quality assurance team to test the 2003 64 bits and at the present time, they are unable to do so because they do not receive an IP address from the scope of the Labmanager.

  Thank you

  Nadine

  You are missing something:

  C:\sysprep\i386\$OEM$

  This file should be present in the directory SYSPREP on the Lab Manager, if not, then something is missing.  I believe that Lab Manager that creates during Setup, but you can do ths following

  First of all, we need to make a folder path that looks like this

  sysprep\Win2k3_64\i386\$ OEM$

  In the oem folder, make a txt file named:

  Cmdlines.txt

  Open the file and just put this in it:

  \[Commands]

  'TAG_RUN_CUSTOMIZATION_EXE '.

  This should replicate to have the correct file:

  C:\Program VMware Lab Manager\Tools\CustomizeGuest\Windows\Sysprep\Win2k3_64\i386\$OEM$\cmdlines.txt

  (Note that your way this may differ on the Lab Manager server)

  Once this is done, you will need to rebuild the sysprep packages before deploying again.

  Note, you will need to each sysprep folder path too.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Windows 2003 x 64 does not start after conversion

  Hi all, I tried everything I can think and not achieved anything so far.

  The problem is I'm trying to convert a physical machine Windows 2003 x 64 Std, a virtual machine. The conversion right, when I go to start the virtual machine, it acts as if no disc is present.

  I tried to do a repair, but either the driver that shipped with Windows does not work, or all the others I could well via google and research forum do not work either. I downloaded the latest driver from LSI and were now sitting in the "Setup starts windows" for more than 40 minutes.

  What should I do to get this working VM? We run VI3.5 U2.

  Thanks for any help yoou can provide...

  We have VMWare Converter Enterprise 3.0.3

  Have you also tried version 4 of the converter?

  You use for your source machine? Or from another machine?

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers