Material such as a monitor or a printer can be infected by malware?

I was wondering just if material such as a monitor or a printer may be infected with malware if they were connected to a computer that has become infected?

Thank you.

No, he can't, at least not with the current breed of viruses. The hardware device should be mounted factory infected firmware which is currently under discussion as a potential future threat.

Tags: Windows

Similar Questions

  • A laser printer can be plugged into a power strip?

    A laser printer can be plugged into a power strip?

    Here's the question.

    A typical wall outlet is rated at 15 watts max, but you should only put about 80 percent of this amount on the circuit as a constant pull then 12-13 watts is the actual amount of the charge, you will place it on one shot. You might get an occasional brief increased load when a device such as a printer laser heated.

    Laser printers pull a lot of power when the fuser unit, heating, so you should gave them a plug dedicated to the extent possible.

    If you put a printer into a power strip, then the band must be plugged into a wall outlet and the printer should be the only thing plugged into the power strip.

    End check model of your laser printer and find the data sheet and see how much current it draws pulling maximum amount, if it is 12 or 13 amp, then you really should have a dedicated socket or a power strip plugged into the Jack with nothing else on this subject.

    If my post resolve your issue please click the accepted solution inder button it. Thsnk a tech for a post click the thumbs up button under the post. You can even click on the two buttons...

  • My usb port on my monitor is low how can I activate it

    My usb port on my monitor is low how can I activate it

    Hello

    I would check the cable first, but what is your machine and its monitor? One of my monitors has a separate cable that come with the monitor for these 2 ports, 2 USB ports on the left hand side.

    Kind regards.

  • HP4215 printer can be used without phone connection if want to print, scan or copy

    Have a HP4215 printer that has not been used for a few years. Keep allow the family member, who use only a cell phone, and an old Apple laptop for 1 year, to be able to use it to print, scan and copy only - no fax.  If it downloads the driver, and hooks the USB, the printer can be used without a line of phone being installed?

    Hello

    Yes, given the portable computer Apple has USB ports, you can connect your printer to the laptop via a USB port, but you will not be able to print from cell phone. If you want to print anything from cell phone, the quick and easy way: send or copy on the laptop from Apple to print.

    Kind regards.

  • My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?

    My HP Photosmart Premium is saying "preparing the printer can not be interrupted.  Please wait... "What is happening?

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-premium-error-message/TD-p/1470957

    HP support

    Edit:

    I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.

    I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge).  I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely.  This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges.  She also told me that there is a paper jam, even when there is no paper in the machine.  I even let the maintenance run all night without success.

    Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.

    above compositions of this thread:

    http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/HP-OfficeJet-Pro-8500A-plus-printer-is-stuck-in-maintenance-mode/TD-p/1207907

  • How can I change the SSID for my C4780 printer can find my wireless phone?

    I changed routers and got a new SSID.  Now I can't change it so the printer can find it.

    The best way to do this on a Mac would be to uninstall the printer completely and reinstall it with the CD or downloaded at HP software.

    Make sure you start by unplugging the USB cable.

    During installation, you can choose the option network and connect the USB cable when prompted.  Follow the prompts and it should get reconnected to the network.

    Here is a document from HP that details how to install this printer on a network.

    There may be other ways, but the lack of a configuration wizard wireless (due to the feature of the screen), makes the limited options.

  • When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

    Original title: memory card Problemz

    When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

    Here's a way to accomplish the task...

    Apparently, you have an external or internal USB media player?

    Insert the memory card into the correct location on the media player...
    If open windows... Close them.

    When the card is inserted... If you go to... Start / computer... is
    player card on one or several removable disks?

    Removable (e :)) drive
    Removable disk (e :))
    Removable drive (g)

    If_Yes_you can download the files from here. Left click
    the drive letter that corresponds to the SD card slot should
    display the directory of the card and you can copy and paste or
    Drag and drop the files of your choice in a folder on your hard drive
    drive.

    Just click with the right button on a group of selected files and choose... Copy...
    then navigate to the folder that you want, and then right-click the
    folder and choose Paste.

  • 8600 HP all-in-one more: 8600 wireless printer can accept dynamic address of the cable mode, / router?

    Got new Suddenlink cable modem/wireless router that uses dynamic addresses - only but the 8600 all-in-one printer uses static-how to to get wireless printing? The printer can be reconfigured to accept dynamic? How?

    Thank you

    Yes, it can, information in your printer manual. You can reset the network for DHCP settings. In addition, your router supports IP static. You just need to configure it. Info is in the router manual or call them.

  • My HP Photosmart C309a printer can't find the router wireless 3 feet above him.

    My HP Photosmart C309a printer can't find the router wireless 3 feet above him.  I ran the diagnostics and got the message "the wireless radio does not work.  This device is the wireless radio?  In the router? In the printer?  I have reset the router is #6 with the printer, but I am still unable to connect my Macbook to the printer wirelessly.  My desktop Mac is connected to the printer with a cable and print well.  Is my router messed or my printer?

    Wireless radio of your printer (that it uses to communicate with the router radio) died.  Here's how to contact HP technical support: www.hp.com/go/totalcare

  • dleecom.exe has been removed and know my computer and the printer can not communcate between them, what I can do

    in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine

    Flight23,

    Run first remove print jobs to remove all blocked the queue print jobs.

    Unplug your printer,

    Start, Panel, programs and features, your printer, uninstall.

    Restart your computer.

    Make sure that the printer has been deleted. Driver Manual printer removal

    With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

    Don't forget the programs anti-virus and firewall will block communications.

    Rick

  • Error found: iP1600 printer can be connected to the network

    Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

    Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

    I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

    Hello

    I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
    Hope this information helps.
  • my hp color laserjet 3500 printer can work with cloud services

    my hp color laserjet 3500 printer can work with cloud services

    The printer listed does not support cloud services.

    Printers supported by cloud Services

  • In Illustrator, how do I save a design that I made in an earlier format of Illustrator so my printer can open it to an end? It is not as up-to-date as me.

    In Illustrator, how to save a design that I made in an earlier format of Illustrator so my printer can open it?

    Thank you, Sammy

    Click file > save as and choose the oldest format available.

  • By default the monitors of the printer in the registry missing__

    I have problems with a printer/scanner.  Then, I started to follow all the procedures in your forum on the problems of printer and usb.  I came to the procedure which you enter in the registry underHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors

    the subkeys for the default printer monitors are missing.  How can I restore them?  Not having is not the default printer monitors will prevent from appearing in the box printer/Fax printer?

    The spooler starts very well.  I have WinXP SP3 on my pc. Anti-virus software McAfee with automatic updates of cox.  AMD athlon 2000 + 1.66 ghz, 80 g HD, 2 GB of ram.

    What is a thread?

    Here is the part of the info I'm talking that I copied from one of the forum questions answered, below.

    When you click Start and then click Printers and faxes to try to view your printers, no printers appear. This problem may occur even if you have a printer installed.

    Thirdly, remove the registry entries for the default print monitors

    Remove the print monitor subkeys can be problematic, which can interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Follow these steps to keep the print monitors and comes with Windows registry entries and remove all others who may ask questions.

    Start the registry editor if it is not open. To do this, click Start, click Run, type regedit in the Open box, and then click OK.

    Search for, and then expand the following registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\MonitorsView the list of subkeys. It should only be the following subkeys for the default print monitors:

    ·       BJ language monitor

    ·       The local port

    ·       PJL language monitor

    ·       Standard TCP/IP port

    ·       USB Monitor

    If there are any subkeys other than the subkeys listed in step 1, do the following:

    On the file menu, click Export.

    In the file name box, type the name you want to use for this key, such as MonitorsRegkey and then click Save.

    When I looked in the registry, under regedit.exe, monitors default printer in bold above weren't there.  How can I restore them?

    I just wanted to say thank you very much!  That was the problem with my printer does not.  Once I loaded the info above in the registry and restarted the system, my printer has appeared in the box printer/fax and I was able to print a test page.

    Thanks for your help!

    amber6

  • My printer can print documents online such as emails and boarding of IE but not Firefox

    My printer has no problem printing Word, PDF and other hard drive, the documents offline, but using Firefox can't print documents such as e-mails and boarding passes online. It doesn't have this problem with IE. I use Windows 7 and a multifunctional device (print, copy, scan, fax) brother. Thanks for any help.

    Can be a little specific on the problem?
    What problem you encounter when you want to print. What happens when you use the print command?

    Is the Prinat popup dialog box when you click CTRL + P on any page?

Maybe you are looking for

  • 3rd generation ipod white screen

    I know it's old, but working well... so far.  White screen.  It is recognized by itunes when plugged into the computer.  Restored successfully on the itunes screen, always white.  Tried the fix with holding home and power button.  Tried to hold the H

  • Cannot delete Apps blocked pending-

    iPhone 6 sec more iOS version: 9.3.3 (G 13, 34) Edition: 3rd apps are blocked on 'waiting', since the time those who started the update a week ago photo - grid Photo - collage maker, Google Maps & Documents 5. Remove the phone crashes. They do not ap

  • shock wave does not work

    I'm on windows and whenever I connect to facebook an error message appears saying that shockwave has problems.Can you help me solve this problem?Thank you very much for your help!Best wishesJohn Cantu Edit: removed personal information for your prote

  • problems connecting a BEFW11S4 to a netopia dsl modem

    Hello I'm trying to connect my router BEFW11S4 to a netopia dsl modem via an ethernet cable.  The router doesn't seem to be able to get an IP from the modem.  The modem log shows not even attempting the router of ideas for what to try? I want just to

  • Server Dell Poweredge 2950 break [GRO] disco

    Buonasera, abbiamo UN Server come in oggetto, tell UN disco o nn adapter rotto. Come we can turned out assistenza e preventivo? This extremely UN tecnico. Grazie Rimaniamo in attesa di riscontro VS