May not know what is the problem with recovery DVDs

Similar Questions

• My iPhone says 5 c searching for service and I know I service someone know what is the problem with my phone?

  I need help

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Restart your iPhone or iPad.
  2. Looking for a carrier settings update.
  3. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  4. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  5. If you have another device, see if you can connect your business with her network to this place.
  6. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.
  7. Update your iPhone or iPad to the latest version of iOS.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

• BlackBerry smartphones I don't know what's the problem with him.

  Right, it's my first blackberry. Now, I've had for about a month now, and ubertwitter & app world worked very well. Last night, ubertwitter randomly decides to tell me "Network Exception trying to communicate with the service Twitter". I'm quite stupid when it comes to these things, and google does not help me much. So I thought, well I'll just reinstall it.

  Then App World decides to say "upgrade your service to a plan that includes browsing... "and tells me to contact my ISP. Now, I don't feel like calling India atm (I'm on 3UK), but I also know that I have a plan about me do anything, because I was able to access both for the months past. I never went over the use of the data because of this.

  Any help will be appreciated

  There was a thread that I was helping out with previously who had something similar happen. There is the person should communicate with its carrier b/c a maintenance book has been away on their BlackBerry.

  So to confirm your watch 3G or EDGE signal? If you go in manage connections | "" The service state is say it is connected via the mobile network "BlackBerry Internet Service"? You can try resending service books to your device in 2 ways:

  1. Connect to the BIS of your operator and go site in the section Service books. There you should see a button to send the service directories
  2. On the BlackBerry, go to Options | Advanced options | The host routing table. In this screen press press the button menu and choose to register now. See if you get a message to record a few seconds later. Then try to reset your device by removing the battery for 30 seconds

• May not know what is the error in my car wash tunnels

  I did a vi to the practice of the CLD of car wash sample question. And labview wrote there a missing assignment in each of my 10 tunnels. But I checked, there is an array of enum enter each of the 10 tunnels. Whence the error?

  I can't understand! My tunnels look exactly like that of the attached sample CLD answer.

  

  Hello

  Just move this Enum tunnel upward, you specify in the RED arrow. You can find a tunnel unwired. Just delete that. It's since overlap, you are not able to see.

  She's. All your error will disappear.

• How can I know what is the problem with my compaq Presario S6220WM?

  What does it mean when the computer screen says CDBoot?

  The extremely small, you mentioned, it sounds as if you have inserted a CD in the drive and the computer asks if you want to boot from it.

  For more help, provide more information.

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• What is the problem with kernel_task?

  Hello everyone,

  What is the problem with kernel_task?

  I explan: Macbook Pro early 2011 LION OS up to date.

  I bought 8 GB on China supplier, CRUCIAL...

  Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

  Well, I went back to a clean install, a manufacturing one, with nothing.

  Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

  Sometimes the kernel_task crazy sometimes not...

  Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

  Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

  I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

  So what?

  I bought something conivient on Support and friability so today he's dead?

  What should do?

  If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

  Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

  http://support.Apple.com/kb/ht2546>

  http://support.Apple.com/en-us/HT200553>

  The panic report should have "panic" in the name of the file.

  Kernel panics tend to come from 2 sources

  • Material:
    • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
    • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
    • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
  • Software
    • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
    • Other core 3rd party extensions are a distant 2nd.
    • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

  If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

  Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

  The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• What is the problem with Windows 7 Live Mail?

  What is the problem with Windows 7 using Windows Live Mail?

  When I type my emails using special characters, for example "$- + = % sometimes even Live Mail change my characters to a reverse with a top character."  And it it changes between the time wherever I sends it and receives the other person, so I never really know if they receive a message scrambled or not.  I never had this problem with Outlook Express.  What can we do about it.  I use this for business and it is absolutely unacceptible.

  Hello

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live,

  Windows Live Mail Forum
   
  http://windowslivehelp.com/forums.aspx?ProductID=15

• I agree with the CC. But I also have APS CS6. I get the message that the updates are available. But whenever I try to 'install', I get the message that it failed and the error code is U44M1P7. What is the problem with obtaining this update?

  Whenever I try to install I get message that he had failed. The error code is U44M1P7. What is the problem with this update?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Can someone explain to me what is the problem with Illustrator CS5?

  I can't, for the life of me, understand why this happens. If you look carefully at the images below, you will notice that the 'path' or a schema does not coincide with what is represented as a fill.

  I can work on my forms on CS4 and everything works fine.

  That seems to happen when I use pathfinder operations, or resize a set of shapes.

  What is the problem with my Illustrator?

  Please help me.

  

  Hi Enrique.

  It seems to me that the points can be aligned to the pixel grid when you develop. Hard to say without knowing the extent of your examples. I don't have it, but I think snap to grid of pixels has been added in CS5. Worth the drive. Or off uncheck.

  Peace,

  Lee

• What is the problem with this pl/sql code?

  What is the problem with this statement of the cursor? I am getting PLS-00341 error for her:

  CURSOR cur_rsource(p_sql_stmt IN VARCHAR2) IS
          SELECT plan_table_output FROM v$sql s, table(dbms_xplan.display_CURSOR(s.sql_id, s.child_number)) t WHERE sql_text LIKE '''%'||p_sql_stmt||'%''';

  How to solve this problem?
  
  Thank you
  
  Published by: PhoenixBai on December 14, 2009 14:05

  I don't have time right now to study exhaustively, but for me his vomit ORA-00942 table or view does not exist on this line:

      SELECT sql_id, child_number into tmp_sql_id, tmp_child_number
           from v$sql where sql_text like sql_statement||'%' and sql_text not like '%v$sql%';
  

  I am able to select from v$ sql in normal SQL as user I am compiling as, so don't know why it's complaing.

  Anyone know if there are certain restrictions on access to the views v$ through PL/SQL?

  EDIT: http://www.dbasupport.com/forums/showthread.php?t=22299

  Access to the views of $ v seems to be through a role - try giving explicit access to it.

  As SYS, you must grant select permissions on V_$ SQL (V$ SQL is synonymous with V_$ SQL) to your owner of the procedure. Just tested on my system and it allows him to compile.

  Published by: Cyn on December 14, 2009 10:30

• Anyone of you happen to know what is the difference with a certificate in certificate authorities roots of trust?

  Hi all

  I am trying to solve the mystery of the ICP and have a question about the certificate stores, it would be very cool to have answered. Anyone of you happen to know what is the difference with a trusted certificate root, Enterprise Trust, intermediate Certification authorities CAs, publishers, to the third-party root CA, Active Directory object and so on?

  And does it matter where the physical store? Is there a difference if you use the registry, Local computer, group policy, AIA and so on?

  I noticed that you use the CA store root of trust to validate the server self-signed https, but apparently not so simple with tokens, access control with the EAP protocol network and so on.

  Best regards
  Alex

  Hi Alexander,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have a question about the certificate stores on your Windows 7 computer. I will certainly help you to the query.

  I suggest you refer to the of the items listed below and check if this is useful:

  Operating a Windows PKI: Certification Authority certificate life cycle and renewals

  https://blogs.technet.Microsoft.com/xdot509/2013/05/27/operating-a-Windows-PKI-certification-authority-certificate-lifecycle-and-renewals/

  ICP-the key usage attribute

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/ms679125%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  If the link above is not enough, then please visit the link below to post your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• What is the problem with Muse since the last update 6. October. It crash again and again and again!

  

  This happens several times a day that Muse crashes again and again, and yet once, when I worked with Muse?

  -What is the problem with the Muse?

  Adobe Muse CC 2014.2.1 is released today which includes the fix for the reported problems.

  Please install the update: Release notes | Adobe Muse CC

  Thank you

  Sanjit