Maximum 'Accounts internal hosts' on ACS 5.2

Similar Questions

• Import of host internship ACS 5.0

  Hi all!

  I would like to import some hosts of GBA. I know, the ACS gives a model in a CSV file, but I do not download anything. Can you help me?

  Model:

  MACAddress:String (64): Required, description: String (1024), "enabled:Boolean(true,false):Required", HostIdentityGroup:String (256)

  Regads,

  Gyuri

  This is the process for importing hosts in ACS 5.0

  1) go to

  Users and identity stores:... > internal identity stores > hosts, press "Import" and then "Download Template".

  (2) open the model file. The first line should be left unchanged. Underneath, the records must be added with a record for each host

  An example of the minimum value that must be set for a host is illustrated below:

  11-22-33-44-55-66,,true, / / / group identity is left blank and the top-level node is assigned

  Format of each line is,

  Each record occupies a single line. Save the file

  (3) once the documents are created, press "import." Select the file 'step 2', then press 'Start Import'. Import the host records should begin. All errors will be displayed in the progress window

  Note that ACS 5.0 allows to add new rcords. the ACS 5.1, can also modify existing records and export. ACS 5.1

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp

• The number of devices (MAB) can be authenticated via the internal identity stores ACS 5.3? ACS 1120 (802.1 x))

  Hello

  I m currently looking for a document that specify the number of MAC addresses can be stored and authenticated via a GBA (1120)? I prefer to use the identity store internal AD or LDAP for authentication of the MAB for 802.1 X project.

  I would like to know what impact the GBA? CPU/MEM?

  What is the impact on the user authentication? delay, delay, etc.

  Please specify any other restrictions or side effect.

  Thanks for your comments

  Concerning

  Torsten Hello,

  I have confirmed on our database as well as this community and the answer is the same

  Refer to:

  https://supportforums.Cisco.com/thread/2101657

  Added additional information:

  Internal Users : 300000 Internal Hosts : 50000

  Best regards.

• (3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  The following error message appears in my events of vCenter server every minute or so:

  "(3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  I have a license of vCenter Server Foundation (4.0) with three hosts. I am aware that this license only supports three hosts. Why vCenter should log an error every minute to tell me that? Can I have it also ignored it clutter visually the events list?

  And to meet me once again, VMware has just contacted me and he was recorded as a bug and will be fixed in update 1 when coming out.

• How Nat my internal hosts for Lan to Lan VPN

  Hi all, I have to connect a L2L to another company, however, they want we host NAT internal to a different subnet. There may be side address conflicts there. They want us to the Nat my 192.168.200.0 to 10.10.12.0 subnet subnet. All class C to the L2L.

  192.168.200.0 ASA1 <---> <-- internet="" --="">ASA2<-->

  (10.10.12.0)

  Any suggestions on how I can get this working? I know that it will take just not a 100% on access lists lists some access and I'm trying to keep to a minimum and the time, right now we are just the standard nating for guests a couple of a global IP address for internal Internet traffic.

  Thank you...

  Daniel

  Here's what can be configured:

  access list static L2L permit ip 192.168.200.0 255.255.255.0 192.168.10.0 255.255.255.0

  public static 10.10.12.0 (inside, outside) access list static L2L

  If you have already configured from 192.168.200.0/24 192.168.10.0/24 NAT exemption, you need to remove it because the NAT exemption has priority over static translation.

  As a result, you must also change your ACL crypto to come from 10.10.12.0/24 instead of 192.168.200.0/24 and counterpart what ASA also has to change the ACL crypto to source of 192.168.10.0/24 to 10.10.12.0/24 as follows:

  Your ACL crypto: cryptoACL ip 10.10.12.0 access list allow 255.255.255.0 192.168.10.0 255.255.255.0

  Peer crypto ACLs: permit ip 192.168.10.0 access list cryptoACL 255.255.255.0 10.10.12.0 255.255.255.0

  Hope that helps.

• Allow outside access to the subnet to an internal host.

  Sorry Pix beginner,

  I have a server on my network with a 192.168.1.10 address. I need allow 123.45/16 network to access the server withonly 10 open port.

  should I nat address to my server internal, giving it an audience then only open port 22? or is there a better way? If I do this way how can I say only for the inside network and the rest of the world?

  That's what I thought, but didn't know how to add access to this specific network:

  public static public_ip (Interior, exterior) internal_server_ip netmask 255.255.255.255 0 0

  acl_out list access permit tcp any host public_ip eq 22

  can I replace the any part of the host with 123.45.0.0 255.255.255.0?

  Thanks for any help...

  Hello bchyka,

  Your static data and ACL seems ok... If you want to access from 123.45/16 network on the public server, you can replace the ACL as

  access list acl-enabled tcp 123.45.0.0 255.255.0.0 welcome public eq 22

  Otherwise, your Setup program should work fine for traffic to port 22...

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA

• Can not reach internal hosts VPN clients

  Hello

  I hope that someone can point out what Miss me with this config. I am able to reach clients VPN (Anyconnect) only from hosts connected directly to the ASA inside the subnet of the interface. However, the hosts on other internal subnets (177.1.10.0 & 177.1.11.0) are unable to connect to the VPN clients. The ASA is running ver 8.4.

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP 1.2.3.4 address 255.255.255.0

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  IP 4.3.2.2 255.255.255.128

  !

  network of the NETWORK_OBJ_10.11.10.0_24 object

  10.11.10.0 subnet 255.255.255.0

  IP local pool usjabber_pool 10.11.10.10 - 10.11.10.210 mask 255.255.255.0

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.10.0_24 NETWORK_OBJ_10.11.10.0_24 non-proxy-arp-search to itinerary

  !

  NAT source auto after (indoor, outdoor) dynamic one interface

  Route outside 0.0.0.0 0.0.0.0 1.2.3.1 1

  Route inside 177.1.10.0 255.255.255.0 4.3.2.1 1

  Route inside 177.1.11.0 255.255.255.0 4.3.2.1 1

  dynamic-access-policy-registration DfltAccessPolicy

  !

  TIA,

  Mike

  (1) If you have divided political tunnel, it includes these networks?

  (2) these network have a route to the AnyConnect (10.11.10.0/24) pointing to the ASA pool inside the interface?

  The display config looks ok to me.

• What is the maximum number of hosts supported by vDS

  Guys,

  I called vmware for max and min document and found only one 64 hosts of vDS supports, and only 16 vds is allow in a vcenter but not satisfied with these figures. Can someone let me know the supported maximum numbers associated with it. Thank you very much.

  Best regards, AB

  According to Config maximum 1000 hosts per vDS - https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf

• There is a maximum amount of hosts for Cisco SF300?

  Hello world

  I m using a Cisco (SRW224G4P) SF300 in my network and I m using Vlan´s.

  I m a lot of loss of packet´s in the network and the users are facing in the absence of performance.

  There are altogether seven switch´s in the network, 6 SF200 Cisco as 'access' switch´s and 1 Cisco SF300 as the 'core' switch.

  It has almost 170 devices connected to the network, mainly IP cameras, other devices are the DVR´s and the NVR´s, a server a certain stand-alone.

  Thing is I m, including the loss of packet´s, and I found this alarm in the SF300:

  2147480831 2012-Jul-06 13:14:45 % of IPFFT-W-SFFTREDYELLOW warning: IP SFFT Table Overflow, aggregated (1)

  2147480831 2012-Jul-06 13:14:45 % IPFFT-W-SFFTREDYELLOW WARNING: IP SFFT Table Overflow

  Some people say this switch (SF300) support´s only 100 guests and that s why I m get this alarm and lose packets.

  But I can't find the limit of host´s in the specification of the switch in any document from Cisco.

  Think you on this?

  There is a limit of 100 guests for this switch?

  Thanks in advance!

  Carlos

  Hi Calavalle, the module layer 3 can only the hardware switch 100 until it starts to change software. The switch can support up to 510 IP addresses but anything over 100 have wait performance degradation.

  -Tom
  Please evaluate the useful messages

• Internal error of ACS

  I'm aving 4.2 ACS for synchronization with the PDC running windows 2008, I see the error below in AUTH CS logs when a user attempts to authenticate via the external database in Windows:

  AUTH CS newspapers: AUTH 05/24/2010 11:08:19 2100 49316 0 x 2 external DB [NTAuthenDLL.dll]: Windows authentication FAILED (error 6 L)

  Any suggestions

  Thank you

  Hello

  Win2008 is supported from ACS ver 4.2 patch 4 onwards, so you need to upgrade your ACS to 4.2(latest patch).
  
  ACS 4.2.0.124 cumulative patch for windows can be downloaded from this link,
  http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des
  Also ACS is currently not supported on Win2008 R2 (ACS running on win2008 R2)
  So make sure you are running acs 4.2.0 with latest patch or 4.2.1.
  Regards,
  
  ~JG
  Do rate helpful posts

• Port forwarding? Traffic on port 1234 sends to the internal host 80 port?

  Is it possible to set up port forwarding? I want to set up a Web server on the inside, but does not change the port of servers within the network.

  I want to access the Web server from the outside via a different port number.

  is this possible?

  Thank you

  Scott<>

  Of course, just do:

  > static (inside, outside) 80 1234 netmask 255.255.255.255 tcp

  > list of allowed inbound tcp access any host eq 1234

  > interface incoming group-access outside

• Maximum number of hosts mapped to a single LUN ESX

  I have a TB 1.9 LUN presented to an IBM SVC to several groups of ESX/ESXi include versions 3.5 (ESX), 4.1 (ESXi) and 5.0 (ESXi).  I read 3.5 has a host LUN '' recommended '' limit 32.

  I'm looking for more details on this issue.  This applies only the number of 3.5 hosts who can see the data store or all combined ESX hosts.  And why is it recommended to vs a strict limit?  We are trying to implement a logic unit number mapped to ESX host clusters as possible in order to support a mass migration to a new environment.

  I'm pretty new to VMWare world so please excuse me if I'm not clear on what I ask, or do not include any other relevant information.

  I don't think it's a contradiction at all.

  It is said that a given host can have up to 256 LUNS.  A volume given (VMFS) are accessible by up to 64 hosts.

  They are 2 completely different scenarios.

• IPS - SSM password recovery

  Hello

  I have an ASA 5510 with active IPS module and I m trying to retrieve the login credentials, trying the module hw-module 1 the cmd returned a ERROR password reset: % invalid input detected at ' ^' marker. Tips please how can I recover the login and the password

  Thank you

  # sh Details of module 1

  The details of the Service module, please wait...

  ASA 5500 Series Security Services Module-10

  Model: ASA-SSM-10

  Hardware version: 1.0

  Serial number: JAF14

  Firmware version: 1.0 (11) 5

  Software version: 2.0000 E4

  MAC address range: d0d0.fd52.b4ff to d0d0.fd52.b4ff

  Data of aircraft status: Up

  Status: to the top

  Mgmt IP addr: 192.168.1.2

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 192.168.1.1

  MGMT access list: 192.168.1.155/32

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  SH ver

  Cisco Adaptive Security Appliance Software Version 7.0 (8)
  Version 5.0 device management (8)

  Updated Sunday, 31 May 08 23:48 by manufacturers
  System image file is "disk0: / asa708 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz
  Internal ATA Compact Flash, 256 MB
  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CNlite-MC-Boot-Cisco - 1.2
  SSL/IKE firmware: CNlite-MC-IPSEC-Admin - 3.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05
  0: Ext: Ethernet0/0: the address is 0024.97f0.433e, irq 9
  1: Ext: Ethernet0/1: the address is 0024.97f0.433f, irq 9
  2: Ext: Ethernet0/2: the address is 0024.97f0.4340, irq 9
  3: Ext: Ethernet0/3: the address is 0024.97f0.4341, irq 9
  4: Ext: Management0/0: the address is 0024.97f0.4342, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 25
  Internal hosts: unlimited
  Failover: Active / standby
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  VPN peers: 150

  Hi Hisham,

  This command is not supported in your version softeware - 2,0000 E4.  Also IPS module should verision 6 or higher.

  RRecovering the password for the ASA 5500 AIP SSM

   

  Note to reset the password, you must have ASA 7.2.2 or later version.

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/CLI...

  gfgfg

  gfgf

• Cisco Anyconnect to mobile license?

  Dear all:

  Currently, we will activate cisco anyconnect for mobile (IPAD), our license is currently:

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1599 MHz processor
  Internal ATA Compact Flash, 256 MB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 100
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  VPN SSL counterparts: 10
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5510 Security Plus license.

  as I read, so cisco anyconnect for mobile (IPAD), I need two licenses:

  AnyConnect Essentials and AnyConnect for Mobile, is that correct?

  If I want to activate this just for 10 users, I can do this? What are the available license I have to select by the user issues a year (or over a year?)

  can my final question get these licenses from Amazon, since google shows as these offers.

  Please help thanks

  I would go for the license more. It is much cheaper then the VPN-only-license and you can continue to use it when you change the ASA in a newer model.