is North Carolina in MDR-EX750NA limited as MDR-NC31E (noice fixed only 3 levels) or totally speculative?

Similar Questions

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• MDR-nc31e headphones

  I was wondering if there was everything possible that I could buy just the mdr-nc31e headphones. I lost two of them while I was out. I don't want to buy headphones even once they are in perfect working condition and I don't have a spare £20 on part. Thanks if you are able to get back to me.

  You can check with your local support of Xperia.
  http://support.sonymobile.com/global-en/contactus/

  Or check amazon or ebay.

• MDR-NC31E noise of works do not?

  Hello

  I recently bought a pair of MDR-NC31E headphones for use with my Xperia Z3 (D6603).  The phone recognizes the headset as the noise canceller correct model when I plug them in, but I don't notice any noise past.  With the headset connected, I can easily hear the keyboard by clicking on the sounds of my colleague in the next cell (not particularly strong, but I hear it as if I had to wear standard earphones).  I tried different settings (office/Bus/plane), but do not notice any difference.  I never had noise listening headphones before, perhaps if only I wait too long.  Is there a way to determine if these headphones work correctly?

  Thank you!

  I can't say for sure, but I think that you notice the advantage more in noisy places - my wife uses this type of headphone and she says she notices the difference in noisy environments

• HP applications in the windows store limited to users of HP computers only

  The following response to my question on the microsoft 8.1 forum is provided below:

  "HP provide some Apps through the store, which, in itself, is accessible to all users of Windows 8. However they are limited to only those that run a computer HP so must by definition cross some authentication process to confirm that the attached computer has eligibility.

  "Never this process what once you have applied the Pack Pro, the operating system is no longer identified as being provided by HP so can not install HP specific applications.

  My question is this:

  "Once I applied the Pro Pack to my laptop HP Envy Touchsmart 15 quad, what applications/upgrades I no longer able to download because the operating system will be is no longer recognized as being supplied by HP?

  What is the workaround for this.

  Hello THERE-5707

  HP Pro Pack is a business software and to get your question more than exhibition, I would post in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Adding new user limited now that it is the only account that I can connect to

  I can not connect as administrator on my windows xp pro 2002.  After you have configured the new limited user can't access a login screen other than my limited user account.  I did some research and tried several fixes. all to nothing does not.  Here are some of the things I did to remedy the situation and what happened:

  1. on the Welcome screen, click ctr, remove ALT twice... Nothing happens and still allows me to log on as a limited user
  2 enter the hidden in safe mode administrator account.  When you connect in safe mode, it asks that I choose a user in the list... There are no users listed.
  3 download Tweeku, allow me to download this program, or any other file .exe "NOT a VALID WIN32 APPLICATION".
  4 4 changer change username, log in, etc.  All don't allow my same limited access account
  5. I tried to many other fixes as well, all with access denied... any privledges.

  Bottom line... If I could do to an empty login screen, I would be able to login as administrator.  I note that in user accounts in Control Panel there is only my limited user listed but in virtue of the computer/administrative management tools there are my admin and accounts admin hidden as well as a few others but all have been disabled except the limited user account.   I'm out!  Any help/advice would be greatly appreciated.

  Malekeah: Who is better than you?  Answer, PERSON, you are the best.  I'm at my account admin thanks to you.  I had loaded the wrong driver on a floppy disk.  Yet once, thank you for having these considerable knowledge and share with us.

  All my best,
  Upper Kimball / Peter

• Hardware or VM Limitations? Free version? Help me please!

  Hello guys. Former user of IM of Citrix XenServer and now ill try to use VMware.

  But I have a lot of questions, and I couldn't find a clear answer to my questions.

  On XenServer, I have this: http://www.Citrix.com/products/XenServer/features/editions.html

  Where I can see what the free version.

  But to use VMware, I found this:

  From this link: http://www.VMware.com/products/Datacenter-Virtualization/vSphere/compare-editions.html

  The free version is the standard?

  I see that the free version supports up to 32 GB of RAM.

  This limit is 32 GB of ram for the entire server or to say that I can create virtual machines with up to 32 GB of ram?

  If I have a server with 64 GB of ram, can I create a virtual machine with 32 GB and 2 other virtual machines with 16 GB of ram?

  The hardware limitation of the free version is only ram or there another limit?

  Thank you!

  Hello

  the standard is not the free version. The free version is called "vSphere Hypervisor. You can find the requirements and limitations here:

  http://www.VMware.com/products/Datacenter-Virtualization/vSphere-hypervisor/requirements.html

  As noted in the link, the physical server cannot have more than 32 GB of RAM.

  Other limits are, of course, you can't use the fancy features everything you see in your comparison table.

  Concerning

• is this setting for VMs cpu limitation cause performance hit for ESX server?

  We had recently come vmware consultant do a health check.  One of the things he mentioned briefly that we should change is that we should remove the limitations of cpu that we fixed for VMS.  His reasoning is that it causes needless overhead on the ESX servers.

  I was wondering what were the thoughts of everyone on this, I thought that the limitation of the cpu was a good thing because he stopped to a virtual machine in addition to cpu utilization... All opinions are appreciated.

  I agree with shishir08 here, the limits should be carefully thoughtover and only be implemented for specific vm:s.

  Why limit a machine if there are resources available for this purpose to consume?

  However, I think that the actions and reservations always should be applied.

  Linjo

• Configuration of the ADF transactions

  Hello

  To understand how work the various operations of the ADF, so I created a demo application to try a few scenarios. There was some behavior not expected according to my understanding and expected behavior. If I put my findings here, hoping to solve the mystery of the transaction in the ADF or to improve my understanding. The post is long enough, but I tried to convey as much steps in detail as possible to describe what I did and what I observed.

  The requirements of the scenario

  1. 1. destination (see BTF) pages should never control a transaction
  2. 2 application should be able to scale up to 250 simultaneous users
  3. 3 edit task flow must be reusable to complex business processes

  Abbreviations Used

  1. 1. UETIP = use of existing if Possible Transaction
  2. 2 ABNT = always start a new Transaction
  3. 3 NC = no Transaction Controller

  Scenario 1

  Requirement: Display pages should not control a transaction

  Name of the workflow task	Setting of the transaction	Data control setting	Fragment used	AM using VO
  VIEW_EMP_BTF	UETIP	Shared

  allEmployees

  1. EmployeeAMDataControl.EmployeesView

  EDIT_EMP_BTF

  ABNT

  Isolated

  editEmployee

  1. EmployeeAMDataControl.EmployeesView

  VIEW_DEPT_BTF

  UETIP

  Shared

  allDepartments

  1. DepartmentAMDataControl. DepartmentsView

  EDIT_DEPT_BTF

  ABNT

  Isolated

  editDepartment

  1. DepartmentAMDataControl. DepartmentsView

  Nested used AM: No.

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: + 1
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: + 1
  6. 6 edit Department
  7. 7 go to the tab edit used
  8. 8 commit used
     1. a. active connections DB:-1
     2. b. change visible in DB data
  9. 9 go to the tab Edit Department
  10. 10Department of rollback
      1. a. active connections DB:-1
      2. b. data unmodified in DB

  Conclusion

  1. 1. expects behavior that supports my understanding.
  2. 2 concern that edit BTF are isolated, which inhibits their reuse in the process of complex transaction.
  3. 3 a simple use case that uses 3 DB for a single user connections does not appear effective.

  Scenario 2

  Requirement: Display pages should not control a transaction

  Name of the workflow task

  Setting of the transaction

  Data control setting

  Fragment used

  AM using VO

  VIEW_EMP_BTF

  NORTH CAROLINA

  Shared

  allEmployees

  1. EmployeeAMDataControl.EmployeesView

  EDIT_EMP_BTF

  UETIP

  Shared

  editEmployee

  1. EmployeeAMDataControl.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentAMDataControl. DepartmentsView

  EDIT_DEPT_BTF

  UETIP

  Shared

  editDepartment

  1. DepartmentAMDataControl. DepartmentsView

  Nested used AM: No.

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: + 1
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: no change
  6. 6 edit Department
  7. 7 go to the tab edit used
  8. 8 commit used
     1. a. active connections DB: no change
     2. b. employees data visible in DB change
     3. c. data Department change visible in DB
  9. 9 go to the tab Edit Department
  10. 10Department of rollback
      1. a. active connections DB: no change
      2. b. changes to the service as validated by committing the employee changes

  Conclusion

  1. 1. shouldn't the behaviour that supports the understanding
  2. 2 my understanding;
  3. a. from the view of different reference AM fragments that are not nested, they should both be instantiated as the root application modules and consume a DB connection, what they do, in fact
  4. b. fragments edit referencing the same AM.s as fragments of view then join these 2 separate operations of DB which, according to my understanding, control independent of the other transaction
  5. c. this should allow;
     1. a. only the changes to the employee to be committed
     2. b. changes Rollback of the departments
  6. 3 what really happened;
  7. a. the edit workflow completed two transactions
  8. b. Swapping sequence by opening first modify it Department BTF and then the Edit used BTF, change in workflow Department controlling the transaction

  Scenario 3

  Requirement: Display pages should not control a transaction

  Name of the workflow task	Setting of the transaction	Data control setting	Fragment used	AM using VO
  VIEW_EMP_BTF	NORTH CAROLINA	Shared	allEmployees

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  EDIT_EMP_BTF

  UETIP

  Shared

  editEmployee

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  EDIT_DEPT_BTF

  UETIP

  Shared

  editDepartment

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  Nested used AM: Yes

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: no change
  6. 6 edit Department
  7. 7 navigate to change employee tab
  8. 8 commit used
     1. a. active connections DB: no change
     2. b. employees data visible in DB change
     3. c. data Department change visible in DB
  9. 9 Department of rollback
     1. a. active connections DB: no change
     2. b. changes to the service as validated by committing the employee changes

  Conclusion

  1. 1. shouldn't the behaviour that supports my initial understanding, but after working in all scenarios, it might be expected behavior.

  
  Scenario 4

  Requirement: Display pages should not control a transaction

  Name of the workflow task

  Setting of the transaction

  Data control setting

  Fragment used

  AM using VO

  VIEW_EMP_BTF

  NORTH CAROLINA

  Shared

  allEmployees

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  EDIT_EMP_BTF

  ABNT

  Shared

  editEmployee

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  EDIT_DEPT_BTF

  ABNT

  Shared

  editDepartment

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  Nested used AM: Yes

  Measures

  1. 10menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 11menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 12VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 13edit used
  5. 14VIEW_DEPT_BTF > > EDIT_DEPT_BTF
  6. 15error: ADFC-00020: workflow "/ WEB-INF/flows/dc-transaction-edit-department-btf.xml#dc-transaction-edit-department-btf" requires a new transaction, but surgery is already open on the framework.

  Conclusion

  1. 1. not what I waited, but what I've been through since the previous, scenarios I can understand why this is happening

  Summary

  1. 1. for 250 concurrent users and efficient transaction handling requirement I need to set up the operation as follows:
     1. a. working view controller Transaction + isolated streams
     2. b. the edit to use existing if Possible Transaction + Shared workflow
  2. 2 this configuration for the number of concurrent users requires an initial 500 connections to database server configuration if each user opens the two use cases at the same time. As this might not be the only functionality provided by the application, I would need a very large number of database connections, who defeated my scalability requirement.
  3. 3 so of course, my understanding and approach might be incorrect.

  
  

  Concerning

  
  

  Leon
  

  Hi Leon

  Well, you made my Friday, it was fun to go back and explore all of these scenarios.  I'll emphasize again Bravo on writing your scenarios in detail, but clear, it contributes greatly to talk & study the problem and not spend time deliberating on the description of the problem that is so often missing on these forums (index other readers - you want to help, write better questions).

  To test the scenario 2 I built the following request on the HR database.  I joined this 11.1.1.7.0 so we could test for constant behavior in 11.1.1.7.0 and 12.1.2.0.0 by migrating to the top:

  https://DL.dropboxusercontent.com/u/12154176/TransactionsFun.zip

  (It is a temporary location, please take a local copy)

  You will notice to reproduce your scenario and work on what's happening:

  (a) I do not use the shell of the user interface.  The shell of the user interface makes it difficult just to its existence.  Generally whenever I get in a transaction number with the shell of the user interface, I rather to build an application with 1 page, 2 BTF incorporated as a region.  This simulates what the shell of the user interface attempts to reach without getting caught upward in discussions all about 15 tablets or the difference between browser tabs and the UI shell.  Ultimately the shell UI is just a region multi page.

  (b) on each fragment in the BTF, I've included output on internal information reveal for the Working Group:

  Name of the current task flow

  The current data from workflow to control scope

  Current transaction option task flow

  Name of the control framework the current data from workflow

  Current frame control task data stream attached the names of data control

  The current image name of control transaction workflow data

  Task data flow control current frame is dirty transaction

  Control of data data frame name control and attached names was very helpful in revealing what was going on.  If you run the example, look at the name DCF in these two areas and look at what data controls are attached to this DCF you will see same DCF is used depending on the region and the same AMS are grouped under this a DCF.  Thus a validation on a workflow commit the DCF and all the associated root bound AMs.

  Return therefore to scenario 2, the sample application that I conclude this framework is properly, because:

  As scenario 2 introduces a UTF DCF, DCF is then shared between BTF all because they all use a scope of control of shared data.  When you hit your step 1 then 2, the two root AMs are together under this a DCF.  The only way to prevent this is to use a data command isolated field.

  Remember, without worrying if the BTF existing Transaction option to use if Possible, use the AFM provides the transaction limits.  If someone commits the DCF (via say a workflow task back to commit), AMs all attached that DCF will be engaged as a group.

  So when in step 8, a valid user EDIT_EMP_BTF, considers the BTF (don't forget, you have visited EDIT_EMP_BTF to step 3 front of EDIT_DEPT_BTF in step 5) her in charge of the operation through the Transaction existing use if Possible flag and no other BTF launched an operation, commit the DCF about.  As this DCF attached several AMs roots, they are all we incurred, including any changes.  By your scenario happens you have just inserted a change in both your two AMS before validation is called, so why two records are saved in the database.

  It reminds me of the stream prematurely completed task scenario.  Conceptually our transactions present leaks beyond the limits of BTF even if we defined the transaction on the BTF options.  The key to understanding these limits is the DCF.  The key to controlling this behavior and the limit of transaction uses a range of remote data control.

  This may sound strange, but there are some fun things to see in scenario 2.  A better question would be why the 2nd BTF throws ADFC-00020 when the 1st task force has already started a transaction?  This is because the BTF is using the existing Transaction to use if Possible option which I refer as the "promiscuous" BTF transaction option.  When the 1st BTF arrives, on the DCF may not see a transaction on the frame, so it starts one.  Yet when the 2nd BTF arrives, he fortunately also leave a transaction on the frame, but he finds a already so it uses this transaction.  If you reverse BTF2 to always start a new Transaction, then you will see scenario 4.

  Once again remember the scenario 4, nested ams make no difference to the scenario.  When you declare a nested I automatically ignore the nested AM and paying attention to the AM root.  For all purposes useful AOS nested has no impact on the scenarios you describe here.  It exists as a concept of design time only.

  Hope it makes sense.

  I haven't had the time to check all the less 12.1.2.0.0, I hope I have some time next week.

  CM.

• Cannot connect iPhone 5S for Macbook Pro or what I can't airdrop and seeing the pictures on my phone or other iDevices.

  Hello

  Ive tried many ways to connect my Iphone 5 to my McBook Pro without success and also cannot use the Airdrop feature all. I am running OS X El Capitan Version 10.11.6

  9 s 7-inch MacBook Pro Late 20011,

  Peocwaaoe, Inatel 2.5 Ghz Core I7

  8 GB at 1333 MHz DDR Memorty #.

  Start drive Macintosh HD

  Intel HD Graphics 3000 512 MB graphics

  Serial number C02H3122DV10

  It's the third issue that I had with my MacBook as it has been recently maintained in Greensboro, North Carolina, and he never acted the same. Thank you.

  Back to the place where you have the service of.

• ITunes sales tax

  How much tax is an album for $ 9.99 on iTunes in North Carolina?

  You can search your online sales tax rate as easily as everyone

• Capture does not work

  I just got my new growth.  I'm very excited to this topic but already running into problems.

  He did all the Windows updates and I tried to install the update of the workplace grows, but he says that the carpet is not connected. Well, it is. Everything else works. Including the piano. The capture does not work.  I tried several times, recalibrated reestarted al such things.  All I get is a long delay, then a message with an error code: #A00904CD.

  What can I do?

  OK, today received the recovery media. 24 hours, it was fast!

  Do you have a reset and everything works now! (at least I could test this evening)  Apparently, I had all the wrong software in my germ.

  Thanks a lot for all the input.

  NORTH CAROLINA

• Who can call my number online?

  I live in the South, New Zealand island. The nearest major city in the South Island is: Christchurch and I can buy an online starting with the prefix 03 number. Can people from other parts of my country call me on my number online, for example from Auckland or Queenstown?

  I live in North Carolina, USA. My functions on line number as a regular phone number. Anyone in the world can call (using the code of American countries initial prefix of course).

  I even created call forwarding on my online number to ring directly to my cell phone.

  I guess that it works this way even where you are.

  I hope this helps!

• Localization app issue weather channel

  The Weather Channel in my AppleTV application indicates that my position is in North Carolina, but I'm in Ohio.  The same thing is happening with the CBS all access app.  Less direct tv it shows a channel in Charlotte, North Carolina and Cleveland Ohio no one near me. Ive tried to figure out how to change locations, but had no luck. When I first noticed what I restarted the Apple TV and nothing has changed. I have also reset the Apple TV and reinstalled the apps. As location, always showed in North Carolina. Don't know what else to do. This just showed as a recent problem. When I installed first of all Apple TV several months ago, the places were very good. I did nothing that I was aware of the change. I have the latest device from Apple TV. Any suggestions to fix this would be most appreciated. Thank you.

  Make sure that DNS is set to automatic (network - general - settings)

• Why the crazy scrolling?

  My iMac has a problem that bothers me, almost - endless.  It scrolls briefly but-wildly, say in Pages.  (This happens here - in Firefox, too).

  Lately, I thought that my Internet connection could be the culprit.  (No choice of _my_, I use Internet Charter.  I live in Asheville, North Carolina).  This might be, please?

  I think it is easier to ask here & to learn if anyone else has a similar experience.  I believe that to ask here is easier to test myself.  (It is advisable to writing.)  Thank you.  :-)

  If your on your laptop and use the trackpad try cleaning it

  https://support.Apple.com/en-us/HT204172

  If you use a mouse, you can adjust the settings in  > preferences system... > mouse

  If they appear to be nominal and are still having the problem of the mechanism in mice may be at fault. Try to replace it with a different USB mouse if it is available to try.

  I do not think that your ISP is the culprit. Charter may be rubbish, but NC is full of shit providers, mine included, and I wouldn't be surprised if Knobby could provide me better service.