Is possible to do a task under windows 2003 server depends on the performance of a separate task?

Similar Questions

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• DELL PE2950: OS (Windows 2003 Server) install via the DRAC5 card and virtual media

  Hi guys,.

  Reference Dell 2950 with DRAC5 and latest Firmware 1.33

  Installation of Windows 2003 remote server on PE2950 via the connection of DRAC

  CD-ROM connected via virtual Media DRAC or ISO image file.

  Restart the server,

  Server recognizes the media and initialize virtual media.

  Then: Hang on blue Windows Setup screen. This happens within 10 seconds.

  Yet once regardless of whether it is virtual CD ISO image that I use...

  I did the install successfully on DELL PE2850 and DRAC4,

  What could be the problem with PE 2950.

  All the world done this before.

  Please let us know of your experience,

  Thank you

  Alex

  
  

• Not able to hold on to the windows machine Windows 2003 Server 7

  Not able to hold on to the windows machine Windows 2003 Server 7

  I have a small network of windows 2003 server standard and the nodes I have Windows XP and windows7 professional I am able to connet domain controller for windows xp and I am not able to connet by windows7 can u suggest me .or reaseon I am able to ping with both

  There is NO link here for you regarding the pricing of Windows 7, or Windows Server 2003

  TRANSFER your question in the correct Forums.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Try the repost in the Windows Server community at the above address.

  Mick Murphy - Microsoft partner

• installation of Windows 2003 server on machine existing windows7

  IAM planning to install Windows 2003 server OS on the machine having windows7
  I would like to have a dual-boot setup where I can start/start any one of the
  operating system and start work
  Please note that I will not disturb existing OS i.e, windows7
  Please suggest...

  Assuming you want to install Windows Server 2003 on an empty hard disk or a partition:

  You can start the installation from the installation of Windows Server 2003 to start media. When you are done, follow the steps in this article to repair the boot sector: Windows startup is no longer after you install an earlier version of the operating system in a dual-boot configuration

  For additional tips for Windows Server, please post in Forum Windows Server.  Thank you!

  Carey Frisch

• We can make print under Windows 7 server in a domain, or if it must be a server operating system only.

  We can make print under Windows 7 server in a domain, or if it must be a server operating system only.

  I wanted to say that I want to install the print server, so I can install it on Windows 7 it is necessary a server operating system only, (it's in a field)
  I would like to know if it's a domain model can use us it or if it is a model of group work can we use Windows 7 or Windows Server OS?

  Hi Zahed,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• install ESXi on an existing machine under windows 2003

  Hi all

  I'm new to VMware and I just installed ESXi on a machine with server 2003 installed. My questions are:

  1: can I still access my windows 2003 server, bypassing the connection of ESXi? If so, how? If not, it means that after I had installed ESXi on this machine, Server 2003 is removed.

  2: How do I reinstall the ESXi on this machine?

  I converted two of my physical servers into virtual machines using the converter. And my questions are:

  1: after you import the virtual machine, I deleted it from the VMware client. This particular virtual machine is no longer visible but still displays taking up resources such as HDD, CPU, RAM etc. How to release my resources?

  2:i have two network cards in the physical server, and when I've converted and brought it into a VMware customer, everything is ok except the network cards. They show that some cards AMD NIC. I'm not able to use network cards. And I already tried to convert twice i just cases that something went wrong with conversion. but the problem remains.

  Thank you.

  AG

  As the other poster mentioned, (ESXi and ESX) are installed bare metal - they install their operating systems, so I think your Win2k3 installation is missing if you have it installed on the same disk.

  When you removed the VM you remove disk or delete forminventory - if you have removed the inventory and it was running, it will still resources - for the correction of network cards virtual you need to install VMware tools - this will load the appropriate virtual machine drivers and it will improve your performance - up to this virtual material of your virtual machine will be identified as a physical hardware as the AMD PCnet Ethernet controller-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Windows 2003 - server problem

  When I try to connect my windows 2003 Server service, it gives below error:

  12029 - unknown error.

  On the internet I can find that 12029 - could not establish a connection to the server.

  Legacy code is written in VB6.

  Code:

  objXmlHttp.open "POST", modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "WSURL"), False
  objXmlHttp.setRequestHeader "Content-Type", "application/x-www-formulaires-urlencoded.
  objXmlHttp.setRequestHeader 'Permission', modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "Release")
  mfurlxml = "SERVICE = VALIDATE & DATA =" & URLEncode (objDom.xml)
  "objXmlHttp.send"FUNCTION = VALIDATE & DATA ="& URLEncode (objDom.xml)
  objXmlHttp.send (mfurlxml)

  I tried all ways below to make it work. Yet my request does not reach the server. Can someone help me please?

  1 has changed the default Web site to use IP addresses (all unassigned)

  2. clear firewall problem

  3. not controlled all three boxes under Internet options-> connections-> lan settings

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot delete a file locked on a Windows 2003 Server

  Try to delete a file on a Windows 2003 server, but it shows "it is used by another user or program.
  Try searching for the user who opens the file but nothing found under computer management | Shared folders | Open the files.
  Able to locate the file opened using OpenedFilesView freeware but not able to release the file using the utility.

  No idea how I can remove the open/locked files?

  Thanks in advance.

  Hello HKLPG,.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Windows 2003: Newspapers erased during the update of windows

  Hi all

  is it possible that during an update of windows, newspapers evt files becomes permitted by the system?
  On a Windows 2003 server, I get a message in the security log, saying that the user SYSTEM
  has authorized the security log. The timestamp coincides with a windows update
  session where the following updates have been installed:

  WindowsServer2003-KB2416451
  ndp20sp2-kb2418241
  ndp35sp1-kb2416473

  Is this normal?

  Thanks in advance!

  Hi Dee44,

  The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 2003 server lost the connection with clients for a few seconds

  Anyone know why Windows 2003 Server cut myself with clients (XP loaded to the PC) and reconnects automatically in 1-15 seconds? It happends 2 - 5 times a week. If I restart the server, it won't be for the next 2 weeks. No errors in the event viewer.

  Already tried to do the following problem and always exists

  1. Anti Virus (Symantec) disabled
  2. Connection has changed to a different network port
  3. Ping t (no offline client)
  4. Windows Update

  Total number of 25 users. 30 under license.

  Help, please.

  Thank you and best regards,

  Santini

  Eugenie,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Windows Server in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virtualization of a physical Windows 2003 Server Standard live by Ethernet

  I intend to virtualize a Windows Server 2003 server standard of Ethernet based field.

  I am currently using the VMware Workstation 10.0.1 and I noticed/hear about the possibility of using "Virtualize a physical machine" to create a testmachine identical to one of my physical servers to clients.

  The physical server is running on a network domain, and it is quite critical.

  Can confirm them, it is possible to virtualize a Windows 2003 Server?

  Is it not possible to virtualize the server for example, live by Ethernet, without disturbing it?

  Best regards, Reynir

  Your physical Windows Server 2003 machine is a domain controller or a member server standalone field?

  If your server is not a domain controller, you can do a P2V from this machine without stops services, but there are always recommend stop all non Microsoft and no VMware services before starting the conversion, just to be course, there is any alteration of the data and other services like antivirus train killing the process of converter.

  For P2V recommended, please visit: KB VMware: best practices for using and troubleshooting VMware Converter

  And for the video tutorial of the P2V with VMware: VMware KB: convert a physical machine to the Fusion, Workstation or Player using stand-alone converter

• P2v Windows 2003 Server

  I have a Windows 2003 Server physical that we would like P2v, but drive C has only about 100 MB remaining.  Drive D has 25 GB.    My preference is to install Converster on this server and run locally, but as the C drive is low on space, it may be better to do it remotely.   However, I was wondering if there is a way to always run locally if I install the converter on the D drive.  Is this possible?

  With only 100 MB on the left, I highly recommend you free disk space before you do anything else to avoid problems (not only related to the converter). What I did in the past in such situations, is to configure the location of the page file to the server, which will release usually a few GB (depending on its current size).

  André

• Windows 2003 R2 + GParted = / = increased the boot partition

  Hello

  I am trying to increase my partition to boot under Windows 2003 R2. I have added space for the vmdk, ran GParted and extended with success the C: partition. When I start the machine the C: reports the old smaller value. I ran the check disk and ran fixmbr, but the problem is not resolved. I've attached a picture showing the problem circled in red.

  Thank you.

  I saw this happen once or twice now. It seems that the end partition information are not defined correctly in the gparted partition table in some cases. Usually a resize another (minor) will fix the problem.

  André

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.