Max does not add peripheral cp2102

Similar Questions

• MAX does not see COM1 but is VISA. Unable to communicate

  I have a service monitor that accepts the TCL commands in Hyperterminal (via RS232/serial). I want to use LabVIEW to send these same commands. MAX does not list COM1 as device available, although he rises to the VISA as possible a choice. For some reason, I can't monitor service to accept orders when I go through LabVIEW and VISA. Yes, I made sure the configuration set in LabVIEW corresponds to what is on the monitor. It depends in MAX not being able to identify the resource COM1? Any ideas on how to solve this problem?

  Hi enewburn,

  If the COM port does not appear in MAX, then there may be a problem with the serial port itself or the VISA driver.  Please, check the following:

  1. in the Device Manager, make sure that the serial port is present and there is no exclamations.

  2 fix the driver for VISA to ensure that nothing is corrupted.  If opossible, use theni website link: http://joule.ni.com/nidu/cds/view/p/id/1370/lang/en

  Let me know if this changes behavior!

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.

• Win Anytime Upgrade to Windows 7 Ultimate Home Prem key and it does not add text prediction in on-screen keyboard

  I used my Windows 7 Ultimate on Windows Anytime Upgrade key on my Home Premium and it does not add text prediction in on-screen keyboard... Can I fix?

  I haven't seen someone else pointing out this problem and have no knowledge of the topic other than the behavior I saw on my own system.

  That being said, Windows 7 help & how-to text prediction is available in all editions of Windows except Windows 7 Home Basic Edition [English, French, Italian, German, Spanish] 7.

• Final score does not add...

  I made a game where catch you things that each have their own score individual, when you take one, a map will appear showing the details of this thing (displayClip). In this displayClip, there is a dynamic text box that has the amount applies for the score. He then gets sent to the final score. Everything just works how it should, EXCEPT for the fact that the just amount GET exchanged with the latter amount, added not? I thought ' score += Number (a); "would do it... anyone with any idea why it does not add to the top? Would be very grateful for any help.
  
  var displayClip = attachMovie (thing.style, thing.style, d);
  var a = displayClip.amount.text;
  var score = 0;
  score += Number (a);
  total.set_Text = score + "kr.";

  Make sure that you set no partition var = 0 whenever the case if the score is 5, for example, if you get 5 points higher the score will be set back to 0 until the points are added - which would result in the problem you are experiencing. declare the variable outside the function.

  Otherwise post the full script or a link to the fla
  --
  JAMES

• 3rd interface VLAN does not add properly

  Hello

  I have some difficulty with a switch 300 series running in mode of L3. I created two VLANS each with an interface IP that work well without any problems. The problem I have is when adding a third interface VLAN and IP - for some reason the switch seems not add the subnet in its routing as a directly connected route table.

  The first and second VLAN add correctly. It seems to be the third. I have factory default, the switch and still the same. Version is 1.1.2.0.

  The Setup is as follows:

  VLAN1 - 10.20.2.253/24

  VLAN2 - 192.168.2.253/24

  VLAN3 - 192.168.3.253/24

  Ping results are:

  switch27b42e #ping 10.20.2.253

  Ping 10.20.2.253 with 18 bytes of data:

  18 bytes from 10.20.2.253: icmp_seq = 1. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 2. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 3. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 4. time = 0 ms

  -10.20.2.253 PING Statistics-

  4 packets transmitted, 4 packets received, 0% packet loss

  round-trip (ms) min/avg/max = 0/0/0

  switch27b42e #ping 192.168.2.253

  Ping 192.168.2.253 with 18 bytes of data:

  18 bytes to 192.168.2.253: icmp_seq = 1. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 2. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 3. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 4. time = 0 ms

  -192.168.2.253 PING Statistics-

  4 packets transmitted, 4 packets received, 0% packet loss

  round-trip (ms) min/avg/max = 0/0/0

  switch27b42e #ping 192.168.3.253

  Ping 192.168.3.253 with 18 bytes of data:

  PING: net-unreachable

  PING: net-unreachable

  PING: net-unreachable

  PING: net-unreachable

  -192.168.3.253 PING Statistics-

  4 packets transmitted, 0 packets received, 100% packet loss

  Additional output which can be interesting:

  switch27b42e #show ip int vlan 1

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 10.20.2.253/24 disable invalid

  switch27b42e #show ip int vlan 2

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 192.168.2.253/24 disable invalid

  switch27b42e #show ip int vlan 3

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 192.168.3.253/24 disable invalid

  switch27b42e #show ip route

  Maximum parallel paths: 1 (1 after reset)

  IP routing: enabled

  Code: C - connected, S - static, D - DHCP

  C 10.20.2.0/24 is directly connected vlan 1

  C 192.168.2.0/24 is directly connected vlan 2

  What I am doing wrong?

  Thank you in advance.

  Craig

  Hi Craig,.

  I don't think you're doing anything wrong.

  The command line shows that this IP for VLAN3 interface is not connected, or at least nothing is connected physically VLAN3.

  Connect a PC VLAN3 and see if the interface road happens.

  I guess just that nothing is plugged physically vlan3.

  regards Dave.

• Why introduce yourself Adobe Flash Player as a plugin in Firefox does not add on Manager after that I installed it?

  I have installed Adobe Flash Player, when he was reported missing by a video. It does not appear in the add Firefox Manager. How can I fix?

  Identification of Shockwave as Adobe player has been the key to the solution.

  rsears123

• My phone does not add new phone cards

  I had to get a new phone and pay Apple does not accept my cards now. Help

  Hello

  If you always use the iPhone 6 or iPhone 6 Plus or later, try the following steps:

  • Go to: settings > General > language & region > region - make sure your region is set correctly.
  • Go to: settings > iCloud - at the bottom of the screen, disconnect.
  • Go to: settings > Touch ID & password - password turn off.
  • Restart your iPhone.
  • Reconnect to iCloud, turn on password and try again to add to your cards.

  When adding maps, follow the steps detailed here:

  Set up and use Apple pay on your iPhone or iPad - Apple Support

• MAX does not recognize NOR-DAQ traditional (old) devices * HELP

  I have a card PCIe-6259.  I want to use blocks of input-output in my program .vi (read Port DIO-DIO Port writing reading Digital Line), so I installed the version of NOR-DAQ traditional (old) devices 7.4.4.   But when I got to MAX (measures & Automation) and look on the left side under devices and Interfaces, I do not see the Tradional-NOR-DAQ tab; I see only the devices NOR-DAQ-mx, PXI, series and parallel system.

  Then when I go to run my program I get the error: error-10401 took place in a DIO Port Config Possible reason (s): NOR-DAQ LV: the specified device is not a product of National Instruments, the driver does not support the device (for example, the pilot exited until the device has been supported), or the device has not been configured using the Explorer Measurement & Automation.

  So, how do MAX to recognize that I have installed NOR-DAQ traditional (old) 7.4.4?

  Thanks for the reply!  I realized this too after going through the files for example... but thanks for the confirmation.

• MAX does not detect the module

  I am part of a team of the FRC and putting in place a Board very easy test to use to test the components.

  I try to use a cDAQ-9171 therefor, with the modules normal FRC - 9201 analog, 9403 for digital and 9472 solenoid.

  When I connect the cDAQ to the computer, MAX detects it and displays it in the tree view on the left. However, when I insert a module (9403), it does not detect it.

  I can do a device simulated, and a simulated inside that module and which works very well. But of course that accomplishes nothing.

  Any ideas? I tried Googling this problem, but I guess that my research skills need work because I found nothing.

  Hi NeatNit

  You're right, DSM is irrelevant in this case.

  I forgot to ask - it's just 9403 module which is not detected or none of them are actually?

  Kind regards

• The tab title does not appear peripheral Q10

  Hello. This is my code for the tab

  tabbedPane = new TabbedPane;
      tabbedPane->setShowTabsOnActionBar(true);
      durationFlashText= durationStrobeText = frequencyText = NULL;
  
      flashLightTab = Tab::create().title(QString("Flash Light"));
      tabbedPane->add(flashLightTab);
  
      strobeTab = Tab::create().title(QString("Stroboscope"));
      tabbedPane->add(strobeTab);
      tabbedPane->setActiveTab(flashLightTab);
  

  But the ttitle "Flash Light" and "Strobe" appears on the display. Only the default icon of the tab which is a wheel presents itself. But in z10, it works very well!

  In the device of Q10 for tabs it does not show the title of the tab as Z10.

  If you want to see the title in Q10 long device, press tab and then title will appear at the top of the tab.

• Does not add features to the option of windows 8

  I use windows 8 pro home & want to upgrade in WMC worm. but I have not found the "add features to windows 8", please help me solve this problem

  I found a solution that works, first the version no N or N has not worked for me, I was not able to find the option 'Add features' no matter what I did.

  If you use an MSDN subscription and you can download software, download and install iso from windows indicating "Windows 8.1 with update (several editions) (x 64) - DVD (English)", once the installation starts it will ask a key use, get a key for windows 8 pro, once this is made, you will have to 'Add Windows features' available, that's all it took , it seems that iso of windows 8 pro does not have this feature turned on, but the multiple editions seems to have a different version of the operating system.

  With that I could buy the pack of Windows Media Center, and now I'm under Windows Media Center on Windows 8.1 pro.

  See you soon!

• in my bonus collector since the last day, keeps giving me a message: GREAT TO KEEP PLAYING PLEASR RECONNECT: it does not add the coins and .please difficulty

  There is not much else, since the last update I can't collect coins of the bonus because of the message auto collector to reconnect. I clicked and nothing happens. can you help me with this

  Hi janetgriffin,

  Thank you for your question, and I'm sorry to hear that the bonus collector does not work. Please make sure that Firefox is configured to connect to the internet, the same way your computer. These settings are in this menu:
  Firefox > Options/Preferences > advanced > network >

  The error is a common player http://service.real.com/help/faq/top5/rp_cannot_connect.html problem help please this as well. You can temporarily turn off the firewall and Antivirus as well to ensure that it is not blocking the connection.

  I hope this helps.

• Firefox does not add the Silverlight or Flash plugins installed

  Since Firefox updated to 17.0.1, the plugins flash and silverlight has simply disappeared.
  I tried to clean install of the flash player, it didn't work. I tried to install clean an earlier version of flash player, what does not work. The plugin Manager is less useless as it says that the plugin has been installed successfully, but I can't use Netflix or any flash video. I did everything above once more with all the plugins and addons disabled, and still nothing happens.

  It gets really frustrating and indeed I plan to switch to chrome after the chain crap, forced updates, mozilla pushed down my throat... Help, please!

  -All right, follow these steps in the following order (even if you already have one of these steps, just try again):

  1. Use http://ninite.com/firefox-flash-silverlight/ninite.exe to make sure Firefox, Flash and Silverlight are perfectly up-to-date. Make sure that Firefox is completely closed before running this program. (It might be useful to download this, restart your computer, then run it)
  2. After installation, restart your PC again.
  3. Open Firefox, type about: addons in your address bar, press ENTER. Go to plugins. Flash or Silverlight appear here? You may need to enable them.
  4. If not, reset Firefox. Refresh Firefox – reset the parameters and modules