MAXL set out in the export table Alias

Similar Questions

• 10g pivot table out on the grant table

  Hi, experts,
  
  No there is no way to sort the pivot table according to the values in table of grant?
  
  Thank you very much!

  example is necessary...

  do you mean void totals?
  I'm assuming you own m1, d1, d2, d3 etc and applying subtotals on d2 dimension...

  If so,.
  create a column with fx:
  sum (m1 d1, d2), then in the criteria tab himself sorting on... can it exclude pivot...

  If subtotals on d1 (d1 m1) just sum is enough...

• How to write a procedure for setting Out when the condition fails

  Here's my query, it works very well when the condition is fulfilled with the valid user ID and password
  
  create or replace
  PROCEDURE ISVALIDUSER / * this is procedure created to validate the connection information to users created on 09212012 by Charbonneau * /.
  (
  pUSERID IN VARCHAR2,
  Ppassword IN VARCHAR2,
  pUSERTYPE OUT NUMBER
  )
  AS
  tmpUSERID VARCHAR2 (30);
  tmpPASSWORD VARCHAR2 (150);
  tmpIsative VARCHAR2 (10);
  BEGIN
  SELECT Userid, PASSWORD IN tmpUSERID, tmpPASSWORD FROM USERMASTER WHERE USERMASTER. USERID = pUSERID and USERMASTER. PASSWORD = Ppassword AND isactive = "Y";
  / * Check ID USER Existed or not * / / * PASSWORD verification is Existed or not * /.
  IF tmpPASSWORD = AND tmpuserid = pUSERID THEN pPassword
  USERTYPE of SELECT INTO pUSERTYPE FROM USERMASTER WHERE USERMASTER. USERID = pUSERID and USERMASTER. PASSWORD = pPassword;
  ON THE OTHER
  BEGIN
  1 SELECT INTO pUSERTYPE FROM DUAL;
  END;
  END IF;
  END;
  
  
  Here I am facing a problem when I get invalid user or password ID it is failed - 1 in pUSERTYPE which is OUT setting
  Please suggest

  You need to read about the exceptions - {message identifier: = 9360013}

  create or replace
  PROCEDURE ISVALIDUSER /*This is Procedure created to validate Login users information Created on 09212012 by Chakravarthy*/
  (
  pUSERID IN VARCHAR2,
  pPASSWORD IN VARCHAR2,
  pUSERTYPE OUT NUMBER
  )
  AS
       tmpIsative VARCHAR2(10);
  BEGIN
       SELECT USERTYPE INTO pUSERTYPE
       FROM USERMASTER WHERE USERMASTER.USERID=pUSERID
       and USERMASTER.PASSWORD=pPASSWORD AND isactive='Y';
  exception
       when no_data_found then
            pUSERTYPE := -1;
  END;
  

  You store your password without encrypting? One who is to have access to your table will see the password...

• Remove prepared record aid set out in the OPS.

  Dear friends,
  
  I have an obligation to remove a record from a table using the connection parameter, how do I do this using
  prepared, statement
  
  I have this below code but its not working at the moment. Can someone help me to do so.
  
  public void DeleteAttachment (String DeleteheaderId)
  {
  
  
  Conn Connection is getOADBTransaction () .getJdbcConnection ();.
  
  Try
  {
  
  
  System.out.println ("-to the INTERIOR of the TEST WHO-");
  
  String query = "DELETE FROM SDM_ATTACHMENTS WHERE PARENT_ID =: 1";
  
  PreparedStatement stmt = conn.prepareStatement (Query);
  stmt.setString(1,DeleteheaderId);
  stmt.executeUpdate ();
  
  
  }
  
  catch (System.Exception Exception)
  
  {
  
  throw new OAException ("Error in the application of staffing" + exception, OAException.ERROR);
  }
  }
  
  
  Thanks in advance,
  Keerthi.k

  Hello

  use the code below

  public void DeleteAttachment (String DeleteheaderId)
  {

  ResultSet rs = null;
  OADBTransaction trxn = (OADBTransaction) getTransaction ();

  Try
  {

  System.out.println ("-to the INTERIOR of the TEST WHO-");

  String query = "DELETE FROM SDM_ATTACHMENTS WHERE PARENT_ID =: 1";

  PreparedStatement stmt = trxn.createPreparedStatement (Query, 1);

  stmt.setString(1,DeleteheaderId);
  RS = stmt.executeQuery ();

  }

  catch (System.Exception Exception)

  {

  throw new OAException ("Error in the application of staffing" + exception, OAException.ERROR);
  }
  }

  Thank you
  Pratap

• When I send link invisibly attached to a Word, the link address in full is set out in the message I get

  Why, when I send link invisibly attached to a Word, is the address of the link entire wrote in the message that I get? Can I fix?

  
  

• Questions about the export of the files (tab out, location of export file and preferred Format)

  Hello

  I exported just my first movie PrPro test.

  Three questions.

  1. I'm a little worried because before I exported it, no picture was visible in the tab out of the export settings panel.  I wanted to use to check beforehand that I had no black bars, but all that I had was a black screen, as seen immediately below:

  

  2. my sequence has been properly exported.  But where it has been exported to?  How can I learn where?

  3. Finally, I would like to present my film 100 trees, which hopefully completed by April 19, a handful of middle and high level film festivals.  I turned it in 1920 x 1080 24 p.  What export format would probably work for the largest percentage of film festivals?

  Thank you!

  Matt Dubuque

  Matt,

  I can't comment on # 2 and # 3.

  2.) exported the file will be located where you chose for the destination folder. If you did not note that, just go through the process to redo the export, but note the destination folder (should be a sticky, so that it won't change until you change), but do not go through the complete export - cancel just, once you see the destination folder. Otherwise, you can search your system for the name of the sequence, or anything that chose you as the name of the export file.

  3.) there is not one answer for this. I communicate with each festival and ask for them plug complete standard for presentations. They all have the same maybe, but you may need to make several exports, one for each festival. Let them tell you what they want. When you get their spec sheets, if you have any questions, come back to this thread and post their requirements, and someone will be able to help interpret the requirements.

  Good luck and good luck to the festivals!

  Hunt

• Why not work data fusion in the mount table?

  I try things and I can't datamerge working in the jury of the dough.  is there a way to make this work?

  If you set a variable placeholder out in the mount table and own a part of it continue on the page, it will work. Place a variable in the slug area will not work without touching a part of the page.

  

• How can I export table and cell styles to use in another InDesign document?

  I've been looking for... and looking but cannot find out how to export table styles in InDesign CC. If there is an option of the control panel load table styles, it goes without saying that there should be an export. Any help would be appreciated, thanks.

  Frank.GRG wrote:

  If there is an option of the control panel load table styles, it goes without saying that there should be an export.

  I understand your logic, but you think too much of it. Charge function Styles opposes the need for an export feature. When you call the function of load, you simply select the source document, then the individual styles that exist already in it. They need not be implemented beforehand.

• SmartView default Table Alias

  Hello
  
  When I connect to Essbase via Smartview default Alias Table is None. How can I change this behavior so tha another table is used?
  
  I change the active Table Alias in the properties of outline with the Console of the Essbase Administration, but that did not help.
  
  You have any advice how to do this?
  
  We have Smartview Version 9.2.0.3.0.005
  
  Thx for your help.

  Kevin,

  Take a look at this thread: Re: migration of Essbase addin

  It works in the 9.3.1. I don't remember if I used SV in 9.2 - I don't think so maybe that the feature was not there?

  Kind regards

  Cameron Lackpour

• Try to export a Table Alias via ODI

  I wanted initially extracted table Alias Essbase Maxl (original note below) - but not sure it's viable. Whoever did this by ODI?
  
  ===============================
  
  I'm having a hard time finding the correct MaxL to export and table alias - basically, I need to export the default table, shift some periods and years and then recharge it in a table different aliases. Any help is appreciated!
  
  [email protected]!

  Hello

  It is possible, but it takes a little effort, I did on this blog a bit backwards:-http://john-goodwin.blogspot.com/2008/10/odi-essbase-challenge-extracting.html

  The other option is to run some maxl running an OS of ODI command to extract of the alias, and then read information in the output file.
  MAXL statement would be:-database query 'Sample'.' Basic ' list of alias_names in table_alias "Default."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Using Merge in oracle 11g this error SQL Error: ORA-30926: failed to get a stable set of rows in the source tables

  whenever I run this code I get this error

  SQL Error: ORA-30926: failed to get a stable set of rows in the source tables

  30926 00000 - "impossible to get a stable set of rows in the source tables.

  * Cause: A stable set of rows could not be achieved due to the large dml

  activity or one not deterministic where clause.

  * Action: Remove any non deterministic of the clauses and reissue of the dml.

  Don't know wht goes wrong!
  

  
  

  SQL:

  MERGE IN VENDORS_ACTIVE_DATE s

  USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,

  NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.

  (case when ((d.VENDOR = s.VENDOR) and (d.COMPANY_CODE = s.COMPANY_CODE)))

  )

  then "MATCH".

  When d.COMPANY_CODE is null

  then 'DELETE '.

  When s.COMPANY_CODE is null

  then "INSERT."

  else 'UPDATE '.

  chck end)

  from (select * from VENDORS_ACTIVE_DATE where COMPANY_CODE = 2) s

  full outer join (select * provider where COMPANY_CODE = 2) d

  on (d.COMPANY_CODE = s.COMPANY_CODE AND s.COMPANY_CODE = 2)

  ) d

  WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.chck in ('UPDATE', 'GAME', 'DELETE'))

  WHEN MATCHED THEN

  UPDATE SET s.VENDOR = d.VENDOR

  WHERE d.chck in ('UPDATE', 'DELETE')

  DELETE WHERE d.chck = 'DELETE '.

  WHEN NOT MATCHED THEN

  INSERT (SELLER, COMPANY_CODE)

  VALUES (d.VENDOR, d.COMPANY_CODE)

  Work request: (deleted the duplicate data in tables (source and target))

  MERGE IN VENDORS_ACTIVE_DATE s

  USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,

  NVL (d.ACTIVEDATE, s.ACTIVEDATE) ACTIVEDATE.

  NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.

  (case when ((d.VENDOR = s.VENDOR))

  - AND D.ACTIVEDATE = S.ACTIVEDATE

  and NVL (d.ACTIVEDATE, trunc (sysdate)) = NVL (s.ACTIVEDATE, trunc (sysdate))

  and (d.COMPANY_CODE = s.COMPANY_CODE)

  )

  then "MATCH".

  When d.COMPANY_CODE is null

  then 'DELETE '.

  When s.COMPANY_CODE is null

  then "INSERT."

  else 'UPDATE '.

  chck end)

  from (select * from suppliers where COMPANY_CODE = 2) d

  full outer join (select * from vendors_active_date where COMPANY_CODE = 2) s

  on (d.COMPANY_CODE = s.COMPANY_CODE and s.vendor = d.vendor)

  ) d

  WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.VENDOR = s.VENDOR AND d.chck in ('UPDATE', 'GAME', 'DELETE'))

  WHEN MATCHED THEN

  S.ACTIVEDATE = UPDATE SET d.ACTIVEDATE

  WHERE d.chck in ('UPDATE', 'DELETE')

  DELETE WHERE d.chck = 'DELETE '.

  WHEN NOT MATCHED THEN

  INSERT (VENDOR, ACTIVEDATE, COMPANY_CODE)

  VALUES (d.VENDOR, d.ACTIVEDATE, d.COMPANY_CODE)

• MERGE or PL/SQL statement? (and ORA-30926: failed to get a stable set of rows in the source tables)

  Hi SQL & PL/SQL gurus...

  A bit of advice please...

  IM loading documents in the system... In this context, I have a routine that check the progress of loading (upload_records) against an existing table (supplier_records).  If the details differ so it updates, and if the folder does not exist, it inserts a new record...

  About 90% of the time, recording will be unchanged and the statement will do nothing...

  The challenge I have is that I get the error above fairly regularly, because (I think) there are simultaneous users, loading documents in the system... so, both tables change regularly...  The merge statement is below... but my question is: I would achieve anything by converting the merge statement into a PL/SQL loop that checks if the recordset contains a record that needs to either update or insertion? Would be the first simple quick check that reduction of 90% of the files works better, (with further processing if the folder must insert or update) and this would remove the error above, or the merge statement made the same thing anyway, and I should leave it as what? or is my incorrect merge statement and which contribute to the error?  The merge statement, if it finds a match, updates the record anyway, even if she didn't need to...  (which is not very effective)... However a pl/SQL loop will have to check if the record exists. check if it needs to be changed, change it if she does... Insert if the folder does not exist.

  MERGE statement is:

  MERGE INTO s suppliers

  USING (select distinct (sup_provision_id),

  provider,

  sup_acc_holder,

  sup_bank_acc,

  sup_bank_name,

  payments_upload sup_bank_branch

  where csv_id =: P20_CSV_ID) could

  WE (pu.sup_provision_id = s.supplier_id)

  WHEN MATCHED THEN

  GAME UPDATE

  s.SUPPLIER = pu.supplier,

  s.SUP_ACC_HOLDER = pu.sup_acc_holder,

  s.BANK_ACC_NO = pu.sup_bank_acc,

  s.BANK_NAME = pu.sup_bank_name,

  s.BRANCH_NO = pu.sup_bank_branch

  WHEN NOT MATCHED THEN

  INSERT (s.SUPPLIER_ID,

  s.SUPPLIER,

  s.SUP_ACC_HOLDER,

  s.BANK_ACC_NO,

  s.BANK_NAME,

  s.BRANCH_NO,

  s.CAT)

  VALUES (pu.sup_provision_id,

  able. Beg,

  Pu.sup_acc_holder,

  Pu.sup_bank_acc,

  Pu.sup_bank_name,

  Pu.sup_bank_branch,

  'S' );

  Thank you very much

  Richard

  Hi, Richard,.

  Richard Legge wrote:

  Hello.. Thanks for the reply...... The reason for the 'distinct' to ensure that the query retrieves only one line (based on the extraction of the full line, as you point out)... (so why he would never get more than one?) Well Yes... know that the media are not quite relevant...

  The reasoning is that out or 5000 records. 4000 will have the same provider... so want to retrieve a single record for what it (or other unique visitors who may be similar but have different criteria) and simply update the corresponding record, insert if there is no trace...

  Rgds

  Richard

  SELECT DISTINCT guarantees that no 2 rows will be exactly alike.  In other words, if you compare the 2 rows in the result set, either sup_provision_id supplier of GOLD supp_acc_holder for GOLD OR one of the other columns (or maybe 2 or more columns) will be different.  It does not guarantee that any 1 column will be unique.

  FUSION requires that, when a match is found, it should only be 1 line in the result set generated by the USING clause.  Given that the matching condition is

  WE (pu.sup_provision_id = s.supplier_id)

  This means that pu_sup_provision must be unique.  The ORA_30926 error occurs if it is not unique.  SELECT DISTINCT to ensure that complete lines in pu are unique, but it does not guarantee that any single column will be unique.

  Depending on your data and your needs, you may need to change the USING clause, so that sup_provision_id is unique.  You may need to add more conditions to the WHERE clause, or do a GROUP BY or use an analytic function such as ROW_NUMBER.

  If you need help, post a small example of data (that is, CREATE TABLE and INSERT statements for all the tables involved, as they are before the MERGER) and the exact results you want (that is, indicate which suppliers should contain after the MERGER).

  Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?

• Report and the Tables Alias scripts

  Hi all

  I am running a report off MaxL Script and want to get the Alias. I use < REPALIASMBR 'Products' and it works very well. However, it is bring back the default Alias of Table. Is it possible that I can choose what Table Alias that is returned in the result?

  Thank you!

  Brandy

  Yes, watch OUTALTSELECT

• SmartView 11.1.2.1.103 make the selection of table alias "sticky."

  Apparently (but it is difficult to imagine) the alias table selection is not sticky. The default value appears in the 'Default' alias at least on ad-hoc connections table. It the sticky option is the best case scenario but assuming that there is no is it possible to 'None' by default? I can't use a macro approach and I can't delete the table alias alias 'default' due to the impact on the planning and the EN
  
  Thank you

  You attempted to set the table level alias connection by right-clicking on the private connection and selecting the menu "Set alias table"?

• Copy the Table Alias for a database of the ASO

  Hi all
  
  I use the Essbase Version 11.1.2.0.
  
  Is it possible to copy an alias of an ASO cube table to another table aliases of the same cube with MAXL?
  
  
  I know how to do it with EAS, but I don't know how to do with MAXL.
  
  
  
  I already tried this-> edit the 'HR_SB' object.' HR_REP'. ' Default 'type table_alias copy to 'HR_SB'.' HR_REP'. 'Alias_HFM'
  
  This copies the ALT file in the directory "applicationname\database". After that, you need to import this file in the database. It's easy to do in the admin console but I am facing some problems with maxl.
  
  I used the command:
  change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of charge of data_file ***\\HR_SB\\HR_REP\\HFM.alt table_alias
  
  I get the error message: / * Alias [Alias_HFM] already exists for the HR_REP database * /.
  
  So I tried to unload the table before loading:
  
  change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of unloading table_alias
  
  -> error message: / * dynamic aliases drop table is not supported in page outline mode * /.
  
  I have no idea what it means - any ideas?
  
  Perhaps it does not work for ASO cubes?
  
  
  Thank you, Bernd

  Try this after copying table alias

  change dabase 'HR_SB'.' HR_REP' table active alias 'Alias_HFM '.