Error: "device driver will not install" when you connect Ipod touch to my computer
Original title: Ipod touch
HI, my Ipod touch is not recognized by my laptop. He says that it not install the 'device driver '. Any thoughts on how to address this... much appreciated.
Tags: Windows
Similar Questions
-
Get a Bluetooth device message"driver is not found when you connect Bluetooth
original title: Bluetooth connectivity problems
Hello
I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!Hi autumnv92,
Were there any changes made to the computer before the question?Check out the following and check:Method 1:Open the hardware and devices TroubleshooterMethod 2:Error: "device driver Bluetooth not found" when you try to connect to a bluetooth deviceMethod 3:See the following steps:
1. turn on your bluetooth device
2. right-click the icon for the device in the system status bar
3. choose / click on "show bluetooth devices.
4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
5. simply remove from the list.And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."Method 4:Bluetooth devices do not work correctly on a computer that is running Windows 7
Also check these links for more information:
Add a Bluetooth device to your computerhttp://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerConnect to Bluetooth and other wireless or network devices
http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devicesChange settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceHope this information helps. -
Device driver could not install when installing NPVR Aiptek camcorder
Original title: Aiptek camcorder NPVR
I need help to get information in order to install this device driver.
I have the application software disk and I tried to install
This on my laptop but I am informed by my system that the
device driver not install.
What, if anything, can I do?
Please notify.
Thank you
Jerry
Hi Jerry,
-He worked before?
Try these steps and check.
Method 1: Put the computer to boot, then check if you are able to install the drivers.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Method 2: Uninstall and reinstall the driver software and check.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Automatically get recommended drivers and updates for your hardware
Let us know the results.
-
device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(Hello
Direct link to the site Reltek with drivers below:
Driver Realtek RTL8192E for Windows7 hereAlways the best choice is to use the drivers from your motherboard, desktop or mobile site.
Second place should be device site producer.
Last chance is updated for Windows.If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).
If your issue is resolved, please indicate then your wire is with solution.
-
driver will not install keeps giving an error. Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer. installs fine on other computers in the House. for any help or suggestion would be appreciated.
Try to download and install the latest drivers for Kodak for the ESP 6150:
http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/trueInstallation instructions
- Check that your computer meets the system requirements.
NOTE: WINDOWS XP 64 - bit Operating System only is not supported. - Disconnect your all-in-one printer from your computer.
- Make sure you have connected to the computer using the administrator account.
- Close all programs.
- Download the software on your computer.
- Double-click the *.exe file, and then follow the on-screen instructions.
- Once the installation is completed, connect your all-in one to your computer.
- Select Start > programs > Kodak > Kodak AiO Home Center.
Troubleshooting of the printer:
1. open the printer Troubleshooter by clicking the Start button
2. then click on Control Panel
3. in the find what box, type troubleshooting
4. then click on troubleshooting
5. under hardware and sound, click "use a printer.
Setting up a printer:
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
- Check that your computer meets the system requirements.
-
USB 3.0 AMD host controller driver will not install.
The USB 3.0 AMD host controller driver will not install. He would then set I uninstalled assuming that Windows would be updated and reinstall. Now it will not reinstall.
Any ideas?
Hi Felix,.
Thanks for the reply.Have you tried the methods suggested earlier?Refer to issues related to the printer:Solve printer problemsDownload and install the latest drivers for your printer from the manufacturer's website.I hope this helps. -
I tried several times to get a solution to this problem. There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect. My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked. Sometimes my mouse freezes every few seconds until it is maddening.
original title: hopelessIt seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:
You mentioned a background current program, if it helps:
Perform a clean boot to determine if background programs interfere with your game or program
http://support.Microsoft.com/kb/331796How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.
I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.
If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.
Computer manufacturers
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have the graphics card Intel integrated, you can check on the website below:
Update utility graphics card Driver Intel
http://www.Intel.com/p/en_US/support/detect/graphicsIf you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:
NVIDIA driver downloads
http://www.nvidia.com/download/index.aspx?lang=en-usAMD (ATI) drivers & Software graphics card
http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspxIf you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.
An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:
How will I know if my computer has a memory problem?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problemHow to use the Windows Vista memory diagnostic tool
http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.
Memtest86
http://www.Memtest86.com/I hope that something of the above can help lead you to a solution.
Kind regards
-
I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
and it won't go away. If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software. The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?Hello allysoni,
Thank you for using the Microsoft Windows Vista Forums.
I just want to check, your Bluetooth device work? Or it works and you are just be notified? What brand is your Bluetooth device and what type of computer you are on?
Have you went into Device Manager to verify that the drivers are all up to date? Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers? If so, right click and select "Update". If the driver is already updated, and then select uninstall. (You may be prompted to restart)
If you are not prompted to restart, click again on the device and select 'Install' please let us know status. Thank you!
Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
C drive is not visible when you try to defragment
Original title: errors of Volume disk, drive C is not visible when you try to defragment drive C in the maintenance of the system
I tried to do a regular defrag of my C drive and received a message that there is Volume disk errors. The utility asked to reboot the system and clean the C drive. But when I access the defragment utility, drive C is not present there to use the application... suggestions?
Hi Dante62,
I suggest trying these steps provided below and check if the problem is resolved.
Step 1:
a. right click on the c drive.
b. Select Properties.
(c) under the Tools tab.
d. Select Defragment now under defragmentation.Step 2:
Try the SFC scan on the computer.
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Check the link for more information on CFS below mentioned scan.
http://support.Microsoft.com/kb/929833
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Software device driver was not installed
I can't connect my digital camera to my computer. He tells me that the software device driver has not been installed successfully. I called my manufacturer and they told me it was my computer and Vista software. I can connect my camera on other computers that have XP. Can someone help me?
Thank you!
Hi tarheelfanatic,
Please see the link below to the Canon site. Don't forget to download and install any necessary software/firmware and try to connect to your camera again:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
external device is not detected when you connect to a personal computer.
Windows 7 pro, pen drive sound edition does not detect when you are connected.
Yes sir its resolved, so that the new windows 7 pro, its pre disconnected installation mode. so that I can re active in what optins usb boot menu settings.
Thanks to you all.
-
USB device not recognized when I connect my iphone to my computer
Original title: USB device not recognized
I get the error message "Unrecognized USB device" when I connect my iphone to my computer. It is the same as the one I use for months. Same computer. Same sync cable. I have changed everything, including hang iphone to my wife instead of mine and get the same message. I also did a restore on my computer that doesn't change anything.
Hello
At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.
Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.
Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.
-
Pop - up screen to record images does not appear when you connect the camera
Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
Guest USB? Download the pictures?Hello
- Are you referring to the AutoPlay window that appears when you connect a device to the computer?
What is the number and the model of the camera?
In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.
Troubleshoot AutoPlay
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems
-
Original title: using Nero Software on Vista service pack 2.0 and get error Microsoft MSXML 4.0 or not installed. In my view, the folder is empty, I programs and I can simply download to Microsoft?
Using Nero Software on Vista service pack 2.0 and get the error Microsoft MSXML 4.0 or higher is not installed. I find that the MSXMLfolder is empty. NERO software worked very well and I have no recollection of doing an update of MS or NERO, so don't know why it doesn't all of a sudden. Do I create programs and can simply download the modules of MSXML from Microsoft?
Hello
Download and install the package manually and check.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=15697
Hope this information helps.
-
CD/DVD Rom drive - disk not detected when you try to play a movie or a cd.
I tried everything in the book according to what the technical support guy me to HP. Gave me a new optical drive. I made the purchase and asked the guy. How do I get the driver if it does not appear in my device manager? He said just to install the new optical drive, and it will download automatically. Yes, it was the most ridiculous thing. He did his best to convince me. Now, I received the new optical drive and even absurdity. It won't work. Try to get assistance and spend hours on the phone with them and no one can help me. Wow. Scam, scam, I don't really know what to call it.
Hello
Maybe it wasn't the drive first:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Satellite C660-1GK - C HDD partition problem
Hi all! I have the Toshiba Satellite C660-1GK for a year and a half. After 6 months, my hard drive is dead. First the laptop has been really slow, then started the famous clatter of the disc.I made backup and checked the disk with tools from Hirens.
-
Why text inserts back on Keynote slide?
With Keynote 6.6.1 with El Capitan 10.11.2. Suddenly the text that I entered a slide is BACK. IE SDRAWKCAB. I think I must have inadvertently clicked... but can't understand why it's happening. The text is back if NEW or CHANGED to another copied
-
License expired for vb examples? Say it isn't so...
We bought standard measurement Studio for Visual Studio 2010 2012. When I try to run GlobalContinuousAI_USB.2010.sln (an example in the MS .NET folder) I get the following exception {"Error during creation of the form. For more information, see Exce
-
I'm trying to defrag and I get a message saying ' Disk Defragmenter has detected /f. Chkdsk is supposed to run on this volume, please run Chkdsk.» How am I suppose to do?
-
I play ringtome in my application but his work even the phone is in silent mode so how dectet peripheral mode if she silent or normal vibration mode any help THX in advance