Maximum HttpConnection without connections exceeded
Hello and good day,
Please, what is the most effective way to manage http connections in a case where, for example I need to load data from people and display like this:
name of the image
-------------- --------------------------
name of the image
--------------- ----------------------------
now I have to display @ 200 +, so I downloaded all the names first and created a pool of threads to manage the download of images, I have an exception when the downloading more than 20 images by doing a httpconnection is there a way to share the httpconnection knowing that the url of the picture is different for each line, I really need to know Thank you.
We use three threads in a queue of orders where we throw just runnables (with a reminder for the result).
We have changed the number, a few times, but 3 seemed the best (without real analysis, because it was not so important)
Tags: BlackBerry Developers
Similar Questions
-
Maximum connections exceeded. Can not connect
We receive this error: maximum no of connections exceeded. I tried to connect to sqlplus as / sysdba but same error. What is the best way to connect to Oracle and kill a few sessions?
Oracle Version: 11gHi user594143,
as far as I know, if the max session limit is 100
and already two 100 connections are made
then you can not connect to the same database as sysdba
so can't check v$ session if you are not able to connect. (I could be wrong here)suggested not
kill an os level pocess
ps - ef | grep oracle | grep-i local = NO -
ORA-00020: maximum number of processes exceeded
All respected DBAs,
Today I faced an issue. I found below statement alertlog file and when I tried to connect to the base of this error came on the command line.
"ORA-00020: maximum number of processes exceeded 150.
Then I restarted my Oracle Service, connected to the database and questioned
select * from v$ resource_limit and found this result.
Process
CURRENT_UTILIZATION = 52
MAX_UTILIZATION = 61
INITIAL_ALLOCATION = 150
LIMIT_VALUE = 150
Sessions
CURRENT_UTILIZATION = 53
MAX_UTILIZATION = 60
INITIAL_ALLOCATION = 248
LIMIT_VALUE = 248
If my process is exceeded then why MAX_UTILIZATION = 61 only? Please, help me to understand this.
This view is dynamic (it will reset on reboot) and restart you the database.
So you can only say that after the restart of the database the number of processes is already 61.
-------------
Sybrand Bakker
Senior Oracle DBA
-
No available buffer space (maximum number of connections reached?)
I get the error below on my site. I am on a shared host running IIS 7.0 and Coldfusion 8. I called my hosting company and they said it was a script error, but I don't see how it is. I have the same scripts running on my local server without any problem, and when I got the site on another computer host a few months ago I never had this problem. Can someone help, even if you can reassure me that he is not a script error I would appreciate it
Error message:
Run database query error.
Communication link failure due to underlying exception: * BEGIN NESTED EXCEPTION * MESSAGE java.net.SocketException: no available buffer space (maximum number of connections reached?): connect STACKTRACE: java.net.SocketException: no available buffer space (maximum number of connections reached?): connect at java.net.PlainSocketImpl.socketConnect (Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket. (Socket.java:366) at java.net.Socket. (Socket.java:209) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO. (MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc... Whoever you talk to your hosting company is stupid or dishonest. It is - clearly - a problem with
your config to the DB, the DSN configuration or the driver itself.
And nothing to with you, CF code.
I suggest you escalating the issue to the line manager who you were talking to @ the hosting company. Once your problem is, and how technology has responded to you.
--
Adam
-
Using my laptop without connection to the internet.
I tried to get on my computer to work on a document. There is no Wi - Fi, hotspots or land lines around so I can get on my PC. What can I do to get to my documents without connecting to the internet to open up my PC?
Oops... Problem solved. I turned off airplane Mode.
-
How can I use my Apple TV directly on MY iMac laptop Pro? I want to say on my iMac directly WITHOUT connecting to TV
There is no such thing as an 'iMac Pro laptop. And you can not directly connect an ATV to something other than a HDMI entry screen.
-
Possible to access the service materials? (without connection to a user account)
I'm curious to know if there are problems with access to hardware OR a program running as a service (IE with no user logged on to the computer). I'm about to start development on a service addressing a NOR-IMAQ device, and I need to begin to acquire data when the computer starts without connecting to a user account. I don't know if access to an INTERFACE created in NOR-MAX requires that a user be logged.
It will run on Windows 7.
I appreciate any idea. Thank you!
I had time to do a basic test and was able to capture data from a camera through IMAQ and store on the disk without the need to log on successfully. The service launched at startup and a lot of stored data before I had the chance to open a session.
-
can I send a fax without connecting to a phone line
I plan to move to a 'verizon wireless' home phone that does not support faxes... Is there a way I can send a fax from my HP Officejet printer all-in-one without connecting to a phone line?
HelloUnfortunately, it is not possible. Need to connect both devices to send a fax. -
How to perform a task planned without connection?
I would like to know how to run a task planned without connection.
Does anyone have any suggestions?
Thanks in advance for your suggestions"Run if the user is logged in or not" only works for tasks that have no user interface. The notebook has a user interface, so it can not start this way.
The password would need to be saved for any ' run task if the user is logged in or not ', because there is no other way to confirm the identity of the user on the approval of the task.
-
Signature custom for the maximum number of connections
Hi, is there a signature to check the maximum number of connection to a host attacker to open a port to the victim? or should I make a costom for this signature?
Hello
You certainly can do it on the IP addresses, follow these steps in making a signature Atomic-ip looking for a tcp packet with only the SYN flag set on port 443 to the destination. You would then add a number of events for the number of connections you need. According to the site however this will flood the channel alarm with alerts, because traffic going out etc it will trigger. Of course, this can also be problematic with NAT.
I don't know one of the guys ASA on these forums could give an answer better than me with regard to the configuration of the SAA.
I understand they'RE a dynamic IP filtering or something that can be used to do this, although I've never configured myself.
Thank you
Neil
-
Facing the question with the Maximum number of connections Timesten
Hello
In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.
kernel.SEM = 655 670720 128 1024
The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.
In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.
Quick help is very appreciated
Thank you
Agnes
Hi Agnes,.
Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).
The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."
In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.
Therefore, to allow connections you must:
1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)
2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.
3. load the database back in memory, start the replication agent, starting applications.
A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.
Chris
-
HP 6110 as a stand alone Copier and fax without connecting it to my PC
Can I use a HP 6110 as a stand alone copier & fax without connecting it to my PC with Windows 8?
Hi rogerdad,
Yes. The printer does not have to be connected to a computer for copies or faxes. Let me know if you have any other questions.
-
Version of the execution of database without connection
Hi all
I have a machine to test (Oracle Linux) where some databases are running, 4 different versions.
Is it possible to know the version of one of them, without connecting to it? Of course, I can try all versions, but I would like to know if it is possible to avoid it.
Thanks in advance.
Guido
Hello
You can do this, but not sure that it's better to simply log - here's how it might work...
ps - ef | grep pmon
(find the pid of pmon)
then
lsof | grep
| grep oraus.msb This will show you the House running the pmon process go
You can then pass this House in this command
/ Lsinventory OPatch/opatch-oh | grep "Oracle Database". which gives the result
Oracle Database 11g 11.2.0.2.0
I guess you could script all that much up?
See you soon,.
Rich
-
How to handle the task of automation without connection SGD-Automation
Hello
I have created an Automation task, the task performs the work, but after completing the work, I need to connect SGD-automation user and update the status of the task to move to the next step. How to avoid manual handling in the task of automation? How to do the task to go to the next manual task without connection with CMS-automation.
Kind regards
MargIn your Xquery use the syntax "context: completeTaskOnExit ($context, $exitStatus).
Set these two variables ($context, $exitStatus) according to your required exit status.
Hope this has helped.
Thank you
-
Financial reports of Hyperion Studio error. No max connections exceeded.
I met an error en Studio, it says Max No of connections exceeded.
Happened twice in this month, every time that happens to restart the statement and analytical framework. Can anyone suggest where I can increase the number of allowed connections max?Ok... My bad...
You tun serviceconfig.sh under Hyperion_Home\products\Foundation\workspace\bin to bring up the GUI, and then in the menu layout, you will see remote service Configurator, select that and provide credentials. After you sign in, it should y RM1 and SB1. You will need to go o RM1 and SB1 properties and then to increase the connection. Need to reboot for it to take effect.
Let me know
Maybe you are looking for
-
Not enough visible trackpad pointer
You can customize the pointer on the screen? It is sometimes difficult to see, and I want to make it more visible.
-
I have a desktop computer of p6267c 5 years or more running Windows 7 Home Premium - 64-bit. He was a great computer with no problems other than a graphics card failed out of the box when it was delivered first, but that was immediately replaced und
-
Help, please. My HP Pavilion Entertainment PC (laptop) won't start.
It worked perfectly fine the day before. But when I pressed the button "Activate" this morning, nothing happened to her. Problems I've noticed recently with my laptop: -Whenever I tried to open 2 PDFs at the same time, my computer laptop lag and the
-
I have a new BlackBerry 8900. Whenever I try to add 3rd party software, I get the error message "no additional applications for your device were found". Tried loading MSDict English-French dictionary. I was using Desktop Manager 4.7, then tried 4.5
-
ISE vs NGS: support of the API
Hello When you want to implement access as a guest for our wireless network. Now, we are facing two different solutions (1) the comments NAC Server -old product (this means it will go EoS earlier) -does not present endpoint profile (you must use the