Mcupdate.exe does not work after doing the Startup Repair

Similar Questions

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• Y700 - Dolby Audio does not work after resetting the system

  After resetting my computer to factory settings, audio dolby does not work. This is the error message I get:

  "Your installation is missing components. Reinstall the audio driver or the stand-alone components available on the support site for the manufacturer of your PC. »

  His works on my computer, just not this request.

  Thanks for the help.

  Matt

  I have the same problem, I have a 70-Z40 and the Dolby Digital Plus open, but does not work, you can choose the profile but is not even, I have this problem after the last windows 10 updated a few days ago.

  I hope you can help, thanks in advance

  EDIT: I solved it after a few tries, I don't know if it is the best way, but it's how I solve this problem:

  (1) Delete last windows update (after that, it did not)

  (2) delete the sound driver from Device Manager and reboot (it did not)

  (3) download the driver for my lenovo model page and install it (it did not)

  (4) any uninstall Conexant audio and Dolby of my computer and re - install again (it does not), it seems that my dolby 7.6.4.9 driver version is not correct, I need the 7.5.1.1

  (5) again to uninstall everything and restart

  -From there, he solved my problem

  (6) go on my computer (my system is in Spanish, so I don't know the correct name for the version in English, sorry) and then go to the Lenovo partition, then open drivers > Audio > Setup.exe This will install your Conexant audio driver, and then restart.

  (7) after you restart your laptor, do the same thing... Lenovo > drivers > Audio > DolbyGUI > x 64 > DolbyDigitalPlusHT.msi, and then restart your computer and it should work fine.

  Sorry for my English.

  See you soon

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• My HP G62 a22se does not work after update the latest version of the Bios

  Please can someone help me?

  After upgrading the bios version, my notebook

  Does not yet give me only black screen

  I tried the button window + B with power to restore the old version it doesn't work too.

  can all of my work in this tower you all help me to solve it with my car

  Sorry for my English little

  Thanks in advance

  Thanks to allah

  I solved the problem of my self

  using the

  WinFlash for HP Notebook System BIOS (for notebooks with Intel processors)

  

  and I have LCD I put plug VGA screen taken from my knees

  the LCD has worked as a laptop screen and I solved the problem

  and the laptop screen works again

  Thank you

• Smartphones blackBerry lock key / sleep button does not work after upgrade the OS to version 5.0 Bundle 1168

  a refresh, I noted that the "key lock" button and the button 'sleep' on the top of the phone no longer works. The phone unfortunately does not go on standby when you press the mute. The mute however put mute a telephone conversation.

  Mari_43 wrote:

  is there anyway that I can get back to a version that supports?

  Yes, you can downgrade to an older version if you want.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs. (If you never physically installed the OS on your PC, go to step 2.)

  2. next, download and install the earlier version of the operating system. Operating system blackBerry downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.
  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• 350 laptop G1: Touchpad does not work after open the cover.

  Whenever I close the lid, when I open again the touchpad does not work.

  I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

  I solved my problem!

  I have unistaled the driver PS/2 Synapatics 19.0.12.95

  Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.