Maximum number of documents in a container

Similar Questions

• What is the maximum number of documents that can be combined into a single PDF Document?

  I need to combine 50 to 100 files in a single document, but the PDF pack I only allows me to combine 12 or more. What should I combine files of more than 12?

  Hi toddk23479425,

  You can combine up to 12 files at a time in PDF format. If you need to combine several files, combine them in lots of 12 or less to PDF and then combine these PDFs.

  Please refer to the FAQ FAQ | Adobe PDF Pack

  Kind regards

  Nicos

• What is the maximum number of supported in a PDF document hyperlinks?

  What is the maximum number of supported in a PDF document hyperlinks?

  How will I know how many hyperlinks, there is in a PDF document?

  There is no limit per document. Links (with hyperlinks to URLS) are not stored all together, but stored for each page. There is no limit per page either but I would begin to worry about performance if there is more than 100 per page.

  Just for fun, I checked how many links there are in the PDF file, I use most often (of about 6000 pages). ; There are 52 000 links inside.

• Maximum number of files that a folder can contain

  Title says it all. What is the practical limit to the number of files that can contain a single folder? These would all be tiny files, usually less than 20K, I'm looking for emotional limit of Windows, rather than the clear disk space limit.

  This is on WinXP SP3 and these files would be created in Word.

  Thanks for any idea.

  I think that with Win7, 20,000 of handling should not be a problem.  Depending on how you access them (such as manually via file |) Open who needs time to load all files to choose among them) it will be slow, but even XP that will handle a lot, even though it may be slower.

  Steve

• Maximum number of contacts in a list of contacts (Windows mail)

  I would like to know what is the maximum number tha of contacts, I can create a list of contacts.

  I use Windows mail (Vista)-

  Thank you

  João Carmona

  Goofd morning.

  My question has been asked on bad terms.

  What I want to know is the maximum number of contacts that can be supported a contact group.

  Thank you

  João

  Hi João,.
  I have found no document written on a maximum number of contacts but some ISPs have a limit on the number of recipients in a message in order to care.

  Andrei Andrade TFC, TCSP, including, MCTS70-620 MCP70-290

• Windows 7 disk management utility does not allow for creating simple volume: maximum number of partitions exceeded error

  I am trying to create a new partition in Win7 using the disk management utility. Shrank lecteurC existing to create unallocated space. Am not able to create a simple volume with this space unallocated due to the following error message.

  "You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions".

  How to fix this or go around with another method to create partitions?

  Hello

  You will need to convert the dynamic disk before creating the extra partition. To do this in disk management:

  -Right-click the disk 0 (gray area) which indicates the total size of your hard drive

  -Select 'convert to dynamic disk.

  Once you have converted to dynamic disk, you will be able to go and create the new simple partition.

  I hope this helps.

  Best regards, Damian

  Damian Coverly

• Maximum number of partitions errors

  Original title: impossible to assign the unallocated disk space.gives drive letter an error ' you cannot created new volume in this unallocated space because the disk already contains the maximum number of partitions. Please help, thank you. Lesley Fernandes

  Impossible to assign the unallocated disk space.gives drive letter an error ' you cannot created new volume in this unallocated space because the disk already contains the maximum number of partitions. Please help, thank you. Lesley Fernandes

  You are allowed a maximum of four partitions. More than likely you have created four "Primary" partitions

  If you want to access this "Unallocated" space, you have two choices:

  (1) Expand/extend the last partition to include the unallocated space.

  (2) (delete the last partition "Primary" (save your data first) and create an 'Extended' partition, which can then be used to create one or more logical drives.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Contact maximum number fields?

  Hello

  What is the maximum number of Contact fields in the Contacts folder?

  Thank you

  POOJA

  Hi Pooja,

  Maximum number of fields for Contact in Contact documents is 250.

  Try it.

  Hope this has helped.

• Maximum number of Service requests

  Hi all

  Greetings for the day!

  After continuous follow-up with my client, I recently got the number of the ITUC, using which I created ID metalink and triggered several SRs for pending open questions and began following. However, the management insisted on open SR only for critical questions, in order to avoid the maximum number of service requests.

  It intrigued me, according to my knowledge, there is no limit or value set, who says you can't create more than Nnn number of service requests, please let me know if it there in a. I tried to search for the same thing on the forum as well as google, but did not find. Furthermore, another application that came to my mind was, if I have the Database Enterprise edition license, and I raise questions about FCAC, it will be by any violent means the terms of the assistance contract?

  Hereafter, document as well, but no luck.

  http://docs.Oracle.com/CD/E25290_01/doc.60/e25224/SRhome.htm

  Thanks in advance,

  AbbasDBA

  It depends on the nature of your organisation has subscribed the support contract.

  For example, see the http://www.oracle.com/us/support/library/057419.pdf 'Incident Server Support Package' (page 13)

  Most customers would sign up for normal support that does not limit the number of SRs, but some they choose this method for specific projects / implementations.

  Hemant K Collette

• Install HRCS9.0 and PT8.53 with Linux question: the files intiPT853.ora and initHRCS90.ora: exceeded maximum number of DB_FILES

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted. The error message is less to:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  In the home/user/OracleDB_Home/dbs/initPT853.ora file, its parameter db_files has 3 values: small 400, 1021 medium and large 1500. The initial value is 1021 and it works correctly at the beginning.  But after the implementation of another instance of HRCS90, the above error message and instance PT853 is not mounted. I change the value of db_files 1021 to 1500 in the initPT853.ora file and restart the Linux operating system. But get the same error as below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  
  In the home/user/OracleDB_Home/dbs/initHRCS90.ora file, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly. I start instance HRCS90 right after the above error message as below:

  SQL > shutdown immediate
  ORA-01507: database not mounted
  ORACLE instance stops.

  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  [user@userlinux bin] $ export ORACLE_SID = HRCS90
  [user@userlinux bin] $. / sqlplus / as sysdba

  SQL * more: version 11.1.0.6.0 - Production on sat Nov 23 12:40:02 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  SQL > select * from psdbowner;

  DBNAME OWNERID
  --------          --------
  HRCS90 MYNAME

  SQL >

  
  As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  My question is:

  1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  Thank you.
  
  

  user8860348 wrote:

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted...

  I'm sorry, but I do not understand that "Instance" means here.

  > In the file home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, 1021 medium and large 1500.

  Are you do not use a spfile? The file actually contains 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > But after set up another instance of HRCS90, the above error message and instance PT853 is not mounted

  Still, I don't know what that means.

  > In the file home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly.

  Once again, 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  Again, I don't understand what exactly are HRCS90 and PT853. Can not help.

  > 1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  I am sure, you have not a problem with this setting, 1500 files in the database is fairly large. Recently, I've built a demo, the default 1021 was ok for me. You should have done something wrong somewhere.

  Nicolas.

• Reached the maximum number of pluggable databases

  Hello

  I seem to have a problem creating a pluggable database.  I'm getting ORA-65010: maximum number of pluggable databases created.  What seems strange to me, is that I have only a plug-in database in the container.  This doesn't seem to be a common theoretical problem? maximum number is 252.? I've seen a few different numbers while rummaging through the internet.  I can't seem to find documentation about this limit or why that would trigger my max at 1.  I wonder if this can a hardware limitation, but after going through the error logs and love it, I can't find any problems with the initial installation.

  A little info, installation was complete installation + CBD + PDB.  Class Server, standard installation and I can connect both the container and the snap-in internal database and connection to the outside.  Most of the time I think its configured correctly.  I have a feeling that I missed something along the way, but I'm struggling to find an explanation for this.  The documentation is fine as a response, just needing a point in the right direction.

  Thank you.

  Hello

  For Enterprise edition of Oracle database, the limit is 252 connectable to databases. If you are using an Oracle database Standard edition, you can create a single snap-in database.

  Thank you

  Sanket

• Maximum number of virtual disk for a virtual machine in vSphere 4.1

  I read the maximum record rate and see that the maximum number of virtual disk is 16 for FT.

  I have the same document I seem not to be able to see the number max of virtual disk that can be taken in charge for a virtual machine.

  The number will be the same as the number of LUNS per host which is 256?  I know the max is for the host, but that be will come the number of Director to the total number of virtual disk that can be supported in the virtual machine?

  In fact, in a logic unit number, we can have more than one data store that can be mapped to a virtual disk.

  I'm confused.

  Thank you and have a nice week,

  Anthony.

  If I am not mistaken, you can attach up to 60 virtual disks to a virtual machine. 15 for each of the 4 virtual SCSI controllers.

  André

• Maximum number of connection brokers?

  I ran into some odd provisioning issues in our environment view 4.0.1.  After spending a bit of time stable and working with support it seems we have too many connection brokers and the issue seems to be related to problems of ADAM replication.

  My question is where if anywhere is there any limit documented for the number of brokers of the connection you can have in a single configuration of view?  I spent some time flipping through the installation guide and a few other documents for the view.  They list several maximum values, but I couldn't see any specific maximum number for brokers of the connection.  If anyone has seen this documented limit can you let me know the source?

  Thank you

  unless you can find something proving support evil, I take their advice and start to reduce the amount of connection brokers. We have a few VMware View environments, but our more great who has 2800 VPC connected to 3 instances of vCenter uses only 3 brokers.

  The problem is that if the support tells you to do something and you don't have, you kind of you push into a corner.  Reduce the amount of servers in connection to what is recommended and if the problem persists, you have the leverage to tell them, 'now that.

• HFM - maximum number of entities?

  Hello HFM community.
  
  We are currently building a new HFM application that requires loading entities 180 000 +. Entities k 180 is mandatory and cannot be derogated from. My question, is there a limitation of the system on the maximum number of entities that can be loaded into an application of HFM.
  
  Since we began to build the new application, the performance of the system took a serious blow with regard to the time it takes to load the metadata, executing consolidated, accounts by logging in to the application, etc.
  
  System architecture:
  
  E.M.P. 11.1.2.1 - broadcast in all of 8 bits in Windows Server 2008 x 64
  32 GB of RAM - distributed
  1 Server Web HFM
  4 HFM application servers
  1 shared server / Foundation
  1 Server FDM
  
  Any comments would be appreciated.
  
  Thank you
  Tony

  Tony,

  After examination of the documents of the performance / subcube architecture documents, I don't see anything that indicates a real number.

  Looking at the accession of the database, the ItemID field for the tables of the entity (i.e. the unique ID field) is a 4-byte integer that has a max value of over 2 billion.

  Hypothetically speaking, shouldn't there be one question here other that it's crazy. :-)

  Since it's just a dev environment, I would almost think you want an application server with as much RAM as you can throw at it. (updated accordingly registry settings)

  Another suggestion: ditch rules files. (or at least what it is absolutely useless) [Assuming that it is a]

  Another suggestion: make several applications and subdivide data entities in this way. Combine data and then extract and load everything in the final application for all?

• Maximum number of outdated lines

  Hello
  
  I'm using Smart View (Hyperion 11.1.2.1) where large data must be retrieved. But during the extraction, I get the error message "error Essbase (1020011): maximum number of lines [5000] exceeded." I modified the file essbase.properties as below.
  
  ################################################################################
  # Properties file used by ANALYTIC PROVIDER SERVICES
  # The version 11.1.2.1.00 - Talleyrand SP1
  ################################################################################
  
  # Use / for separator.
  
  # Data used in embedded mode JAPI directory
  # Specifies the location of the folder that contains the file domain.db
  # If the FMV - DESS_ES_HOME option points to a HPS installation directory and domain.db
  # beneath ESS_ES_HOME/data, this entry is not necessarily present.
  # else, specify the location of doamin.db here.
  # system.dataDir =
  
  # Specifies values for the Essbase Server network connection
  # APS will try netConnectRetry times to connect to an Essbase server.
  olap.server.netRetryCount = 1200
  olap.server.netConnectRetry = 3
  olap.server.netDelay = 1200
  olap.server.netSocketTimeOut = 1200
  # Specifies the maximum rows/columns for dataquery grid. a value of 0 indicates no limit.
  service.olap.dataQuery.grid.maxRows = 10000
  service.olap.dataQuery.grid.maxColumns = 255
  
  # Record Configuration - logging.xml moved
  
  # Maximum downtime for HPS sessions (in minutes)
  System.session.Timeout = 60
  
  # system.faultTolerance
  # retryTime - Maximum number of times to retry
  system.faultTolerance.retryTime = 10
  
  # monitorInterval - interval schedule thread to monitor the cluster components.
  term # in seconds
  system.cluster.monitorInterval = 30
  
  ################################################################################
  # BEGIN: Specific properties of Smartview
  ################################################################################
  SmartView.System.checkforspecialchars = true
  smartview.webservice.autoadd.EssbaseLocalhost.server = true
  SmartView.WebService.autoDeploy.force = false
  SmartView.WebService.autoDeploy.Warn = false
  SmartView.WebService.gzip.compression.Disable = false
  ################################################################################
  # At the END: specific properties of Smartview
  ################################################################################
  
  After doing this, I restarted the service - "Hyperion - Web Application Services Provider". I still get the same error in Smart View.
  
  Please let know us if I missed something.
  
  Thank you.
  
  Edited by: user13325223 January 6, 2012 12:39

  Have what place you updated of essbase.properties, as it exists in a number of places

  See you soon

  John
  http://John-Goodwin.blogspot.com/