Tecra M5 - external monitor detected but not image

Similar Questions

• MBP: monitor detected but no image except by VGA

  I have a MBP of Mid 2012 running latest El Capitan.

  When I connect to an external monitor, it is detected correctly in views (exact name, resolution, etc.), but the monitor doesn't detect any image from the portable computer. I tried the DVI - D and DisplayPort with various cables and monitors with the same result, but a picture appears if I connect to VGA. It started in the past week.

  The built-in display does not work normally.

  Looks like a hardware failure in the computer DisplayPort connector laptop, as the pins are worn or something?

  Any other ideas?

  Hi johngirvin,

  Thank you for using communities Support from Apple. Sorry to hear that you had these display problems with your MacBook Pro. Looks like you've been on the right track trying to solve this problem. If you continue to have problems, you can find the additional steps described in the following article useful, up to and including contacting Apple Support if necessary:
  

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Hello

  I have an iphone 4 model MD128E/A

  7.1.2 IOS Software

  IAM a teacher at the University.

  I have a connection perfect with the ipad but not iphone 4

  I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Can I use the iphone 4 with the appletv?

  Thank you

  The iPad can be mirrored, your iPhone does not have this feature. The iPhone can use AirPlay, but not all applications are activated (up to the developer to do)

• Unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  I am unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  All security settings seem fine, an idea?

  Some messages do not conform to the standards of the Internet in the sense that they cannot be returned intact by their transmission.  The way around this is to use Message | Until the attachment, then they will be properly transmitted, since they will be attached.

  Steve

• VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him?

  I ran security Microsoft SCANNER and it says there: VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him? I ran malwarebites and it sees nothing

  Hi winfrey,.

  ·         Which antivirus program is installed on the computer?

  I suggest that you download and install Microsoft Security Essentials to see if it helps.

  Anti-Malware, viruses, Spyware Protection | Microsoft Security Essentials

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.

• Tecra A9 - external monitor black after closing lid

  Greetings, I looked for answers to this but can't find so far.

  I have a Tecra A9.

  My problem: I have an external display connected. Sometimes, when I get to work in the morning and open the lid of my laptop the monitor to the laptop and external monitor are black. I can restore the laptop using the shortcut key screen, but no matter what I can not do the external monitor to view anything until I restart. I tried turning power off and then on, by disconnecting and then reconnecting the data cable.

  I leave my machine all the time, do not turn off during the night. I have the ability to shut down/hibernate/suspend on closing the lid off.
  I have disabled all the management of the power supply for the monitor so that it turns off by windows.

  I am running Vista 32 bit Ultimate Business and have a Mobile Intel 965 Express Chipset Family. I checked Toshiba site for the latest version of the video driver Vista and have the latest installed. By checking on the Intel site, I learned that I have a custom Setup and you me advised to go to the provider's site for the latest version of the driver.

  This problem occurs only occasionally and I failed to pin what make it even except what happens sometimes all night, maybe after I have use connection remote desktop to access the remote machine.

  I think I might have a problem with the video card hardware, but of course I can't prove anything.

  Does anyone have any ideas as to how I test more?
  Thank you.

  Try to update to other drivers, such as the package added Toshiba.

  Updated the BIOS and try a new installation of Windows (run recovery) if possible.

• Tecra A9 - external monitor shows scratches during the use of the computer laptop pluged.

  Hello

  I heard at least Tecras A9 product witch scratches on the external display only 3 when the laptop is pluged. When you use the laptop with the battery, the monitor works fine. they tried to divide the monitor and power cables as far as possible, but still the same problem. When you use the laptop with a non-toshiba-AC adapter, the external monitor works fine.

  Hello

  In my opinion, you should visit the nearest Toshiba authorized service provider. They can plug in your Tecra external monitors and test. If the result is the same, I am sure that you will get free AC adapter replacement.

  Do not wait and discuss the days here. Contact with them and I hope they help you.

• external monitor display resolution not as an option

  I try to have an external monitor for MacBook Pro (the Captain). While setting up, I couldn't find the proper resolution (1920 * 1080 @60 Hz) in the display settings. I did a nd restart read a lot about this, but I couldn't find a simple solution on how to add a resolution in the option if it is not found.

  hope you can help me configure the resolution to the required resolution.

  After a screen shows what display preferences for the external monitor

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• External monitor adapter does not

  Hello

  I recently encountered a problem with my external monitor adapter. It worked very well until all monitors I put seeing flashes and the screen goes black. I tried to make all combinations of display configuration but the screen is still blank. When I plug the cable into the adapter, the monitor can receive a signal on my external VGA adapter, but cannot display anything (means when my external monitoris not connect it to any vga, it displays "Cable not connected", but when I attach my external adapter, the message disappears). Any suggestion to this problem? Is there a technician of Lenovo in this forum who can help me because I tried calling support, but I'm a stranger. I need to know if it can be fixed by formatting of Vista. Either way, my machine is a Lenovo Y410.

  Thank you

  Terrence

  Check the cable or re-install the graphics card drivers.

  If you think that it is hardware problem and goes to the format, try to restore windows.

• External monitor is recognized not it says "no signal".

  Original title: does not recognize external monitor

  I use an external monitor, which is a TV for watching movies via the port HDMI on my ACER Aspire 6930 AVOL 22 "1080 p.  He worked in this configuration for at least a month, but recently my computer does not recognize the tv.  It says "no signal".  I tried a friends laptop and the tv works as advertised, so I'm sure it's the computer.  Any suggestions?  Thank you.

  Well, I think that something to with my HDMI port/card does not work.  I discovered that we had a power surge from the other day, and I think that is what is happening.  He got zapped.  I found many programs that just don't have anything in them, and its been quite a process to get it all going again, but I can't get the HDMI port to work.  I got the VGA to work, but not the HDMI port.  I did the above a couple of times and made sure I had the correct drivers and latest, nothing helps.  Well.

• External monitor (projector HDMI) not recognized in CC AE or AE CS6 with the new Macbook Pro

  You have a very difficult problem that maybe someone can help me find a solution.  I had an old Macbook Pro (2009-ish) I was using with AE and my HDMI projector to do the work of projection mapping.  The laptop computer motherboard used recently (not linked, I don't think) but now I bought a new Macbook Pro and am trying to use the HDMI output to the projector as my external monitor in After Effects (I tried both CC and CS5.5 and CS6). Under Preview video it does not appear as an option to send to (the choices are computer monitor only or Firewire).

  I'm a mess that I'm supposed to do a show tonight with the installation I did many times with my old Macbook and AE and now can't do it at all. I have to be able to have the projector receive EI feed - and nothing I've done so far has helped. The system sees the projector, then why doesn't AE?  I can't drag the window of the program in the projector window space and expand - there must be exactly 1920 x 1080 in order for me align correctly.

  If there is Adobe TAPI people this morning, I'd CERTAINLY appreciate your comments, as well as any other person who might have had similar problems. It should work, it should be a no-brainer. Right now I'm running a new STANDARD Apple Macbook Pro with HDMI output and the latest version of AE CC with all updates done. Please, please help!

  Thanks in advance,

  Bill

  After Effects does not come with components for an HDMI output.

  Your other computer must have installed additional components that adds this functionality.

  See this thread for more information:

  http://forums.Adobe.com/thread/1006705

• iPod nano detected but not recognized, why?

  My wife has an ipod Nano 7 G. We have 10 Windows and iTunes 12.3.3.17. It worked fine for months. But today it has plugged his ipod, and he wiped all the music on the ipod, suffice it to say that she is not happy. She then unplugged, plugged in, and now she is ' ipod detected, but is not recognized.

  I uninstalled / reinstalled iTunes. I followed the process to update the driver. But it still does not work. What else can I do to make it work again. In its current form the ipod (just a few months) is essentially useless.

  If you have already tried to uninstall iTunes, you are probably not completely remove iTunes and software components.  This Apple document lists the components of the installation of iTunes and the precise order to uninstall

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version if iTunes

  https://www.Apple.com/iTunes/