MBP runs hot with view on via Thunderbolt

Similar Questions

• MacBook Pro mid-2012 running hot (MacOS Sierra)

  Hello

  I have a MBP mid-2012 13 inch with 16 GB. of ram and a 500 GB. SSD

  I had it set up with boot camp and dualboot El Capitan and MS-Windows-10

  Everything is working, all the features and functions in the two operating systems.

  I was very pleased with this MBP.

  Recently, I put a new battery in it and upgraded to Mac OS Sierra.

  Since then the MBP runs hot.

  It heats up very quickly.

  Is this a common problem with macOS Sierra?

  Or do you think that the NEW battery maybe causing the MBP get HOT?

  I use an adapter to power 85 watts OEM.

  The battery seems to work fine.

  Several demons as mdworker are running to set up the Sierra which CPU load until adjustment ended.

  You can check with activity monitor.

• My macbook air running hot and the battery drains quickly can help you with this problem?

  My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014.  Processor 1.4 GHz intel core 15Can you help with this problem?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• Dreamweaver (CC) running HOT - Can not use on El Capitan

  You just bought a MacBook Pro 15 "retina with i7 and 16G RAM last week, whenever I run Dreamweaver (CC) my laptop begins to operate the fan quite heavy and it warms quickly about 3 minutes after the start of the program. I have same files open. When I run Photoshop (CC), everything is fine. I've been watching the activity monitor and that Dreamweaver uses a lot of energy. Any suggestions? At this point, I can't even use Dreamweaver overheating so fast my computer after loading. With the help of brackets in the meantime. FYI, I am new to the Mac family, and I had no problems on my windows laptop.

  

  Install a temperature/speed control application.

  Set the activity to all THE PROCESS monitor and CPU to display values between high and low.

  Open Dreamweaver and when the MBP is 'hot', post pictures of both for review.

  Ciao.

• Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  No, but you can with an Ethernet one.

  (144234)

• CPU running hot

  Something is causing the processor to run hot. The fan is always on.  Had this problem a month ago with Parallels and it is resolved.  He now runs hot when Parallels is stopped.

  Look at the activity monitor to see what is the culprit

• MBP randomly Shutsdown with the previous issue-103

  Hello

  I have a MBP of 2007 with a spare battery. The MBP shutsdown without warning in a shutdown state. When restarting

  kernel syslog-k Sender | previous grep

  reveals

  6 July 14:13:31 localhost kernel [0] < reviews >: cause of previous stop:-103

  The MBP is not running on the battery, it is run on a MagSafe connector, connected to a monitor. The battery has 1 cycle, is fully charged

  Information on this charge:

  Charge remaining (mAh): 4222

  Fully charged: Yes

  Loading: No.

  Full Charge capacity (mAh): 4245

  The cell voltages just before closing (by logging in ioreg - n AppleSmartBattery | grep CellVoltage once per second have been)

  "CellVoltage' = (4083,4118,4078,0)

  The tension of the elements were stable and reports currently the ioreg

  | |     AppleSmartBattery + o < class AppleSmartBattery, id 0 x 100000221, recorded, matched, active, busy at 0 (0 ms), keep 6 >

  | |         {

  | |           "TimeRemaining' = 0

  | |           'AvgTimeToEmpty' = 65535

  | |           'InstantTimeToEmpty' = 65535

  | |           'ExternalChargeCapable' = No

  | |           "CellVoltage' = (4084,4119,4079,0)

  | |           'PermanentFailureStatus' = 0

  | |           "BatteryInvalidWakeSeconds" = 30

  | |           "AdapterInfo' = 0

  | |           "MaxCapacity' = 4245

  | |           'Tension' = 12282

  | |           "Manufacturer" = "DP".

  | |           'Location' = 0

  | |           'CurrentCapacity' = 4222

  | |           'LegacyBatteryInfo' = {'Amperage' = 0, 'Flags' = 5, = 4245 ' ability', 'Current' = 4222, 'Tension' = 12282, "Cycle Count" = 1}

  | |           'FirmwareSerialNumber' = 1

  | |           "Stacks" = Yes

  | |           'PackReserve' = 0

  | |           "CycleCount' = 1

  | |           "DesignCapacity' = 4400

  | |           'OperationStatus' = 34880

  | |           'ManufactureDate' = 18511

  | |           'AvgTimeToFull' = 65535

  | |           «BatterySerialNumber "= «»

  | |           "BootPathUpdated" = 1467810988

  | |           'PostDischargeWaitSeconds' = 120

  | |           'Temperature' = 2930

  | |           "UserVisiblePathUpdated" = 1467811107

  | |           'MaxErr' = 2

  | |           "ManufacturerData" = < 0000000000000000000000080000 >

  | |           "FullyCharged" = Yes

  | |           'InstantAmperage' = 0

  | |           "DeviceName" = "bq20z95."

  | |           'IOGeneralInterest' = 'it is not serializable to IOCommand.

  | |           "Amperage" = 0

  | |           'IsCharging' = No

  | |           'DesignCycleCount9C' = 0

  | |           'PostChargeWaitSeconds' = 120

  | |           "ExternalConnected" = Yes

  | |         }

  He a buy a dud spare battery?

  There he missed everything extra batteries for a 2007 MBP more or is the only option to bin the laptop?

  The problem could also be caused by a faulty MagSafe, power from the LED display power?

  (I have already reset the SMC)

  Discovered that the MagSafe connector on the LED display showed upward under an Information System-> system-> hardware-> power report

  Related:	Yes
  ID:	0x0000
  Review:	0x0000
  Family:	0x0000
  Serial number:	0x00000000
  Load:	NO.

  But a power supply adapter 85W presented themselves as

  Related:	Yes
  ID:	0x0100
  Power consumption (W):	85
  Review:	0x0000
  Family:	0x00ba
  Serial number:	0x006ce428
  Load:	NO.

  After following the instructions to notebooks Apple: Troubleshooting MagSafe adapters - Apple Support and cleaning the MagSafe LED plug it now shows the system upward as (the LED on the MagSafe adapter works, so probably the ground terminal has had a problem)

  Related:	Yes
  ID:	0x0100
  Power consumption (W):	85
  Review:	0x0000
  Family:	0x00ba
  Serial number:	0x00778b8c
  Load:	NO.

  (different serial number of note)

  Since that no random stops (5 h), where, before many in the same period.

  In which case it means the - 103 stop cause means that there is a voltage drop detected by the SCM controller on the battery or the power adapter.  Leave the phone on the night to verify this behavior.

• Satellite A350 run hot?

  Hello.
  I think the purchase of A350 laptop computer.

  I looked in the staples and it was running hot. Is this normal for Toshibas or was it just this laptop?

  Rogi.

  Hello

  > three of my friends have the same problem with different models
  Just a matter of first;
  The laptop stops automatically during execution of some high performance applications?
  ISN'T IT?
  Well, in this case the temperature is NOT too high because laptops are equipped with different sensors that would require cell phone to automatically close to prevent the equipment from damage!

  You should know that most recent generation of laptop is equipped with high-performance CPU and GPU which create a lot of heat dissipation!
  It is NOT SERIOUS that that's all by running a game or watching a movie, you will notice a higher temperature on all laptops portable computer from the manufacturer

  Sometimes, however, the temperature can appear at a critical level if the cooling modules are clogged with dust and debris. In this case the cleaning of the cooling modules would be useful. I clean my cooling fans with a jet of compressed air.

  Greetings
  Jimi

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• Running hot

  Salvation;

  I just had my HD to my MBP replaced (by Apple). Now, it seems to work more hot than before. The fan lights up minutes after the start, and he feels still hot with the fan works when she was in mode "sleep" for a while (half an hour more?).

  A matter of concern?

  First try a reset SMC:

  https://support.Apple.com/en-us/HT201295

  If there is no change, install the speed of fan/emperature control application.

  Open the ACTIVITY MONITOR all THE PROCESSES and CPU to display values between high and low.

  When the MBP gets hot, post pictures of both for review.

  Ciao.

• Migration of PPC-based Mac to all new MBP running El Capitan

  Can use Setup Assistant to migrate files from a Mac to Leopard PPC processor to a whole new MacBook Pro running non-retine El Capitan cause problems? The support article 'Move your content to a new Mac' (https://support.apple.com/en-us/HT204350) said the old Mac should run 10.6.8 Snow Leopard or later, but that has not been my experience on November 24, 2015.

  When my new MBP came directly from the China (I paid the extra $15 for express delivery) and I was starting for the first time, I plugged on my old based on the PPC PowerBook G4 10.5.8 Leopard and when I got to the screen "you want to transfer your data", I chose "transfer from a Mac", hit continue and expected to see an error screen.  Surprise, surpise, transfer stepped forward, and all my accounts and passwords have been transferred to the MBP.  I used a Firewire 400 to 800 cable to connect two computers and started the G4 in target Mode.  The only 'problem' I have noticed (if that's the right word) is that my new MBP is found with the same name as my old G4.  I expected to wonder on behalf of MBP somewhere along the line, the installation procedure.

  Then I came across two problems related to the system with the MBP, but I don't know if they were related to the transfer or were part of a problem with the original, factory system or the 10.11.1 updated, which I fell right after the end MBP of the initialization of the first time.  The first problem was the MBP would not print at one of my printers Epson (Stylus CX7400 and Stylus Photo R280), even after downloading what it determined were the correct drivers. I would get an error message "failure of the filter.  The second problem was that the MBP would not cCREATE a bootable of El Capitan Installer using the Terminal and the command SUDO appropriate.  Both these problems disappeared after I reinstalled completely El Cap 10.11.1, but I still want to know if transfer in my info to the G4 PPC-based using Setup Assistant might have caused or contributed to them.

  Very likely that the system software and some of the apps would not be compatible with a mac intel. Music and photos would be. And also movies. But all third party apps will need to be updated to work. If you have used assistant migration there is a screen where you can choose what are the files to be transferred. Ether transfer you the contents of the entire hard disk or your entire home folder. That's how you're done with the same user name. Relocation of El Capitan straightened some of them. You should always go through and remove some things.

• Why does'nt windows developed defender running automatically with windows 7?

  Why does'nt windows developed defender running automatically with windows 7?

  Hi GRL999,

  Welcome to the Microsoft Answers site.

  You can add, delete, enable, or disable a startup program in windows 7. Follow the steps mentioned below.

  Method 1:

  1. open the settings menu of the program.

  2. Add the program to the startup -

  Select the type option to run at startup of the program.

   

  3. to remove the startup - program

  Deselect the option type to run at startup of the program.

  Method 2:

  1. right click on the exe of the program to run at startup, or opening at startup and click create a shortcut.

  NOTE: This is the shortcut you add to the folder of boot Option one or Option two below. Skip this step if you only remove a shortcut from the startup folder.

  Single user:

  NOTE: The startup of the single (current) user folder is a hidden phone folder to the:
  C:\Users\(user-name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click Open or Explorer or in the line of the Start Menu search box, type : startup of the shell and press enter.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

   

  For all users:

  NOTE: The startup folder all users is a hidden system folder:
  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click open all users , or to explore all users.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

  Method 3:

  1. open the Start Menu.

  (A) in the search line, type msconfig and press enter.

  or

  (B) open theControl Panel (all items view) and click the Administrative Tools icon, and then click System Configuration. Close the control panel and the windows administrative tools.

  2. If prompted, click on continue for UAC prompt or type the administrator password.

  3. click on the Startup tab.

  4. to disable a startup - program

  (A) select a listed startup program and uncheck the box.

  (B) repeat to disable more listed startup programs.

  5. to allow a startup - program

  (A) select a listed startup program and check it.

  (B) repeat to allow more listed startup programs.

  6. to turn off all startup programs listed -

  (A) click the disable all button.

  (B) proceed to step 9.

  7. to enable all startup programs listed -

  (A) click the enable all button.

  8. click on apply and OK.

  9. click on the button to restart to apply.

  Note: This will restart your computer immediately. Save and close everything you are working on the first.

  For more information about Windows Defender, see the items listed below.

  Enable or disable the Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender real-time protection

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-real-time-protection-on-or-off

  Schedule when Windows Defender scans your computer http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-when-Windows-Defender-scans-your-computer

  Using Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/using-Windows-Defender

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start the computer to black screen and the computer runs hot

  original title: sick Vista laptop

  My daughter portable computer began acting strangely very yesterday.

  Once connected, I get a black screen and a cursor.  The system seems to work at full speed, because I can hear the fan, and it runs very hot.  No matter how long it sits, the desktop does not appear.

  I can use Ctrl-alt-del to display the Task Manager.  The list of processes is limited to the process of the current user, and none of them use important CPU. If I click on 'See the process for all users', taskmanager freezes and I have to disconnect to get rid of him.

  Using the Task Manager, I can kill the process Explorer and then start it again, date at which I get my desktop.  However, it is still running hot and noisy.  With the help of SysInternals ProcessExplorer, there is no process using any important CPU.  Most of the time CPU is reported as inactive.

  I don't know what to think.  A boot loader took over the system?  A hardware problem?  OS corrupted files?

   

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Toshiba L750 running hot

  My Toshiba L750 (H W7 Premium 64) 6 GB of RAM is running hot fan at full speed all the time RAM to the 60 to 85% 80% CPU

  Only new facility that W7 first of HD, 2 from CD, same thing, does not improve, windows do not update, it used to be 100's of updates once the new facility, now does not work. IE (11) CPU sur.5 Gig the same Firefox running. Without open anything he just Office RAM is at 61% 42% CPU (formerly simple numbers.)

  Running Norton (trial) malware bytes, CC cleaner MS essentials and system Advance care 9pro

  Are there problems to be fix? I'm afraid to cook this computer

  Original title: W 7

  Post proposed by the host to the appropriate forum category (for Windows |) Windows 7 | Hardware & drivers for Windows | Windows 7 | Failures of performance & system). ***

  If your CPU is running at 80% which is abnormal, so you must work on why is finding and fixing that.

  You can open the the Task Manager (Ctrl-Alt-Del) and on the process tab active check box in the lower part called "Show processes from all users", then click on the CPU column header to sort and look for a minute.

  When things are although you should see the system idle process above.  The system idle process is actually how much free time so your CPU has more the better for this process.

  If you see a svchost. exe process up and equips using too much CPU you probably have a condition known involving the Windows Update.   It is normal to see several svchost.exe process run much, but they can't do much on a normal system.

  A symptom of the problem Windows Update is a svchost.exe process a lot of large amounts of RAM and CPU and fan works all the time at high speed, trying to keep it from overheating.  Another symptom we an update of Windows which seems to do nothing or takes too much time (hours +++) to retrieve updates.

  And if you just reinstalled Windows for some reason you need especially to solve this problem with Windows Update ASAP – known then solve any remaining problems.

  In this case, you must apply the suggestion of Volume Z:

  Windows 7 update problems? First read this.

  If and after that there's always a process consuming large amounts of CPU you need to tell us what it is or after a screen shot so we can see what it is:

  How to include a screenshot in your message

• USB problems with view 5.3

  I have problems with view on an Atrust W100 5.3 zero client attempts to use a Magtek USB card.  When I plug the blow of the card into a USB port and the test with the notebook, the device works, but when I try to slip something in QuickBooks POS there are missing characters and the card is not recognized.  I contacted MagTek and they pointed me to a download that I can run and slow the flow of data entry, however when I try to run it it is unable to recognize any USB device.  Is there anything I can do to get this MagTek card reader to work with the view 5.3?

  Thank you

  Looks like you're not actually redirecting the USB device, and instead it is considered a local keyboard to the zero client, with the keystrokes that results from being sent all over the office. Teradici have a tech support article detailing how to make USB devices which, by default, are kept up the:

  https://TechSupport.Teradici.com/ICS/support/KBAnswer.asp?questionID=616