MCE tv Media Center not display?

Similar Questions

• Media Center not display or record one channel. Signal OK

  I have an ATI tuner card in a desktop under Vista Home Premium PC.  When I run Setup of Media Center, he finds all the channels.  When I select in this case channel 56.1 (or 56.2 and 56.3) I get nothing.  As a result, I can't save this channel either.  I'm in the Los Angeles area, with a roof antenna, the signal strength is not the problem.

  If I use the ATI application, the channel comes very well and records too.

  I have a laptop running Windows 7.  I just bought a key USB from Hauppauge.  Windows Media Center detects all channels, and on this configuration, I can view 56.1 etc..  BUT, when I select a program to record from the EPG, it not save and give an error message that there is no signal.  If I look at the same channel when a record event program starts, the screen goes black, and the level of the signal LED on the USB turns off.

  As with the other computer, the application supplied with the device works very well on the channel in question.

  On both computers, I tried to manually add the channel (the physical channel is 32), no luck.  All the other channels, with the exception of the 56 works very well.

  My conclusion is that the electronic Program Guide to be a mistake for this channel.  As it does on two different computers with two different tuners, two different antennas and all other channels work fine, I don't see how it could be a hardware problem.

  For any help or suggestions would be most appreciated!

  Hello

   
   
  Method 1:
  You can also create a new user account with administrative privileges and try to save channel in Windows Media Center. If it works fine, it means that the other user account is damaged.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Access the link below and follow the steps to fix a corrupted user profile: http://windows.microsoft.com/en-US/Windows-vista/Fix-a-corrupted-user-profile
  
  Method 2:
  If the problem persists, you can try the steps and check:
  a. go to settings-guide-add missing channels.
  b. type in right channel # (like 8.1).
  c. then put in the right frequency for the station live.
  d. now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists.
  e. can change the list source to the channel that you have problems with. Then go to tv setting-tv digital signal signal strength.
  f. then UN check channel which did not properly record to remove it from the guide.
  
  You can access the link below and follow the steps to solve the problem with the recording on your Media center.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.

• Error message Windows XP MCE in Media Center - error PID = 0 x 864 (2148), Thread id = 0x9e0 (2528) with ATI 650 Pro

  I have an ATI 650 pro tuner that I recently installed in my XP MCE SP3 edition. Whenever I try to access live TV, Radio or when I try to configure, I get this message-"EHShell.exe - Common Language Runtime Debugging Services! Application has generated an exception that could not be treated. Process ID = 0 x 864 (2148), Thread id = 0x9e0 (2528)
  Click OK to close the application. Click on CANCEL to debug the application. "If you press OK, I get the message repeated, and the program ends. If CANCEL is pushed, I get this message, "Registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0 x 2 (2). Cordbg.exe! a 0 x 864 click try again to assign the process wait while attaching a debugger manually. Click Cancel to cancel the application of JIT debugging. "I can't find any information about this error on the site or the site of ATI/AMD. The Media Center included with the map works fine, but it's a pain having to go between the two, as the ATI version does not support or be able to play music files. I have the latest drivers and reinstalled the card many times. I have another computer with VISTA 64 bit - the card ran very well. I've upgraded to Windows 7, 64 bit - the card ran very well. I have it out and installed in the my son computer running XP MCE and encountered this error. According to ATI card should work fine.

  Nothing works. But at least now I know why. The CODECS provided by ATI are not compatible with XP MCE (they claim they do, but if they do not, they are not software of care-it). After searching around, I finally found some that worked, but only after I had installed a comprehensive system. After a bit, I guess the resgistry became a litte crowded and absolutely nothing can fix this. After you have reinstalled THREE TIMES, I finally found that working codecs -http://shark007.net/ (work with XP Vista CODECS) to FIRST USE CELLES-CI! If you crowd with too many CODECS NOTHING WORK SHORT OF A REINSTALLERA! (at least that I have found)

• Windows Homer Server Media Center not showing the new files I downloaded

  So I installed WHS2011 and thought that the library would easily work. It seems that the new files I put on the server are not get updated when I try and view them through the Media Center. Also when I serach for libraries on another device, it shows me two homeservers, one who say no files present and the other who has files (but does not update the index!). What is going on? (the file types are the same as the other files that are appearing fine)

  It is a basic installation, the only change I made is to move the directory to a new hard drive and update the WHS settings to point to the serverfolder updated on the new hard drive.

  I checked the settings on the media section of sharing control panel and it's on, I also checked on the dashboard and the media of Stentor is enabled.

  Why are my new files not updated in the index?

  Why two media servers on my other devices?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the forum Server TechNet for better assistance.

  http://social.Microsoft.com/forums/is/whs2011/threads

  Thank you.

• Windows Media Center is displayed when I try to open a PDF file from a web site

  Original title: when I'm on the internet trying to get information through a pdf file box will appear and ask to open, save or cancel. I click to open & so it go, s for microsoft media center what can I do to get the pdf file

  trying to get information from a webb site, click to serch & a box at the bottom just asking I want to open, save or cancel, I click to open it. Then heading

  Midea center Microsoft, no info no pdf don't file, how can I stop it.

  If you do not have a PDF Reader installed, you must install a PDF reader to open and view PDF files.

  Are two of the most popular to install Acrobat Reader or Foxit Reader - so you will be able to view the PDF files.

  Both are free:

  http://get.Adobe.com/reader

  http://www.foxitsoftware.com/PDF/reader

  If you do not have a PDF Reader installed:

  Default program to open files of Type with the value

  1 right-click the PDF in Windows Explorer, select "open with...". »

  2. click on the program that you want (if not in the menu, you will need to search for it).

  3. make sure the "always use the selected program" is checked on the bottom of the window.

  4. click on OK.

  This type of file should always be opened in this program.

  Or, you can follow the guides on the page linked below.

  Change the programs that Windows uses by default:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• Windows Media Center is displayed when you try to open a zip file

  When I try to open a zip file to transfer files from my mp3 player to gamefaqs.com, windows media center opens upward, why is it happening? I'm just trying to get a saved game file to my friend, this usually never happen before, because the file zipped arise, now it displays an icon of the page with the logo of windows inside, I'm really confused and I need help to change this back to normal when the zip file only arise

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select ZIP and start the process to restore the file association ZIP and that should fix the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Center not included in Vista Home Premium on laptop Wal Mart.

  Is there a way to install WMC on a Vista Home Premium machine if it was not included in the original installation?

  Is there a way to install WMC on a Vista Home Premium machine if it was not included in the original installation?

  Are you sure he isn't here?

  Excerpt:
  Windows Media Center is included in Windows 7 Home Premium, full, professional and business publishing; and Windows Vista Home Premium and Ultimate.

  Source: http://www.microsoft.com/windows/windows-media-center/get-started/default.aspx

  Try this first:
  Start button > Search box, enter ehome > doesn't show eHome upward at the top left?
  If so, click on it > scroll to find ehshell.exe > until it clicks. This is your exe Windows Media Center.

  If you don't REALLY have it...
  Download Windows Media Center 2009:
  http://www.BrotherSoft.com/Windows-Media-Center-270441.html

  t-4-2

• Program guide Windows 7 media Center not updated

  We have very little data to guide our Guide was date of 01/01/13 end 22:00 it's DVB-S Astra 28.2 East, 250282 Im in the United Kingdom. We have a few bits of information of courses and the next on 3 or 4 channels BBC1 Channel 4 etc, but that's all.

  I reread the TV signals, deleted the directory epglistings and re downloaded, I ran the ObjectStoreRecoveryTask, I ran MC Update, Ive tried to disable the firewall. The data seem to download but Media Center does not load the data. Nothing works.  I cannot now schedule new recordings or much to watch TV Online. I spent hours trying to understand what is happening.
  UPDATE: seems to me now have the curriculum and the next to most of the channels but nothing further.  The guide to update really slowly?  If I leave it will pick up the data possibly?
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/23/t/103680.aspx
   
  Yes, should work now.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Media Center not updated guide data

  I tried to restart the Media Center, but when he tried to make a new configuration of the tv he said data could not be downloaded and that it would use existing data.  This must have been the place that is the problem. What should I do now?  My guide data expires tomorrow.

  On Monday, July 20, 2015 19:24:43 + 0000, Janewc wrote:
   
  > I tried to restart the Media Center, but when he tried to make a new configuration of the tv he said data could not be downloaded and that it would use existing data.
   
  restart and try to TVSETUP with a ZipCode nearby. If you still have a problem
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code
   
  Note: You may need to create an account/login to see the comments link on the
  left.
   
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows experience
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Windows 7 pro. Media Center not installed

  I just installed Windows 7; However, Windows Media Center has not been installed by following the default installation instructions. How can I add Windows Media Center on my pc?

  I could solve this problem by installing the pack of media on your site (sorry I don't have the URL). I still don't know why it installs does not by default. I have a sound blaster Audigy 2zs that had conflicts during installation, I guess it could be a possibility.

• Windows Media Center not opening

  Every time I open Windows Media Center, it says windows checks for a solution for this problem.  Then it closes. Media Center does not open.

  Hello jodoloy,

  Thanks for posting on the Microsoft answers Forum.

  I uninstall and then reinstall Windows Media Center, to see if that helps to clear all corruption.

  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
   
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.

  Now you are able to open Media Center? If this isn't the case, then go to the event viewer and look for the application event log. See if there are errors for Media Center and then then list them here.

  Please answer back with an update and let us know the result of your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Not possible to burn a video in Windows Media Center - not enough space

  original title: windows media center

  I am running Win7 pro on a 40 GB SS HDD. When I try to burn a video, it says that there is not enough space on the C: drive for temporary storage. How, if possible, can I change temporary location in one of my 2 TB drives?

  1. left mouse, click on Start Menu Orb

  2. right mouse click on computer

  3. left mouse, click Properties
  4. left mouse, click Advanced Properties
  5. make sure that you click on the advance tab
  6. left mouse, click environmental properties
  Now there are a few more steps and the tutorial that I found on another site will guide you more now you change the temporary folder to another drive called D: or anywhere where your 2 TB drive
  http://forums.Overclockersclub.com/index.php?showtopic=184591

• Why Windows seems to work very well, but Windows Media Center not?

  Hello

  Today, I was with my Home Theater PC (HTPC) to record TV. Everything worked well. I wanted to watch a YouTube video when I was recording was completed. When I went on YouTube, there was no audio data.

  I use a HDMI from the HTPC to connect to my Pioneer VSX-50. While watching the TV show, the VSX-50 would show he was getting audio to 5.1 channels as it should. When I go on YouTube, all the sound elements would not pass, no audio signal is sent to the VSX-50.

  So I had a slight problem when it seems that Windows and Windows Media Center try to run the sound completely different from each other. And I went to my "manage Audio Devices" set up so that Windows would go the 5.1 audio channels (I think that until then he was established as stereo?). Once I did, I was able to get a YouTube sound very well. Then I went back to Windows Media Center. Media Center at the start, that's fine, but when I try to watch live TV or any recording, sound glitches (she repeats a second 1 loop repeatedly while video continues to play as if it's good), then he falls all together. After the sound glitch, my VSX-50 shows no audio signal is sent to the receiver, and I can't he come back! It really frustrates me!

  Any ideas?
  -Andrew

  Hi André,.

  Visit this link, it worked for me.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center