Materials for workstation boards

Similar Questions

• Serial port PCI and PCI Simple Communications controller for workstation Z200 drivers.

  In the Device Manager Windows XP, (in other devices) PCI serial both the simple PCI controller are yellow/exclaimation marks.

  Help, please

  Thanks to all good.

  P.S. this thread was moved from the business PCs - Compaq, Elite, Pro for workstations - z series, series xw and legacy x series w - moderator of the Hp Forum

  Hello:

  Plase see if this driver installs these devices.

  It should install the PCI serial port device.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=4100568&prodNameId=4100644&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=wk-104237-1

  If it does not install the simple comms PCI controller, see if this driver installs only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=VC-87672-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=3688868

• Licience for Workstation 9

  When I passed the VCP 5 test I got a licience to workstation 8.  When I turned on my computer today, he invites me to upgrade to Workstation 9.

  Is this my works licience for Workstation 9 or is it 8 specific workstations?

  Thanks for the information and have a good long weekend (day of work on Monday to the United States),

  Anthony.

  License keys only work for a specific version, and I don't think that the free license can be improved. However, you can try to see if the license shows also extensible in your My VMware account.

  André

• no connection available for: oracle.webcenter.collab.share.NotFoundException Discussion Board: no connection available for: Discussion Board

  Hi all

  I asked of webcenter spaces. We do not always use we get this error in the log as below - where I can disable this call for discussion forum discussion forum. Please suggest.

  < oracle.webcenter.collab.announcement.view.backing.AnnouncementUtil > < WCS-04014 > < no connection available for: Discussion Board oracle.webcenter.collab.share.NotFoundException: no connection available for: Discussion Board  

  at oracle.webcenter.collab.share.SessionFactoryUtils.lookupConnectionNames(SessionFactoryUtils.java:121)      

  at oracle.webcenter.collab.share.SessionFactoryUtils.findDefaultConnection(SessionFactoryUtils.java:172)

  at oracle.webcenter.collab.announcement.view.backing.AnnouncementUtil.doExtAppCheck(AnnouncementUtil.java:196)       

  at oracle.webcenter.collab.announcement.view.backing.AnnouncementActionHandler.doInitializeMiniView(AnnouncementActionHandler.java:139)      

  at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)       

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)       

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)       

  at java.lang.reflect.Method.invoke(Method.java:597)       

  at com.sun.el.parser.AstValue.invoke(Unknown Source)      

  at com.sun.el.MethodExpressionImpl.invoke (unknown Source)

  I'll try tom and let you know that...

• Merger of converter for workstation or ESX

  Hello!

  Is it possible to do a Fusion converter for workstation or ESX?

  Anyone know of any option or howto?

  Thank you.

  When you create the virtual machine in workstation, you just place the vmdk file in the virtual machine folder and point to it (use an existing hard disk) disk.

  I'm trying to move the entire folder from mac to windows in order to verify if the virtual machine still works or not, but I think the .vmx file mac file must be different from the .vmx file in windows, because they use different types of partion, disk, system files and files speaking.

  Yes, you can use the converter to convert your VM workstation or Fusion to the ESX format. (see this link)

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'Useful', thank you! =-

  MCTS, VCP

• DLNA is a beautiful feuture for Bulletin Board

  A nice feature for the Bulletin Board would be shared on a dlna renderer.

  Windows 7 can send multimedia off the exporer ("play to") to a renderer dlna (such as TV).

  The Bulletin Board is missing this option.

  I imagine something like dlna sharing on a Tablet S.

  Beautiful thoughts. It will be nice that Toshiba software engineers reading this forum. ;)

• Windows 7 drivers for workstation mobile hp nw9440

  The hp nw9440 mobile workstation is compatible with windows 7 32-bit and 64-bit windows 7? If so were if you can find the drivers?

  Hello:

  The mobile workstation nw9440 is not supported by HP for Windows 7.

  What I would do, is to connect to the internet after installing W7 and launch Windows Update utility. Who will download some W7 drivers for your laptop.

  For any still missing, use the Vista Business 32 or 64 bit drivers, according to the case.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839862&lang=en&cc=us&TaskID=135&prodSeriesId=1839859&prodTypeId=321957

  If you can't find a driver for something, please post back and I'll try to help you.

  Your laptop should be able to run W7, even if it is not "officially" supported by HP to make.

  Paul

• UPS for workstation hp z 840

  Hi guys,.

  We bought a new z840 and z 640 hp workstation. right now we are little confused about buying a UPS for my computer. the people where we bought the workstation suggest buying UPS apc.

  they give us the option to 3 ups

  1. APC 1500-980 watts
  2. APC 1300 - 2000 watt
  3. APC-1980 2200 watt

  According to the product page of the hp z840 have a diet 1125 watt and z640 925 watts required Power suply. Anyone have any suggestions?. We will use two monitor for each workstation that consumes 20 watts per each (27 inch led screens). can I use the apc 2200 for two or more workstations? any help?

  I would be more than enough for two workstations with monitors the APC 2200.  I use a much smaller for my computer and the monitor with no ill effects.  Just be aware that if the power goes off and no one is around to shut down computers, etc. that the INVERTER will be only last a while, then the computers need to be stopped.  Using the PowerChute Software will stop the computers in a predefined time assuming that the software is configured correctly.

• Activation failed for controller board B200 M4 7.0 with UCS Mini 3.0 firmware (2 c)

  The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c).  Once associated with a Service profile, the firmware controller board 7.0 activation fails.  The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware.  I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0.  Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots.  Reacknowledging the blades does not change the result.  Any ideas?

  Michael,

  You did the right thing by adding the 2.2.5a firmware.

  Were you running CLI activation?

  #scope Server X / Y (blade chassis X Y)
  # scope boardcontroller
  # Display image (this will list all versions of firmware)
  # enable force version.0 firmware (Select a version lower than that already running)
  buffer validation #.

  If the foregoing is successful then reset MMIC

  Try--->

  In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.

  Kind regards

  Saurabh

• BSOD after conversion to Amazon EC2 instance for workstation 8

  I have an existing instance of Windows 2008 R2 in Amazon EC2, which I am trying to convert to VMware Workstation so I can use it to test scenarios.  I followed the steps listed in the following article and was able to correctly convert the instance in a virtual machine in VMware Workstation 8.0.5:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1018015

  The problem I'm having is that when I turn the virtual computer I get a BSOD during the boot sequence (see attached screenshot).  I saw a fix from Microsoft for BSOD caused by storport.sys, however, this patch describes a problem that occurs gradually over a period of time due to a leak of memory, which doesn't seem like the same problem I am experiencing.  I think it has something to do with a mismatch of disk controller drivers.  How can I solve this problem?

  

  You need to access somehow on the target disks. You can use VMware Workstation to mount the VMDK target or you can temporarily attach the drive containing the Windows directory to an another Windows VM (in this case, you must open disk management and select command analyze disks in the Actions menu and the new virtual disk from VM Amazon converted should become visible). After that:

  * run regedit on this machine

  * Select the HKLM hive

  * on the file menu, select "Load hive" command

  * Go to the hive of the registry SYSTEM target (under WINDOWS\system32\config\system * on the target disk * that was attached to the virtual machine, but * No * the directory of Windows running)

  * Choose a name for the new key (e. g. ec2-system)

  * Go to ec2-system\ControlSet001\Services

  * Search for the three drivers and delete the keys of any

  * then again select the ec2-system under HKLM key

  * on the file menu, select the command "Unload hive" and close Regedit

  * Remove the VMDK mounted or detach the virtual disk target virtual machine "temporary".

  Turn on the converted virtual computer

  HTH

• Where is the configuration information for Workstation 6.5 / Linux kept?

  I make a partial backup of the box of Ubuntu that I have running Workstation 6.5, and I want to be sure, I'm saving all my VMware settings. / etc/VMware has some stuff, but he's not all that. For example, if I change the Favorites list, none of the files in/etc/vmware change. Where is the configuration stored?

  hostwide config: / etc/vmware/config

  configuration of the user: /home/user/.vmware/preferences

  Configuration of the VM: vmx file

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...

• Disable State of dashboard LED materials, for example, 4431 USB or USB-6259.

  Hello, I am marching light sensitive measures with my DAQ hardware. During the development of the program the lights have been useful to show the device is busy, ready etc. But now I want to have a dark perfect during the measurements. For the moment, I use the black tape on the LED Ribbon. Is it possible to switch these lights power button programmatically?

  These LEDs are not controllable by the user. Your use of black tape is the solution.

• Configuration of two materials for a software

  Hello

  We worked with two vehicles controlled by Labview 2011. Each vehicle has an equipped that nor-9188 cDAQ of a module of digital I/o and a thermocouple module. We have appointed the first chassi to 'Vehicle' and "MotorControl" and "Thermocouple" max modules. Then we created a software that allows to control the vehicle, everything works fine on a chassi.

  However, when connecting to the chassi 2 Max we get the problem that the chassi cannot rename the same name as the chassi, same if chassi 1 is not connected. We can also not change the names of module in chassi 2 because that name already exists in the chassi 1.

  How can we solve this problem? It must be pretty common that there are multiple identical devices that must be controlled by a single software. Basically, it is not good to my knowledge pretty good know. : mansad: could you please advice me?

  Kind regards

  Mattias

  Names of DAQmx device for all devices in the system (including disconnected devices) must be unique.

  Solve you this problem by giving all distinct names: for example, the first may be 'Vehicle 1' / ' MotorControl 1 "/" Thermocouple 1 "and the second can be" vehicle 2 "/" MotorControl 2 "/"Thermocouple 2"." "" ""»

  There are two ways that you could deal with this in the software. If you go with the above, for example, you can simply add the number at the end of the device name prefix, as follows:

  Another strategy would be to put all device names in a cluster (so you can spend all your information around like a group configuration).

• Compaq 15-003: external support for Compaqw boards

  Hello

  I have a laptop above and want to perform simulations of railway signals on it. However, they run very slowly and I took it with the suppliers and, after checking all the details of my Notenboom, they came to the conclusion that it was likely to be reduced in the absence of a full media jury.

  That being the case is possible to have an external that could solve this problem and, if so, what type would be recommended. I have to b honest and say that I have no technical knowledge, plain English would be appreciated.

  Thank you very much.

  Davanuk

  davanuk wrote:

  Hello

  I have a laptop above and want to perform simulations of railway signals on it. However, they run very slowly and I took it with the suppliers and, after checking all the details of my Notenboom, they came to the conclusion that it was likely to be reduced in the absence of a full media jury.

  That being the case is possible to have an external that could solve this problem and, if so, what type would be recommended. I have to b honest and say that I have no technical knowledge, plain English would be appreciated.

  Thank you very much.

  Davanuk

  That your request may be. The amount of your application workload should be operational in a desktop/Tower system that can handle the heavy task and tasks required of what you do. Otherwise you're going to spend a lot on a very expensive laptop that has a media dedicate system integrated in the Council and that could respond what should you are looking for. Your daily tasks of the laptop of mill are to use no general pupose to dedicate the work must unless you get a business class or the gaming laptop that has spend material sounds on that but those are expensive systems.