MAX indicates PXI card when it is started in Windows but not in hypervisor mode

Similar Questions

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.

• I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  It seems to work now, so if my emails get screwed up again, I'll take your advice... don't understand why he sends now and am not asking my password as it does... but I don't want to do something that I don't know if it's working now... What do you think?

• I have a windows computer 7 and when I boot it says windows could not start then he normally open windows or repair.

  * Original title: windows startup

  Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this

  Thank you

  The BIOS back to their default level settings.

  • Make sure that all internal cables, cards, and other components are installed and correctly.
  • Start your PC with essential hardware only.

  If no change:

  Perform Diagnostics on the memory and hard drive tests.

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• I installed a new sound card and it now says pilot active but not turned on, when you look at the system properties, it is there, but there is no sound at all.

  I installed a new sound card, but it will not play sounds.

  When I look at the properties under system it says driver active but not lit.

  If I try and download the latest driver it says that you have the most updated version.

  When you have a look at the sound properties it shows nothing.

  Hello

  · What is the number and the model of the computer?

  · What is the exact message you read?

  · What service pack is installed on the computer?

  Run this utility from the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

• Why a sound card would be usable in the GUI, but not in mode command line?

  I am able to connect my audio capture card and stream with GUI, but get an error in the command mode line indicating "error: problem with the audio capture device.»  Please check

  the audio capture device works correctly and is not already in use. "I can start several encoding in the GUI sessions using the same card and listen at the same time.

  I was using this card with OUT 3.1 coding as a background service on Server 2003.  3.1 or 3.2 works in command line on

  Windows Server 2008 Standard or another system with 2008 R2 company. This is direct encoding audio only and it occurs using newly registered configuration original\modified profiles. My process: copy FMLECmd.exe and rename, copy saved GUI startup.xml and name to match streamnameCMD.exe, and then use a batch file that launches the streamnameCMD.exe configured by streamname.xml. Anyone have any ideas on how to solve this problem?  FYI, from GUI, I get a popup "not detected no video capture device" because it is not installed and the session doesn't AutoStart so I can't use Exe-to-SVC or AlwaysUp to run it in the background instead of streamnameCMD.exe.

  Logs show:

  Friday, July 10, 2015 13:58:30: rename the existing file from c:\flash_logs\streamname.stream.log to the c:\flash_logs\streamname. stream.8.log

  Friday, July 10, 2015 13:58:30:

  Audio settings: -.

  Feature: Wave in 1 31160616 (Op 7-Orban

  Format: Mp3 stereo

  Sample rate: 44100 Hz

  Bitrate: 96 Kbps

  Volume: 75%

  Stream to Flash Media Server: -.

  The FMS URL: rtmp: / /Server/ live

  Backup URL:

  Name of the stream: streamname

  Friday, July 10, 2015 13:58:31: audio input device selected: wave in 1 31160616 (Op 7-Orban

  Friday, July 10, 2015 13:58:31: failed with the error 80040154:CoCreateInstance(CLSID_NullRenderer,_0,_(CLSCTX_INPROC_SERVER|)) (CLSCTX_INPROC_HANDLER), IID_IBaseFilter, pFilterRenderer.ppv ()) system specs: HP DL580 G7, Intel E7530 1.87 GHz 24 hearts 16 Gb Windows 2008 R2 Enterprise x 64, 1101e Orban capture cards. 

  Thank you very much for your advice!

  I have it.  There is a problem with WMI communication between hardware and software layers, which is solved with the addition of the function of the office experience in Server Manager.

  Once this is installed, with the required file + print feature, sharing the program will recognize the audio card when running as a service and allows multiple instances of encoding using the same card.

• Send button is grayed out when I create a new message, but not when I answer.

  Send button and the spell check button is grayed out - as are the format and insert menus - when I create a new message. When I reply to a message, all the buttons and menus work. If I start to answer, but change the beneficiary, subject to line and insert a completely new message, I can send it.
  TBird worm 31.4.0 (installed recently. The question could have started with this installation, but I'm not sure.)
  Windows 7 Pro, Version 6.1, Service Pack 1
  Gmail configured according to the instructions from google.

  and the Send button becomes active when you actually address your mail (you can not send mail without address)

  The spell check button has no content to check, so it does not work until you start to type in the body of the mail.

  Even with the insertion, and menu format if you insertion point is not in the body of the email that they do not have a destination to work with.

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

  A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

  You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

• Stop: error message 0 x 00000024 when try to start the Windows XP computer.

  Original title: does not start

  How to fix laptop computer that will not start. It starts with a blue screen with the following information. :-

  Stop: 0 x 00000024 (0 x 00190203, 0x86F4B2B8, 0XC0000102, 0x00000000)

  If chkdsk/r it won't clear up (sometimes approaching a few passes), then I have no other good ideas.

  If your system of alternative operating unspecified is something like Ubuntu or Linux, there is no way to run chkdsk on a volume NTFS of those (at least I think so).

  Since your drive seems OK in other operating systems, you will have to bite the bullet, copy all your personal data and files (documents, pictures, music, etc.) to an external drive/device and reformat your drive potentially affected HARD / failed and reinstall your XP, reinstall your applications and copy your personal files.

  It could be that the reader does not just succeed or failed.  According to the manufacturer of the HARD drive, sometimes there are utilities and tools on the HARD drive manufacturers WEB site to help diagnose and solve problems, but some of their tests could be destructive to your personal files so you must be sure that you have backed up before messing around with them things.

  Using your other OS, I save on and everything you can to another drive or external device so that you can save.

• Error: "Windows could start. A recent hardware change might be the cause. "when tried to start on Windows 7 on dual-boot system

  Original title: need help

  I have a computor I received from a friend she put windows 7 on it and then reinstalled windows Vista Home Basic, but he's running slow is anyway I can restore this computor?

  Hi nicolefraley,
   
  We recommend you to perform the Startup Repair and check the result. You can also try the following:
  a. access prompt command in the Windows recovery environment (WinRE). (See my previous post to learn how to access WinRE).
  b. type the following command and press ENTER.
  Bootrec /FixMbr
  Bootrec /RebuildBcd
  c. restart the computer and check the result.
   
  For more information, see http://support.microsoft.com/kb/927392

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Data NMEA which are received on the serial port, when the system starts causes windows 7 to interpret these data as a serial ballpoint mouse and moves the cursor jumping around.

  I know this question was asked several times before, but the solutions proposed, such as changin the registry does not help. It changes by itself. In the configuration that I have in my boat, the stream of NMEA data is directly injected into the COM port so no driver is necessary. It's a problem easily solved in windows XP, why is it so difficult in W7? There must be a way to permanently disable the plug-and-play driver load. I found this program that works only for Vista, if I understand correctly: http://www.stentec.com/en/download-freeware COM port plug & play blocker. If something similar could be provided by MS for W7, it would be very good...

  It turns out that the program at the port of Stentec COM (freeware) http://www.stentec.com/en/download-freeware care & play blocker, also works in W7. I don't know how it works, but it does, and it's good for me! It also works for the virtual serial ports.

• How do I know when my database started running window maintenance

  Since a few days we experienced slow behavior in our database about 15:30.

  At this time yesterday, I noticed that our database has performed a work of collection of statistics on the table.  Then I watched resource_manager_plan parameter and noticed that we were in a maintenance window.

  Is it possible to say what date this window began to run.  The reason why I ask, is that there is a possibility that this windows has been activated last week accidentally.

  Thank you

  Thomas

  Select WINDOW_NAME, LAST_START_DATE, dba_scheduler_windows MANUAL_OPEN_TIME;

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.