McAfee will not register

Similar Questions

• HP ProDesk 400 MT of G1: Why my G1 to 400 HP product will not register online?

  My NEW HP ProDesk 400 G1MT (product # K1L42UT #ABA) will not register online with HP. On a suggestion to help, I tried to enter the name of the product without the TM and, after unsuccessfully, attempted to enter the number of the product without #ABA, always without success. Whenever the data have been entered, a message "no product" popped up.

  HP technical support cannot provide a reason for my inability to register the product, but uses the same information and found my product in its system.  Suppport: HP's is not allowed to register for my PC.

  So I have a problem, it will be very difficult to get online assistance!

  Martin, welcome to the forum.

  I asked a representative from HP to help you with your problem.  You should hear from someone soon.

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• fingerprint reader will not register in but will be acess web pages

  fingerprint reader Windows will not register on windows, but will say acess pages web digital fingerprint biometrics registered.

  Hi Mantious,

  1. What is the brand and model of the computer?

  2. you receive any message or exact error code?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Follow the methods and mark the question below:

  Method 1:

   

  You cannot connect to a computer by using the fingerprint reader:

  http://support.Microsoft.com/kb/917389

   

  http://support.Microsoft.com/kb/885193

   

  Method 2:

   

  I suggest you to remove and add the fingerprints of the link below logons and check the issue.

  How to add, change, or remove a fingerprint logon by using the Fingerprint Logon Manager for use with the fingerprint reader:

  http://support.Microsoft.com/kb/899626

  I hope this helps.

• I have Adobe CS5 for PC but must transfer on Mac. But my serial number will not register. Please help if possible.

  Hello

  I have CS5 on my PC and that you have already downloaded the file on my Mac, but the serial number will not register correctly.

  Please see:

  https://helpx.Adobe.com/x-productkb/policy-pricing/Exchange-product-language-OS.html

  I hope this helps.

  Kind regards
  Megha Rawat

• bought new in shrink wrap will not register

  I bought a new one in packaging molding 4th gen Apple tv, I can't seem to register with Apple? Will not take the entry date

  You need an internet connection, and the router must not block the Network Time Protocol, UDP on port 123. Search for Services or protocols in the settings of the router. Some people get around this problem by creating a point of personal interest by using their phone, set up the ATV to use, then change to their network after installation.

• Dreamweaver cs3 will not register

  Hi all

  I recently bought a copy of dreamweaver cs3 and everything went smoothly until the end where you must register the product and he says 'we are unable to connect to Adobe to regret your product.

  1.I have internet connection

  2 java script enabled

  3. I clicked on the button register.

  How to solve this problem?

  Thank you for your time!

  CS3 is well outside the 'window of support' where recording would have mattered.

  If the serial number has been accepted, there is nothing to worry about, as far as going to the trial period. It will not be stopped after 30 days without registering. Registration had nothing to do with how the product worked.

  I never registered CS3 or CS4 and up to a little more than a year, when I finally deleted them for good, they were installed without problem.

  $75 is in the "too good to be true" price range. Make sure that you run a solid a-squared Anti-virus program, in case you've been duped by one of the many swindlers eBay there sell software cracked in legitimate appearance package.

• iPhone 6 will not register in iTunes

  My iphone 6 will not enroll in itunes. No doubt connects with the PC (Dell Inspiron 23 model 5348).  Think that there is problem with the Apple driver. Can anyone help?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• laptop HP 11 inch flow: keyboard on laptop will not register key strikes

  My keyboard work when I get the password to unlock the computer but other that I can't type anything.  The laptop makes a clicking sound when I hit the keys, but it will not type actually.  The mouse works fine and I can access it online, but only if I'm going through the history of the sites that I have already visited.  Please help, I use this laptop for my school work during the day and cannot afford a new right now.

  Thank you

  Hello

  As the keyboard works until you connect, check the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the "ease of access Center.

  Select the option "make the keyboard easier to use".

  If there is a check mark next to 'Turn on filter keys', click the box to Remove , and then click apply and then click Ok to save this change.

  Kind regards

  DP - K

• My canon 450 printer will not register as 'on '. It is a new problem.

  I just finished a scan of my canon 450 in my laptop. I try another analysis, but it is not save as 'on' in my laptop. I tried to change ports and it works, but it will not show always known as 'active' in my laptop.

  Hello.

  If you have the MP450, make sure that the printer is connected directly to your computer via USB.  Avoid using extension devices or hubs when connecting.

  If you continue to have difficulties, find more help contact us.

• Drive CD-ROM/DVD-ROM of ATAPI DVD W DH16W1P ATA will not register in Vista

  I use Windows Vista.  I had a problem with the CD-ROM/DVD-ROM drive.  It will not save and it will give me information "invalid MS-DOS...". "in a dialog box.

  The drive is an ATAPI DVD W DH16W1P ATA Device.

  Y at - it a virus?  I installed Norton 360 2010.  Cleaning the registry would have something to do with this problem?

  * original title - my CD-ROM/DVD-ROM drives will not save the files *.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Media Center will not register a particular channel, but all other records very well

  Hello, I can not Media Center to record a particular channel unless I am diverted listed steps below.  I get all the live channels.

  -the channel, I can't save is 30.1 in Memphis, TN (subsidiary CW) channel

  -My tuner: AVerMedia AVerMedia Duet - PCTV Tuner (A188 - white box) Interface PCI-Express x 1 MTVHDDUWB

  When I try to record a program at any time on channel 30, Media Center loses signal.

  While playing with it, I discovered that I can click to save while watching channel 30, then after that Media Center loses signal, follow these steps:

  Reach

  Settings/TV/TV Signal / Scan for multiple channels

  So, I have to empty the scanned channels and re-scan.

  Then it will start to record the channel 30.1.

  Help, please!  Why Media Center will not record 30.1 without all this trouble?

  Thank you

  Kris

  Go to settings-guide-add missing channels. Type in right channel # (like 8.1). Then put in the right frequency for the over-the-air station (35 in my case). You can find this info here (http://www.antennaweb.org/aw/welcome.aspx) if necessary. Now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists. Change the source from the list to the channel that you have problems with. Next pass parameter-signal digital tv signal strength and a Coachman television that did not properly record to remove the Guide channel. This will fix your problem.

• Satellite L750 will not register the external devices

  About a few days ago my wireless, a M325 Logitech mouse has stopped working. I replaced the batteries and conducted a test with the official software and has determined that the USB port was not read. Shortly after I noticed that my iPod wouldn't sync or recharge and does not open in Windows Explorer (I use Windows 7).

  Also none of my SD cards will play on my computer.
  Please help, it's very frustrating and I wish that it be fixed as soon as POSSIBLE!

  Have you tried to roll back the OS to an earlier time when everything worked OK, just for test.
  What you can try is to reinstall the chipset driver.

  Please test and post comments.

• G6 cracked screen and the external monitor will not register. Quick key maybe?

  HP Pavilion Notebook PC Windows 7 #aba a4a93ua g6, my screen cracked when she fell to the ground, I plugged it to my office mmonitor via monitor cable 15-pin. Monitor register if we are in safe mode. Is there a guest key to use? Feature key guest did not work. on this model, the screen button is f4.

  Hello

  You get any display on your external monitor if you press f4 once, then press the right arrow and press enter?

  Kind regards

  DP - K

• McAfee will not download say my version of windows is not compatible

  I don't know what version of Windows, I need to download Mcafee. When I try, I get the answer that I do not have a compatible version.

  Help please.

  David Watters

  I also have tapes of the difficulties in one of my email addresses I get the answer that there is a problem and giving the code number 55

  Help, please!

  David Watters

  Hi David,

  What version of Windows are you using?

  I don't know why you want to spend money on McAfee when you can get the MSE, which is far superior, for free.  In any case if you want to keep McAfee, you need to talk to them.  Try here: http://www.mcafee.com/us/about/contact-us.aspx.

  For the e-mail problem, you must contact that your e-mail service provider (Comcast, Verizon, Yahoo, Hotmail,...) and discuss the problem with them.  They should be able to determine if this is a problem at their end or a problem with your installation and help you set up correctly.  This is especially true if you can successfully connect to other e-mail accounts.  It may have been hijacked or their server may be down.  What gives Code 55 and exactly when does it occur?  Provide the word accurate and complete error message including all codes.  What type of program you use to access this email account?  This program accesses other accounts of e-mail successfully?

  I hope this helps.

  Good luck!