MD3600f Firmware Upgrade and what good MDSM software

Similar Questions

• SGE2010 - Firmware upgrade and config does not save

  Hi all

  I have a few questions, but ill start with what im trying to achieve.

  With the help of the EMS 2010 for Microsoft NAP with 802.1 x auth for access to the switch, which has led to some questions

  What I have: an EMS 2010 48 port switch firmware 3.0.0.17

  Firmware update: to ensure im not having not problems due to the old firmware, I tried to upgrade using ros_ls1_bp_ge_bx - 3020.ros to 3.0.2, by downloading the file through TFTP, the transfer is complete and that's all, nothing happens.

  Restarting the device: as part of the upgrade process, I thought I might restart, so I rebooted and found that all my settings were cleaned, as if a reset occurred... and add further pain, the backup of the settings I had taken do not appear to introduce themselves with a new request.

  NAP support: so I tested my server NPS (RADIUS) with NTRadping.exe and everything is good, however I can't the SGE2010 to talk to it... the authenticator State in the web interface is still listed as initializing... I'm not sure if it is a simple mismatch (where the attempt of a firmware upgrade), a tag that should be on the side of RADIUS or switch misconfig.

  So, in summary:

  (1) how the hell you upgrade the firmware?

  (2) why are none of my saved settings to restart the device?

  (3) if anyone one of them puts up with PAN and has all wisdom of bone beads, let me know.

  Hi Ben, once you update the firmware, you need to go to the active image, apply the second image. Restart the unit. Regarding the configuration of switch, you must save the configuration running at startup configuration

  Admin-> file management-> copy files (running at startup)

  -Tom
  Please evaluate the useful messages

• What is a good antivirus software for mac and do I need?

  What is a good antivirus software for mac and would need one. I'm under el capitan, later.

  There is no such thing. They all cause more problems than they were designed to solve.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

  upgrade windows xp to windows 7

  IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

  First the cost, you must know if your hardware can support Windows 7

  In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

  If your less and can not be updated it may be best to start thinking about a new computer.

  If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

  Good luck

• Jump and mix tracks after firmware upgrade?

  I can't explain it. Since the latest firmware upgrade Fuze my wife started jumping titles (for example jump to the next song to halfway through the current), but a funniest part - he mixes parts of files. We can listen to a song, and then all of a sudden he would be interrupted by 1 second of a file from a different album and then come back to play the first song from the point it was interrupted. What gives?

  Me that was too much.  I downloaded all my music back and reset my Fuze and reformatted it.

  Charge of excessive songs and back on went.

• What is a good defragmentation software for windows 8?

  Hi, I would like to know what good is a defrag software to use for windows 8?  I know that it is important to defragment your computer often and would like to know that I can download for this for windows 8.  Thank you.

  It is not necessary to defragment windows 8. Former boards of defrag does not apply to windows 8. Win 8 deals with the defragmentation. Do not use all of these utilities.

• I have Dreamweaver CS6.  Is it possible to upgrade to Dreamweaver CC?  If so, does it fee involved? And what is the process?

  I have Dreamweaver CS6.  Is it possible to upgrade to Dreamweaver CC?  If so, does it fee involved? And what is the process?

  Unfortunately, the CS6 is the latest version of that adobe made available for purchase on perpetual license.  So there is no available upgrade, except to join the creative cloud and pay every month.

  As a user of Creative Suite, you qualify for a substantial discount for the first year-$ 29, $95 / month for a comprehensive Plan that allows access to all software and other services.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Nancy O.

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

  Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

  Hello

  Please use the part number and procedure on page 38 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

  (Note: same procedure for s1xx machines).

  Kind regards.

• Malicious Software Removal Tool (MRT) __How long does take to analyze and what to do after?

  Today, I found a file that says it has to be scanned with the MRT.

  I started it and it worked for 5 hours now and still only about 20% is done.

  How long a scan normally take?

  And when it's done, what do I do?
  First time I've heard of MRT, so I really have no idea.

  I'm sorry, but there is a lot of info provided it for you to read.

  We have no idea of what is on your computer, how do you have downloaded/installed program, etc, etc.

  Reinstall it.

  Also, use this program against malware:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  For any other questions of safety, repost in the correct Vista Security Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• BEFW11S4 v.4 and Vista - firmware upgrade failure

  Hello

  I've had this router for about 5 years, it runs with XP without any problem. Since I got a new laptop with Vista, the wireless connects for an hour or two, and then falls back and I have to unplug the router for five seconds, then reconnect to reconnect (my other laptop with XP has not this problem).

  I understand that there is compatibility between the BEFW11S4 v. 4 and Vista problems so I tried to update the firmware of dartybox.com and kept getting a message that failed. I hard rebooted the router but button of restart 30 seconds and the upgrade has always failed. I so re-set to factory settings through the online admin to the router, re-uploaded the implementation level and still got the emssage failed (I am sure that the model number & version is correct and I download the appropriate firmware upgrade).

  Is there anything else I can do another one) buy a new router; (b) living with school drop-outs; (c) remove Vista and go back to XP?

  Thank you

  Bigdank

  Genius! I have changed the name of code.bin, went to the admin > tab upgrade firmware and the upgrade file. I had a wireless without interruption ever since, even after the awakening of the laptop to sleep.

  Thanks for your help

• With MBAM, other tools, how does FileAssassin help?, Bug Reporting any help?, and IE end when done removing what good?

  Back studied MBAM/adjustment functions and I was wondering about these other tool they call them and what purpose that they maintain with caregiver.

  Hello

  To be sure, you get all the verification of the correct answers, the forums of Malwarebytes.

  Malwarebytes - Forums
  http://forums.Malwarebytes.org/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• What is the difference between upgrade and custom installation options?

  * Original title: windows 7

  What is the difference between upgrade and custom installation options?

  Hello

  How to do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Sometimes the only way to upgrade is to do a clean install,

  " Upgrade Windows XP to Windows 7 "

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7#T1=tab01

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  "Upgrading from Windows Vista to Windows 7"

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7#T1=tab01

  You then have the repair facility, which is an In = Place Upgrade.

  "How to do a repair installation to repair Windows 7"

  http://www.SevenForums.com/tutorials/3413-repair-install.html

  See you soon.