MDR-nc31e headphones

Similar Questions

• MDR-NC31E noise of works do not?

  Hello

  I recently bought a pair of MDR-NC31E headphones for use with my Xperia Z3 (D6603).  The phone recognizes the headset as the noise canceller correct model when I plug them in, but I don't notice any noise past.  With the headset connected, I can easily hear the keyboard by clicking on the sounds of my colleague in the next cell (not particularly strong, but I hear it as if I had to wear standard earphones).  I tried different settings (office/Bus/plane), but do not notice any difference.  I never had noise listening headphones before, perhaps if only I wait too long.  Is there a way to determine if these headphones work correctly?

  Thank you!

  I can't say for sure, but I think that you notice the advantage more in noisy places - my wife uses this type of headphone and she says she notices the difference in noisy environments

• is North Carolina in MDR-EX750NA limited as MDR-NC31E (noice fixed only 3 levels) or totally speculative?

  I see that Sony have now published a new pair of noice cancelling in-ear, called MDR-EX750NA headphones.

  Are they better than the 'old' called MDR-NC31E I find very limited?

  When I use these old with my compact Z3 (does not work with any phone odler my other compact Z1) she has just 3 fixed levels of noice cancelling: flight, train/car and office. And I have to choose which of the 3 manually.

  They work OK if the surrounding noise is exactly like one of the pre-sets, but very rarely the noice fits perfect to the anti-noice.

  If I compare with my ear too much noice-cancelling Sennheizer they really actively listen and send anti-sound based on what they actaully heard in their microphone mounted on a large enough box on the cable (no fixed level - they completely adapt to surrounding noice). That's what I want a pair of in-ear.

  Then the new MDR of Sony-EX750NA - they listen and adapt to the surrounding noice or they have just fixed levels?

  And also, there are requirements on phones that are compatible with MDR-EX750NE?

  / Patrik, hoping for better (fully adaptive) noice cancelling in-ear, preferably corresponding to my phones (compact Z1 and Z3 compact)

  This is step 1 better. This feature is called "Auto AI Noise cancelling" Sony.

• Sony MDR-NC750 headphones compatible with Xperia Z2?

  Hello. I would like to know if this new headset works perfectly, it's will support NC and audio Hi-res. It lists as only Xperia Z5 compatible but as I see it uses 5 pins and Z2 has digital NC compatibility as well as the compatibility high-resolution audio so I do not understand why they would not work?

  MDR-NC750 will work with Xperia Z2 without problem.

  You will have better sound quality than with old headphones NC and NC function will work. BUT you can enjoy HR audio headphone Z2 port can't stand out HR. It is limited to 16/44.1

• MDR-NC31EM headphones is not compatible with the samsung device?

  Recently bought this headset. Tested out in the shop with my phone (htc desire 6/10) and it worked fine. Then am home and plugged on my Tablet and it barely works at all. The sound is distant and tinny, and some audio is not audible at all. Also the device seems not be able to correctly detect the headset. It keeps indicating that they were removed when they are always connected and the sound stops completely. At first I thought that there was a problem with my camera, but then I tried my helmet of roommates and they work OK. So what I want to know, the headphones are simply not compatible with this camera or is it possible to fix it. Honestly, it seems that more than a hardware problem, I don't know if it will be an easy fix. I already rebooted my device a couple of times and no change. My tablet is samsung galaxy s tab SM-T700. OS 5.0.2. Headphone Jack: 3.5 mm any ideas appreciated!

  According to the helmet product page, it won't work with devices connector 5-pin 3.5 mm. You must ensure that your Galaxy tab has this nake material.

• MDR-NC31EM headphones

  Good evening.
  The headset is compatible with Sony Xperia

  No, it is not compatible, only with the Z3, Z3 more and the Z5.

• Detect generic headphones

  Hello

  When I plug the headphones Sony, my Z3 detects the model and automatically sets in the audio settings. Large.

  The problem is that if I plug other Sony headphones then the setting does not change the credits automatically.

  I so need to go and turn it manually every time (because I use a set of Sony and another a 3 rd part).

  It would be really great if this info would reach the devs, because it sounds like a trivial thing to fix... If you don't detect helmet, simply the setting on "generic".

  I got more information on this subject and I am afraid that the phone will not be able to automatically detect the different helmets. He'll do that with no helmets. The only time where it can detect automatically is when a headset 5-pole is connected. Then, it will be set automatically MDR-NC31E/NC31EM.

• How is it I can not connect my sony to my iphone headphones 5 more after I said to Fox network

  I can't connect it back and I lost track of this guy with the MDR-1Rbt headphones so now I can't use it. I want to connect it or sort by a new cord

  Hi Ephraim! How were you connect the iPhone 5 in the front headphones? You just update the iPhone to its latest version of the software?

• ZBook 15 G2: Earpiece/headset Bluetooth does not connect

  I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

  Can I pair the headset, and it appears in the printers and devices window.

  However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

  If I look in the services:

  Bluetooth support Service: not started, automatic

  Bluetooth OBEX service: not started, automatic

  : Supported Bluetooth started, manual repair

  If I try to start Bluetooth Media Service, I get an error 1053.

  I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
  June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

  Any suggestions where to look next would be appreciated.

  stringy76,

  I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

  https://communities.Intel.com/thread/104851

  If you follow these steps, you should be able to reinstall these updates and your headphones working again.

• Z5 Xperia accessories

  Hello!

  Is there anyone here who knows if the stereo microphone Sony STM10 will work on Xperia Z5?

  I think that it will work on any Android device with a conductor (?) 5-port to THE, so I wonder if the Z5 door.

  I am grateful for answers, thank you.

  Hello

  Since Z5 is not yet launched, I can't say for sure, but I think it will work fine. New MDR-NC750 headphones, they plug 5 poles that will be compatible with the Z5 series and also other devices with Jack audio 3.5 mm 5 poles.

• Problem loading Z2 and sound problem

  Hello

  I was facing this problem recently where I'm wrong took the magnetic cable sony and plugged incorrectly on my Z2 xperiz.

  This was after the 5.1.1 update.

  All of a sudden, my phone did not start using my power of sony Bank and a charging cable quick, that I got afterwards upward and running.

  But the battery drains now how anyone, regardless of the use less.

  A battery that is used for the last days 1.5 with me now barely lasts 9hours without doing anything.

  The battery keeps fluctuating when it reaches 90%.

  A change in two outlet stores, z2 specific cables have not helped

  Three repairs, a new image, two complete resets didn't help at all

  Second question

  The sound is all of a sudden considerably low,

  I have the sony mdr-nc31e, which seems to be much lower than what it was in.

  Once again the repairs did not work, the Equalization does not seem to work any longer.

  and the sound does not seem to come from a speaker from a two, this is the model D6502.

  What is your opinion on that?

  Although the Sony forums have failed.

  I ran a check with the voltmeter.

  What has been found, it's my battery did not receive enough power and this kept fluctuating.

  Given a sony Center who said that I need to replace a battery.

• Helmet wrong or what? Why?

  Hello. On your page (http://www.sonymobile.com/gb/products/phones/xperia-z3/) you´re written the Z3 have characteristic with the MDR-NC31EM headphones noise digital. But in my Z3 box with phone, I have headphones MH750. Why?

  It is not the hurt helmet. What you get in the box with the device is the tied market.

• AptX - Auto activated?

  Hi, it of maybe a stupid question, but is AptX auto on when you connect headphones via bluetooth? I just bought a pair of Sony MDR-10RBT headphones that are active and is AptX so my Xperia Z2 and so I wanted to know if you must enable AptX somewhere on the phone or is it self-activated when paired with a compatible device AptX? I just wanted to check that my helmet using AptX and standard bluetooth A2DP.

  Thanks for any clarification.

  AptX is activated automatically when you connect a headset that supports.

• Control of smartphone for MDR headphone cable

  I wonder if it is possible to buy an extra cable / smartphone replacement order headphones MDR - 10R (inline microphone/distance). I looked into parts and accessory store and couldn't find any matches.

  Hello

  Try contacting our parts to 800-488-7669 Department, I have listed the references below for your reference.

  Cable with remote (BLACK) 1-846-820-11

  Cable with remote control (WHITE) 1-846-820-21

• Headphones MDR - Nc6 listen to noise

  Hey everybody,

  I would like to send this message directly to Sony. I bought these headphones of your not so long ago, and not sooner than later, one side does not work. Now I don't blare the volume, so I usually wait headphones/headset to last me a decent amount of time.

  I opened the side that wasn't working, and I found a very avoidable error. The two wires that connected to the real speaker have been merged when I took a peek. I had to apply a decent amount of force to get them out, leading me to believe that they were firmly melted on the other. I guess that this caused a short circuit and that's why she damaged the Platinum that I don't know how to fix.

  * Side note, these two sons had MANY showing bare, which leads to a few options for reduction of the volume limit, or find a more durable coating material.*

  I'm upset that this defective design. I feel like an EA, not enough emphasis is placed on quality. Yes to build the circuit and make it compatible with the appearance of noise can be a decent challenge (maybe not so much with PSPICE), but the quality of the product could be improved.

  These headphones have been enormous, until this incident. I really hope that your company focuses on fixing small errors like these and greatly improve the quality of the product. I am generally satisfied with products Sony and their quality, with the exception of this defective product.
  Sincerely,
  Disappointed customer

  I couldn't agree with you more. I'm not at SONY, I'm just another disappointed customer.

  But at a certain point, one, sooner or later, as a consumer, we must begin to discover where these products are from and under what circumstances they are done and why are relatively expensive. I have no doubt that Sony engineers are very intelligent, but even if the design of the headphones is impeccable, its production could not.

  Please take a look at the label and what countries are doing in the headphones. Made in China? Made in Malasia? Made in Indonesia? Made in the Mexico?

  Facts to start learning and important words are:
  -Maquiladoras (http://geography.about.com/od/urbanecon... adoras.htm)
  -Sweatshops(http://www.youtube.com/watch?v=xVuScVCF1Ws)
  -Duty free area (landscape http://infranetlab.org/blog/2010/05/bor... /)
  -Globalization (http://home.clara.net/heureka/gaia/global02.htm)
  -Corporation (http://www.youtube.com/watch?v=Pin8fbdGV9Y)

  And the always recommended "Story of Stuff" to round up:
  http://www.YouTube.com/watch?v=9GorqroigqM

  So poor manufacturing is a more complex phenomenon.