Matter of installing drivers and the device.

Similar Questions

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• now, I have no audio device, tried to download the realtek drivers but failed: class installer has refused the request to install or update the device?

  Original title: the class installer has refused the request to install or update the device?

  now I don't have a device audio, reinstalled windows xp with recovery disk, tried to download the realtek drivers but failed.

  Hello

  1. What is the status of the sound card in Device Manager?

  The following article might be useful: no sound in Windows

• Problems installing drivers after the replacement of Win Xp Home Ed by Win Xp pro.

  Need help.
  I have a Toshiba Satellite M70 - SR2 (bought last December), which came with Win Xp Home Ed pre-installed on it. I remove the home Ed and installed my XP pro Spk2. Now I can't get my wireless connection to communicate with my Linsys router so I can connect to internet, that failed to install the video card...
  I only managed to download and install the audio drivers and the modem drivers.
  I have downloaded the display drivers, unzipped the file but could not install them as I did with the audio drivers.
  In my device manager, I always get a yellow marke in front of:
  Controller - Eternet
  SM Bus controller-
  -Video control (VGA Compatible)
  Can someone gives instructions on how to obtain and install these drivers or where I can find the instructions.

  Thankx

  Hello

  Well, the right installation order is very important because some drivers and utilities can be installed without the other drivers.
  I recommend to follow the installation instructions and install things together.
  If you don't need something then you can remove the bone in Add & Remove software.

  To solve the problem of yellow question mark that you have to install the drivers.
  (At the beginning) chipset driver, Lan/Wlan driver, display driver.

  But if you follow the installation instructions you shouldn't t get any yellow points mark.

  Concerning

• I can not find bluetooth icon and the device on my laptop

  I can't find bluetooth icon and the device on my laptop - HP550 - Windows XP, so not able to connect all devices.
  Even I checked the Bluetooth Services on my PC by method "services.msc", but I can't find bluetooth written on the list.

  Please help me because I want to transfer files via bluetooth.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2. you get any error message?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

  Follow these recommended steps and after if you still experience the problem.

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• I can't find the drivers for the device of 'other '.

  I can't find the drivers for the device of 'other '.

  There are 3 basic system features that are all to even show a yellow '! ' in Device Manager.

  1.

  Location: Bus PCI 21, device 0, function 4

  PCI VEN_1180 & DEV_0592 & SUBSYS_20CA17AA & REV_11\4 & 3B3A03B5 & 0 & 04F0

  2.

  Location: Bus PCI 21, device 0, function 3

  PCI VEN_1180 & DEV_0843 & SUBSYS_20C917AA & REV_11\4 & 3B3A03B5 & 0 & 03F0

  3.

  Location: Bus PCI 21, device 0, function 5

  PCI VEN_1180 & DEV_0852 & SUBSYS_20CB17AA & REV_11\4 & 3B3A03B5 & 0 & 05F0

  Please help me to fig on which driver should I install to solve this problem.

  Sincerity,

  Thank you very much

  T61p: 6459CTO T9300, NVidia Quadro FX570M - 256 MB op GL, 15.4 "WSXGA + TFT, 160 GB 7200 RPM HDD, 2 GB of RAM, Windows XP Pro

  Thank you very much

  Finally, I have foound they're driver for Ricoh 4-in-1 card reader

  First time I think it wasn't this card because I bought the card reader chip, so I don't think on this driver for the card.

  in any case thank you

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  any help appreciated

  Original title: error code 0 x 80246007

  Hello

  Please try the patches for Windows Updates:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  And for store related issues, use Troubleshooting Windows App tool:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Hope this helps, good luck :)

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Insuffecient privileges to install the drivers from the Device Manager.

  Windows XP Pro SP3

  "You don't have sufficient privileges to security to unistall devices or to change device properties or device drivers. Please contact your site administrator, or logout and log in again as an administrator and try again. "
  

  This message appears for me when I try to install a driver Ethernet from the Device Manager, even if I am connected from the only available on my user accounts Admin!
  

  I tried re-formatting of windows, but does not choose the CD drive niether shows the start menu when I start the machine.

  any suggestions please?
  

  or any other required information?

  Thank you very much.

  It's part of the problem that I do not in the BIOS, I know that many make the CD/DVD of my first startup. I just can't make the first boot from it! What about the second problem which I can't make changes in Device Manager.

  Thanks for your reply.

  Using a portable OEM version or office? They have total control over your system? You can only use it for the calculation of daily life.

  If you can not enter the BIOS so no way to change the boot device priority.

  Better, you contact the OEM.

  How are therefore continue on you can't get into the BIOS? Have you tried several times by pressing "Del" or the "F2" key during startup (when the first time OEM or any screen logo into your monitor after restart or reboot)?

  S.Chatterjee

• Speakers do not work error: device not installed Base and the data Interface system / no driver found

  I have a Dell Inspiron 1420 and recently upgraded to Windows 7. It had Windows Vista before. Now my speakers do not play, and they did it when I am running Vista. I did some troubleshooting and got messages from Interface to data and not installed for Base system device, but when I click on apply this patch, I get the message no driver found.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Add Hardware Wizard asking to install drivers for the keyboard and mouse.

  Original title: Assistant material is locking up my computer...

  Assistant adding hardware asks me to install the drivers for the keyboard and mouse however, it locks the computer and I can't type or click on anything whatsoever.  If I go into the set-up menu to reboot, the keyboard works fine.  How can I stop this from happening?

  I was able to run an analysis of the system through the establishment and who has solved the problem of mouse enough to do what else to do to solve the problem.

  Thank you for your reply and your help.

• Satellite Pro A120: Need all drivers and the easyguard for Win 7

  Hello!

  I have a Toshiba Satellite Pro A120, that I bought in 2007 and I am very satisfied.
  It had Windows Vista professional, but I have recently installed Windows 7 and it is where my dilemmas has started.

  My touchpad is not working properly, its scrolling feature works, to be specified. I installed the latest driver for ALPS touch pad, but the problem remains.

  Then, when I checked the system, I noticed two devices listed and it says that there are no drivers installed for them. I can't know what devices are and where to find the drivers.
  They are here:
  1st: ACPI\TOS6208\2 & DABA3FF & 1 driver not installed!
  2nd: ACPI\TOS620A\2 & DABA3FF & 1 driver not installed!

  And my third problem is about the sets of Toshiba programs and public services.
  My laptop came with Toshiba Easyguard, with protection against theft and other programs of Toshiba, and now I've lost all. Is there a way I can get them?

  I must say that I have no intention to return in Windows Vista, if any help would be appreciated.

  Thank you all for your responses and help!

  Hello

  In my IMHO the additional features of touchpad and other devices don't work correctly because the installed drivers are not designed for Win 7 and are perhaps not fully compatible with Win 7.

  Who knows if drivers Win 7 would come out for series Sat A120 we will see
  At that time I didn t find Win 7 drivers specific for A120.

  But if there are some beta Windows 7 drivers on the US page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Maybe you are lucky and some drivers running on your A120.

• Need Vista drivers for the device of storage on the Satellite P100 - 10 p

  Laptop came with Vista Home Premium, updated for the company. Display driver did not managed to solve, but have still 2 points of mark yellow, namely:
  Mass storage device and unknown device - ideas?

  Have you checked the drivers Toshiba site but not sure as what to download.

  Hello

  Did you download the right drivers for the right series of notebook?
  Satellite P100 - 10 p belongs to the PSPAGE series.

  I think you should double-check the Toshiba forum page and be sure that you have downloaded and installed all the drivers available at 100%!

  I think you should check if you have also installed the Texas Instruments Flash Media driver.

  Last but not least the installation instruction has been placed on the page.
  If please follow the guidelines and install the drivers in the right installation order!

  concerning