BEFW11S4 v.4 and Vista - firmware upgrade failure

Similar Questions

• 200 d IOmega IX4 Firmware upgrade failure

  Hello

  I have an IX4 - 200 d which I inherited. Initially, it wouldn't boot and display only the symbols of USB stick/network after about 60 seconds.

  With some searching on Google, I created a boot disk USB with the firmware updated on this issue. All goes well until the Firmware upgrade begins. I go to the step of (what I assume is) the upgrade of the firmware and it gets 75%, hold for 5 seconds and then the machine stops.

  I tried to repeat the update of the firmware with all the drives present, with every other drive in the first slot and with all the disconnected drives. But it seems to behave in the same way.

  Is this a known issue? Or could it be a hardware failure?

  I'm pretty eager to find a solution - it takes a long time for me to accept defeat.

  The only other suggestion that suggested Dr. Google is to start linux and reformat the hard drive?

  Any help is appreciated.

  Kind regards

  Pete

  Hi André,.

  This case can be closed.

  After the above mentioned procedure eventually work, I didn't know that - ALL readers should be present and formatted during an attempt of USB firmware update / install.

  The link again on the forum - http://forum.nas-central.org/viewtopic.php?f=14&t=4401

  This seems to be the only solution.

  Kind regards

  Pete

• LaserJet M4345 MFP firmware upgrade failure using the HP Download Manager

  Hi all

  I have a LaserJet M4345 multifunction printer, and I tried to see if there is any updated firmware for the printer.
  When I try to access the web configuration interface, I see that the printer is running a firmware with 20070213 code 09.071.8

  I downloaded the software from the HP Download Manager to try to update the printer automatically with a simple procedure.

  The program finds the printer and said that she needed upgrade. He showed that the printer is model J7949E and current firmware V.33.14 while the update of the Firmware version has been V.33.21

  I leave the program to start the process of update, but as soon as I said to start the update immediately (do not), a new window will appear showing the status of update and it closed after less than a second, replaced by another saying that the firmware update was complete.

  Although I was skeptical about the process in so little time, I tried to check again the printer web configuration interface, but it showed that the firmware was always the same, I saw earlier (20070213 09.071.8). To try to detect the printer from the Manager software download HP found that the printer was still need upgrading (and asked me if I wanted to do now). Try once led to the same results.

  I tried to restart the printer, the program and the computer with no result.

  I'm running Windows 7 32 bit and the printer is connected to the router which I connect this pc wireless.

  If I can provide any other information, please let me know.

  Thanks in advance for any help you can provide.

  Piero

  Hey Unreal, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• EA4500 firmware upgrade failure and subsequent problems

  I had a few problems of intermittent connection with my ea4500 so I decided to upgrade the firmware for the Smart Wifi. I lost my connection to about 90% and could not get the router to connect with my ISP since then.  I am able to bypass it and go straight from the modem to the desktop, but I now have several errors trying to use the router. I tried to hook it up several times but no luck so far.  The errors are:

  Your computer failed to renew its address from the network (from the DHCP server) for the network card with network address 001BFC522BCC.  The following error occurred:

  The operation was cancelled by the user. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  And

  Intel PRO/100 VE Network Connection adapter: Adapter link down

  The problem has created an xbox for emergency home for my 7 year old grandson. Minecraft appealed to him.

  Good thing it's working already. Moreover, with the Linksys Wifi Smart, Cisco Connect firmware update would be uninstalled and you can not use more with the new firmware. You can make changes by access to the content of your Wifi Smart of Linksys account.

  Access your account Smart of Wi - Fi Linksys via a web browser

  Linksys Smart Wi - Fi, frequently asked Questions

  Alternatively, you can install the app from Smart Wifi on your IOS or android devices. Alternatively, you can make changes using the application said.

  Linksys Smart WiFi App frequently asked Questions

• Number of COA and Vista express upgrade - MODUSLINK

  I finally managed to get hold of someone at Moduslink on my request to upgrade to vista now show invalid. It seems that I gave the wrong number of COA from the recovery disk came with the laptop. NO, this isn't what they want - they want one on the sticker of microsoft on the bottom of the laptop that starts with a triple 000.

  If you gave a wrong number then you will have to contact them on 00800 666 44 666 and they erase the application and you can re apply after 24 hours and, hopefully, everything should work. Be prepared to wait a while on the phone that they are very busy. According to them, if all goes well, then the product should be sent in time 4-6 weeks.

  Hi Gordon

  Thanks for sharing this info with us. I remember that someone has asked for the number of COA.
  The number of COA starts with 000 :)
  It might be useful for others who want to upgrade Vista

• What 3115cn error code 117-363 average after a firmware upgrade failure?

  Hello

  I just got a replacement 3115cn after the former we failed in the warranty. I noticed that the firmware was old so just tried to update using the USB port and the printer is now saying to call assistance with error code 117-363. No power glitches or a bad power / data cables etc. He copied through the fine then just failed to complete startup after reboot.

  The only relevant fact that I can think is that the MPC had the latest firmware above as it has been transplanted across from the old, but the base firmware was older than the protocols supported in the CPC. That's why I tried to upgrade in the first place, I had lost a bunch of new features only have the old version of the installed base.

  I'll be the appellant first thing, but I wanted to ask if anyone knew in advance. (It would be a great help if each error code was listed on the web site of Dell, so I could get myself.)

  Kind regards

  Paul

  Message edited by paul_a_hill on 02/25/2008 17:39
  
  

• RN-102 firmware upgrade failure

  10200 NAS chassis if it starts plu (upgrade fails), can records be deleted and installed in another frame or read in a different way?

  Thank you for your help. We have resorted to Netgear Tech paid phone support which has been very helpful. It turns out that upgrading going on the first time, but the SIN hung up somehow. Everything is good now!

• PS6000: Firmware upgrade failure of V5.0.8 to V6.0.7

  I have two old PS6000 storage and PS4000. a 2nd successful update to V6.0.7 V5.2.11. But the PS6000 is not updated once V5.0.8 to V6.0.7 and showing error 'you are unable to upgrade to this version due to compatibility problems, abandoned update". The two storage are not in production prior to upgradation so I did if factory them failed!

  I have also tried upgrade to 7.0.1 but couldn't so then tried V6.0.7 and improved PS4000 but not the other.

  I need to keep the two in the same group and version storage. Could you please help me in this regard.

  

  Thanks in advance.

  Johnny

  If you read the documentation update carefully, you will find the info of what version you can upgrade to the last or an intermediate version is necessary. Upgrade your 5.0.8 to 5.2.x first and than 6.0.7.

  Kind regards

  Joerg

• upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day

  upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day:

  problem started when I upgraded to WIN 8.  I get the dmp file but I don't know what to look for.

  I tried an error: see attachment

  I use a DELL optiplex.

  John

  Hi John,.

  Thank you for your response.

  This issue may occur if a computer hardware component is damaged, malfunctioning, or if an incompatible driver is installed on the computer.

  I suggest you follow the methods and check them off below if it helps:

  Method 1: I would say that you want to run cleanup start and check if it helps.

  https://support.Microsoft.com/en-us/KB/929135?WA=wsignin1.0

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Method 2: I suggest you install the latest video drivers on the manufacturer's Web site as below.

  http://www.Dell.com/support/home/us/en/19/products/?app=drivers

  F or make reference to follow the article below you.

  http://Windows.Microsoft.com/en-us/Windows/install-upgrade-activate-help#install-upgrade-activate-help=Windows-8&V1H=winrttab1&V2H=win8tab1&V3H=win7tab1&v4h=winvistatab1

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• HP a367c XP family, upgrade to clean install of Vista. Firmware upgrade must be done again

  I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption

  1. can I need to reinstall the firmware for a367c office updates, or others like bios, other ect.

  2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours.

  Thank you

  plantingrichard

  plantingrichard wrote: I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption 1. I need to reinstall updates firmware for a367c office, or others such as bios, other ect. 2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours. Thank you plantingrichard

  Hello plantingrichard, first of all, it would be useless to worry about Firmware updates, because data for these Firmware updates are stored in the devices that the firmware has been installed for.

  You may be able to restore the system with the feature of restoration of HP Recovery from the hard drive to the system startup and the F - 11 key when the HP Logo screen. Just as it was when shipped, it would put all HP applications on the system.

  You can then use the Vista DVD disk and perform an inplace of Windows Vista SP1 upgrade.

  If you don't want all HP applications, you can perform a new installation of Vista.

  You may be able to locate the Vista SP2, but I suggest the Windows Update site and download and install all updates including Vista SP2.

  If you have a DVD of Vista SP2, you can use it to upgrade or new installation. The Vista SP2 would have included in the DVD of Vista SP2 SP1 updates.

  As you suggest, it will take some time to complete, but you'd probably have a more stable system using this approach.

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• Need advice on the recovery CD and Vista upgrade on Satellite M100-222

  I want to share my problem to get some tips. I got a laptop Satellite M100-222 Windows XP and Vista capable, then I got an upgrade to Vista and it works with few problems that do not recognize some programs.

  That's why I have some needs and need your help and support and they are as follows:
  1 - is possible to reformat using the upgrade of Vista, or need to reformat with XP first and then update with Vista.
  2 - I tried several times to start the CD, DVD (product recovery) to reformat the laptop. However it is said (operating system not found).

  Kindly enlighten me.
  Concerning

  With regard to the point;

  (* 1) * If you ONLY upgrade Vista CD, then it s necessary to start the first restore XP CD, and then upgrade to Vista.

  (* 2) * usually start from the CD/DVD recovery must format the HARD drive and need to install the new image of Toshiba. Please check if you have started since the right recovery CD! Don't mix it with the Express Media Player recovery CD!

• Jump and mix tracks after firmware upgrade?

  I can't explain it. Since the latest firmware upgrade Fuze my wife started jumping titles (for example jump to the next song to halfway through the current), but a funniest part - he mixes parts of files. We can listen to a song, and then all of a sudden he would be interrupted by 1 second of a file from a different album and then come back to play the first song from the point it was interrupted. What gives?

  Me that was too much.  I downloaded all my music back and reset my Fuze and reformatted it.

  Charge of excessive songs and back on went.

• I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  original title: to upgrade

  Hello

  Read this information before you buy Windows 7:

  "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  And here is the site of Dell to see if Dell has Windows 7 drivers available for your model

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  See you soon.

• I have Windows Vista Home on my laptop and need to upgrade to Windows 7 Professional. How do you do that?

  I have Windows Vista Home on my laptop and need to upgrade to Pro 7. How do you do that? Im not grumpy, so do the kind of dumb-means answer.
  So can I do it? How can I do? Thank you!

  original title: upgrade to Pro 7 since Vista Home?

  You are referring to the Express upgrade. Anytime, upgrade is used to upgrade editions of Windows 7 to a higher edition of price. You cannot use the Express Upgrade updates from Vista to Windows 7.