McKey external hard drive recognized a hard drive in vista, software cd will not load and run, it goes to my computer and can be open, but not installed.

Similar Questions

• HP C7180 printer driver / software download will not install network printer on Vista 64-bit.

  The printer is visible on the page computer & devices & also in the router configuration page, however during installation becomes 2/3 of the way through it asks you to choose the printer that you want to install and the printer is there and you click on it, then he asks how you want to install, wireless or directly connect with a cable to the router and you have chosen the cable the following page opens and a progress bar appears and it stops and says it can not a printer, then he ends by installing... its frusting because it leaves no driver in Device Manager and all other software it installs, does'nt work... Tried different configurations to install 7 times... No good must always uninstall it... You can buy a cd of HP for $10, but the version of the software on the cd was released in 2007. the 2009 version which you can download just will not work... Any suggestions... Please direct any replies on the forum, or personally to * address email is removed from the privacy * ... Thank you

  Bob Starke

  PS-4months have passed and several updates KB - took the risk and installed downloadede IE9, then ran an SFC... Still corrupt system files... Uninstalled it & presto - no file corrupted... Now the case #1165316803... have not yet heard back... Ho-hum...

  Hello

  • Have you tried to connect your printer manually (not through the router, but via a USB connection)?

  The problem is related to the HP software. Then I suggest that you contact HP support for assistance.

  http://WWW8.HP.com/us/en/support-drivers.html

• All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10

  Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.

  I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.

  I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.

  Thank you.

  Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having errors in the print driver. I would like to help!

  I recommend to remove the cartridges ink and starting by a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend running the HP Print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• The driver for my GL1 Camcorder will not install.

  The driver has charged several times in the past, but right after that I uninstalled a program of edition of smoking. I suspect that the driver is included in Vista. Canon offers no support for firmware for this device.

  Hello
  Yes, I completely agree. Please see this link. I think that it is the version of Windows Movie Maker you want.

  http://www.Microsoft.com/download/en/details.aspx?id=34

  I hope this helps!

• Error: "device driver will not install" when you connect Ipod touch to my computer

  Original title: Ipod touch

  HI, my Ipod touch is not recognized by my laptop. He says that it not install the 'device driver '.  Any thoughts on how to address this... much appreciated.

  Hi matthewherron,
   
  -What version of the operating system are you using?
  -Other USB devices recognized without any problems?
   
   
  If it is Windows XP that you are using, run the fix tool provided in the link given below and check if it contributes to the issue of fixing.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• After you have installed a second drive, computer will not install updates-error code 0 X 80070011

  Original title: it seems that since the installation of a second drive hard, PC will not install updates. They continue to fail.

  HP pc running windows 7 Home premium. error code 80070011

  Hello

  ·        What updates you are trying to install on the system?

  ·        What is an update of the application or a Windows update that you are trying to run?

  ·        If it is an update of the application, where the application, first hard disk is installed or the second drive?

  Error 0 X 80070011 occurs when you try to update any application which is not present in the location.

  For more details, see the article mentioned below.

  Error: ERROR_NOT_SAME_DEVICE (0 x 80070011)

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/a2a6876d-eb2e-4238-98a9-4933ad5da996

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• Windows 7 will not install PNY 1 GB flash drive. (who has worked in the past)

  When I tried to use my flash drives today that they do not work.  When I go to Device Manager it says the driver is not digitally signed. (It's the Microsoft supplied driver). I tried the update and find a driver who says that it is digitally signed, but when I try to update it will not install because it is not digitally signed.  Help!

  Hello

  1 what other readers USB not detected on the computer?
  2. don't you make changes to the computer before the show?

  Method 1: I suggest you try the steps from the following link:

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-HK/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Also I suggest you to update the chipset drivers.
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Why my drive WarChiefs age empires 3 will not download on my windows 8? 

  Original title: Age of Empires III

  Why my drive WarChiefs age empires 3 will not download on my windows 8?

  Hello Bromandbj,

  Thank you for the update on the question and sorry for a delayed response.

  If you found the error 1628: could not complete the installation then in this case I suggest to try the steps in the following thread by Rohit lydie responded on 24 June 2013 and see if it helps.

  Age of Empires 3 not installing - error code: 1628: failed to complete Installation

  Keep us updated on the issue.

  Kind regards.

• Graphics driver update will not install

  Hi guys, my first post here. I've upgraded to Windows 7 through HP. I downloaded the graphics driver latast Mobile Intel(r) 45 Express Chipset (8.15.10.1808A). It will not install on my machine. He informed me of an "unknown error" and pushes me to cancel the installation. Anyone else having this problem? It supposed to be compatible with my laptop TR. (YOU Presario CQ61-212). TA.

  Message edited by fallible on 06/11/2009 20:08

  Thank you Daniel for answering my message. While the NVIDIA GEFORCE driver is an option, my driver is INTEL (R). I have since solved the problem by installing the BIOS update. Then, I was able to successfully install the graphics driver updated. Thanks again.

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• computer will not install an external hard drive.

  my computer does not recognize my external hard drive enclosure. I went to fry and the internal hard drive and the speaker works. I brought my computer to a friend's House and he read it to his house. It turns out that I had to put the jumpers on CSEL. When I got home and tried to plug it in, it won't read it again. I tried to troubleshoot it and he said that my mass storage device has a problem with the drivers. the thing is, he worked at the House of my friend with my computer. I do not understand and it makes me crazy. the only difference is that the reader reads to my friend's House and won't be at the mine.

  Hi danny,

  Did you use the same cables in your home that have been used in your friends?

  The physical location being the only variable might mean that a wire or cable is loose.

  The reader must be reinstalled in the hard disc enclosure.

  I recommend that you check for loose connections.

  Your PC is connected to Internet at your friend's House?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 will not install on my hard drive SATA III, even if the installer and menu of the BIOS are localization.

  The controller is enabled for all SATA connectors and the drive is one of the SATA 3.0 Gbit/s ports, I've heard is a way to get through. However, it did not, either. Can anyone help?

  Here is what I am dealing with, set up a few hours ago:
  -Intel DH77KC card
  -Intel Core i7 - 2600K 3.4 Ghz processor
  -Disk hard Western Digital 1 TB black
  -Corsair Vengeance 16 GB of Ram
  -Corsair TX650 80Bronze
  -Windows 7 Home Premium 64-bit
  It starts, and then Windows 7 gets no more than it will not be installed on the hard disk. I can't make a new partition, either, nor can I format the drive in the window. The BIOS settings do not exactly help because I'm not using RAID and FDI does not do.
  Maybe there's something wrong.

  Try to remove 3 branches if theyre 4 GB each. See if it installs. If so, put the 3 branches after windows has been installed

  This BIOS is on it at the mo?

• Formatted external HARD Canvio - lost disk software pre-installed

  Hello guys, I bought a disc slim canvio external hard.

  I did a format on exfat to make this work on mac and pc, but I lost all the pre-installed features provided with the reader as 10 GB cloud storage, remote access software, password lock, backup software, backup and recovery.

  can someone help me please to recover back?
  Thank you.

  The HARD drive password tool can be downloaded from this page:
  http://www.toshibastorage.com/hddpassword/

  Software v1.1.2.77 of NTI Backup Now EZ can be downloaded here
  http://storage.Toshiba.com/drivers/W...V_1.1.2.77.zip