MDX. Get mebers 0-level of a hierarchy

Similar Questions

• Get consistent audio levels

  I have ben to do a family film on the year for the last 7 years. I'm just an amateur, but I'm a little bit better. This year I really want to improve my skills on audio.  I know the basics, like the volume control for individual items, a beach in a clip of setting and so on, let never greater than 0 db noise and so on. What I would really like some help with is how to get consistent noise levels. What I mean is this: Let's say that I have 30 clips in my calendar, I select all and set the audio to-6 db. Even if the clips now how the same audio level, clips are noisy, and some are low. What I have to go through each item and set - if so what I'd be looking to make all points to the decibel even? Use the waveforms and my eyes and try to align the shapes so that they are at the same level, or is there a simpler solution?

  -No hear/see the chronology of first hand, we can only give limited advice.  But now.

  -Each clip is saved to its own level of gain.  Some are recorded louder than the others.  0 dB means simply the level of this specific "native" clips  The gain setting on all at-6 change each clip-6 dB, it doesn't make them not all limited to-6db.  This is called a limiter filter.  So, if you want to limit each clip compared with - 3db (never press 0, stay below to about - 3 dB max), apply a limiter.

  -Do not rely on the airwaves of the timeline, they are not absolute, but relative approximations.  Go by the counters, and then by the ears.

  -Compressor filter would go a long way to limit upper and lower levels, both win.  Where a limiter limits only the higher gain level.  Beware, a compressor to reduce the dynamic range.  This means that the quiet parts and hard parts approach is at the same level, which causes an artificial sound production.

  -For the application of filters for all clips at once, with the same settings, apply to the first clip.  Copy this clip.  Select all the other clips in the timeline panel.  Use the paste attributes to put in all the other clips.  OR, put all the clips in a compound Clip, apply your effects, keyframes, filters for this compound, to all media at the same time.

  -Actually, a professional like me, takes time to work each clip, or absolute similar clips individually, groups for best results.  Any button 'make fast all at once' will achieve inferior results.

  -Here is a link to the logic manual that explains all the audio effects that are both logic and Final Cut Pro X.  Some very good information here.

  http://help.Apple.com/LogicPro-effects/Mac/10.2.3/

• How to get the battery level and status in the cpp file?

  Hi all

  BatteryInfo class so I can I know how to get the battery level and the State in .cpp class?

  Hi Benecore,

  I have Add method below,

  #include

  But I only variable BatteryInfoPrivate not get variable BatteryInfo. You can also check on your side.

  So let me know how to get batteryInfo instance?

• Is it possible to create the formula at the level of the hierarchy?

  Dear all,

  In case, I've dimension branch consist of region, sector, branch

  And I have 3 measures Region_target, Area_target, Branch_target

  I want to create new metrics and check if members at the level of the regions, would like to show Region_target measures

  And also for the region and the target.

  So I tried to write the case where the formula, but impossible to refer to the level of the hierarchy, Ho can I do?

  Something like

  Case when the level. Branch_Hierarchy = region then Region_target

  When the level of . Branch_Hierarchy = area, then zone_target

  of other Branch_target

  end

  Please advise, my problem is to only synchronize the targets for each level. Target of all the branch cannot amount to area and target of any region cannot amount to the region.

  Please notify.

  Thank you

  What you're looking for, it's 'level based on measures '. Basically, you'll logical columns called 'Target' that has 3 sources from 3 LTSS - one for each level.

  LTS 'Target area' level 'Région' is the physical column "Region_target."

  LTS 'Target area' level 'Space' is the physical column "Area_target."

  LTS 'Branch target' level 'Branch' is the physical column "Branch_target."

  You are faced with one of the main features and capabilities of OBI: the power of the LTSS and levels in the business model and of the mapping layer. It is crucial to understand these concepts. It's what separates OBI of all other solutions out there.

• How can I get my ink level automatically when I go to my eprint application

  How can I get my ink level automatically when I go to my eprint application

  The Hp printer control application is the only application that allows you to check the ink levels. This application is only available for iPhone, iPad and iPod touch IOS devices. To check the ink with app levels you must select the printer and supplies info.

  I hope this helps.

• OBIEE BI answers: measures bad aggregation at the top level of the hierarchy

  Hi all,
  I have the following problem. I hope to be clear in my English because it is somewhat complicated to explain.
  
  I did following:
  
  ID of drugs classified in quantity
  1 9
  2 4
  1 3
  2 2
  
  and drugs following table:
  
  Drug brand Id brand Description drug whose active ingredient Id drug whose active principle Description
  Aulin Nimesulide 1 1
  2 Asprina 2 Acetilsalicilico
  
  In AWM, I've defined a Dimension of drugs based on the following hierarchy: drug whose active ingredient (parent) - brand name of medication (sheet) mapped as Description:
  
  The active ingredient of drug = drug Active ingredient Id of my Table of drugs (pharmaceutical = Description of the active ingredient LONG DESCRIPTION attribute)
  Pharmaceutical brand Description = drug brand Id of my drugs Table (LONG DESCRIPTION = Description of drug brand attribute)
  
  Indeed, in my cube, I have traced pharmaceutical leaf-level brand Description = Id of the drug of my fact table. In AWM drugs Dimension is mapped as Sum aggregation operator
  
  If I select on answers drug whose active ingredient (parent of my hierarchy) and the quantity, in my view, after the result
  
  Description of the active ingredient drugs classified in quantity
  Acetilsalicilico 24
  Nimesulide 12
  
  indeed of the correct values
  
  Description of the active ingredient drugs classified in quantity
  Acetilsalicilico 12
  Nimesulide 6
  
  EXACTLY the double! But if I dig drug Description of the active ingredient Acetilsalicilico I can't see correctly:
  
  Drug whose active ingredient Description pharmaceutical brand classified in quantity Description
  Acetilsalicilico
  -12 Aspirina
  Total 12
  
  Aggregation of evil is only at the top level of the hierarchy. The aggregation on the lower level of the hierarchy is correct. Perhaps the answers also amount Total line? Why?
  
  I'm frustrated. I ask your help, please!
  
  Giancarlo

  OK your on 10G but the view of the cube and the obligation to limit the levels in the LTS in the RPD is valid in both.
  I think we found the problem,
  Go to each source logical table this logic table (x 2 in your case you have two levels) and on the content tab, window background ' use this "Clause Where" filter to limit the rows returned. »
  Open the expression builder, locate LEVEL_NAME according to your cube and limit accordingly, it is to say LEVEL_NAME = "BRAND_DESCRTIPION" for the aggregation BRAND_DESCRIPTION LTS and LEVEL_NAME = "XXXX" in detail, SFF, where XXXX is the name of level of hierarchy in your cube for details (leaves) records.

  Can you try that and let us know?
  Thank you
  Alastair

• determine the level of the hierarchy

  Hi guys
  
  I am able to identify the level of hierarchy using the blog of john
  
  http://obiee101.blogspot.com/2009/03/OBIEE-identifying-hierarchy-level.html
  
  but the problem now I get every time that I add another dimension column, then dim_level is empty...
  
  to get the job of above problem, I dragged a new dimension to my table in MDB layer source and created the inner join to my table of basic facts using the general tab in the window source logical table... but still, I'm empty dim_level...
  
  Please help me solve this problem
  
  Thank you
  
  Edited by: User0007 on June 28, 2010 04:46
  
  Edited by: User0007 on June 28, 2010 06:23

  Seems there was a part to join in the blog article in the missing item, you must add some dummy joints, I've updated the article. See: http://obiee101.blogspot.com/2009/03/obiee-identifying-hierarchy-level.html

  Thanks for the comments!

  concerning

  John
  http://obiee101.blogspot.com

  Published by: John Minkjan, June 28, 2010 09:56

• Allowing entry of the value of a property at the level of the hierarchy and restricting to whole new level.

  Hi all

  I have two property definition Custom.Levelnumber and Custom.Allowattribute which are the goods as well as Local property node level.

  I want validation to restrict the user to allow any value for the Custom.Allowattribute property for any level of hierarchy other than level 6 i, e Custom.Levelnumber with the value 6.

  all other classes in the hierarchy must have an empty value for the Custom.Allowattribute property.

  Hi Madhu,

  Try this-

  If)

  Not (Equals (Integer, PropValue (Custom.LevelNumber), 6));

  Not (IsDefinedPropVal (Custom.Allowattribute, ABBREV (())).

  True)

• get the entity level validation error after clicking the Cancel button

  Hi Experts,

  JDEV 12.1.3.0

  I have a popup and I create several rows in a table. And when you click on CANCEL, I get the validation error level feature on the home page.

  Cancel call the method below and also set immediate = "true".

  /*

  * return allchanges

  */

  {} public void refreshRemoveNewRow (rank)

  If ((row) .getNewRowState (ViewRowImpl) () == Row.STATUS_INITIALIZED) {}

  Row.Refresh (Row.REFRESH_UNDO_CHANGES + Row.REFRESH_REMOVE_NEW_ROWS + Row.REFRESH_FORGET_NEW_ROWS);

  } else {}

  Row.Refresh (Row.REFRESH_UNDO_CHANGES + Row.REFRESH_FORGET_NEW_ROWS);

  }

  }

  If I try with Rollback I get Transaction has expired. My behavior of workflow is also use existing Transaction if Possible.

  Thank you

  Roy

  Hello

  Try again with

  public void refreshRemoveNewRow(Row row) {
     if (((ViewRowImpl)row).getNewRowState() == Row.STATUS_INITIALIZED) {
           row.refresh(Row.REFRESH_UNDO_CHANGES +  Row.REFRESH_REMOVE_NEW_ROWS);
      } else {
           row.refresh(Row.REFRESH_UNDO_CHANGES + Row.REFRESH_FORGET_NEW_ROWS);
      }
  }
  

  Beside that, can you post the jdev console stack trace, to see which exactly entity and validator is in question...

• How to set a limit to the level of the hierarchy

  Hello

  I use a component of the hierarchy to show a family relationship between registers and I managed to make the Parent and the child of this profile, but I want to limit the level of the child to one, which means that I only want to show the direct Childs of this profile and not the child of a child of this profile.

  Is it possible to do?

  I use jdev 11.1.1.7.1

  Thank you

  You can add buttons/links in knots - and these buttons can manipulate the model that drives the HV and add/remove items.

  If you are looking for something that will allow you to 'paint' graphically relationships - take a look at the diagram component:

  http://jdevadf.Oracle.com/ADF-richclient-demo/faces/feature/diagram/index.JSPX

  https://docs.Oracle.com/CD/E50629_01/ADF/DVTTR/tagdoc/dvt_diagram.html

  https://pinboard.in/search/u:OracleADF? query = % 3Adiagram dvt

• problem in the estimation of levels of dimension hierarchy

  Hello
  
  
  I m getting an error when trying to estimate the levels in DimensionTemps... Details of the error below.
  
  I have
  DimensionTemps
  "DIV". "" "" DimensionTemps '. "" An"= 28
  
  
  ERRORS
  "DIV". «"" "DimensionTemps '." neighborhood "<-has no consistency for this level check»
  "DIV". "" "" DimensionTemps '. "" Months' <-has no consistency for this level check
  "DIV". «"" "DimensionTemps". ' week ' <-has no consistency for this level check»
  "DIV". «"" "DimensionTemps". ' days ' <-has no consistency for this level check»
  
  
  
  I tried to update manually.
  
  Then get a warning like "time dimension defined inconsistent values in its number of levels of items property."

  Make sure you're higher level values are lower than the lower level key value...

  As always most weak compare to its highest level has more values...

• Limit the levels of the hierarchy

  Hello
  
  Can someone tell me, no. max caught levels supported by OBIEE in a hierarchy. Max without dashboards OBIEE taken in charge for the drop-down list.
  
  Thanks and greetings
  
  Sandy

  There is no limit on the number of levels

  However if you have a master report (which has a drill on a single column) where you navigate a transaction report.

  Oracle has a bug where in after level 12 it does not pass the valoe report sailed.

• Creation of aggregates at a higher level in a hierarchy

  Hi experts,
  
  Please consider below 2 physical tables for which a subject has been defined.
  
  Geography
  ---------------
  Country
  Group of countries
  Country region
  
  Facts
  -------
  Country
  Volume
  Value
  
  Now, I would like to add an aggregate on the region of the country.
  
  Aggregate
  ---------------
  Country region
  Volume
  Value
  
  My question is weather, I also have to create a new dimension table (as I have done currently and which works very well) 'Country' (joined with the aggregate), such as a second logical source for my geographic hierarchy logical or is it a way to reuse the physical table existing 'geographic hierarchy.
  
  A quick test to join the tables in the country region gave the incorrect following result in answers as he was increasing the number of records in the result with the number of the country:
  
  Country region Volume
  Europe 500
  Europe 500
  Europe 500
  ...

  Need to have in the dimension level tables above the physical layer, if you intend to work with the aggregation tables, I know, because if your table is overall a granularity region then this table of dimension level with the level of the region is for obiee decide what to join when you set up a model in MDB correctly as you did It's faster and you are bypassing the main dimension.

  You don't need to have this large level of database table, but you can do in the new table of physical physical layer as select and write the code, select distinct, region_id region_name of geography and join this high-level table dimension with the aggregated fact via region_id. OBIEE table will generate this statement to data bases and make the join , but then you aren't bypassing main dimension. Better to put this on the database, create indexes, etc.

  The Oracle HR user has table of REGION that contains region_id and rated.

  You can make the aggregates in obiee mannualy as we did here, or you can use the wizard of overall persistence:
  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/aggpersist/aggpersist.htm
  http://www.rittmanmead.com/2007/10/26/using-the-OBIEE-aggregate-persistence-Wizard
  http://obiee101.blogspot.com/2008/11/OBIEE-aggregate-persistence-Wizard.html

  Or you can use materialized views, the query rewriting, etc.

  Take a look at this (OLAP source logical table friendly, fragmented, copies of the same physical object):
  http://www.Oracle.com/technology/OBE/olap_biee/CreateBIEEMetadata.htm

  Concerning
  Goran
  http://108obiee.blogspot.com

• I use the latest version of Firefox, but get message at level because wesite will not open as it thinkgs I use an older version

  I constantly get messages that say that I do not use the latest version of Firefox and then do not display properly. I use v3.6.3 and get this message on many sites I visit.

  Just noticed that in the assumptions below - even if it thinks I'm using the version of Firefox v2.0, which is not correct.

  URL of affected sites

  http://www.ebookers.com/shop/home

  You're welcome =)

• How can I get the volume level bar back which was above my bar spots?

  I had this working OK last week, but I have changed a few settings. In fact, I got someone on this site to help me to restore the Volume control icon in my taskbar. I must have done something to remove it when I did my clean install of Windows XP and more.

  So there is a little volume thing that appears above the taskbar when I clicked on the volume upward or down arrows on my keyboard. But for some reason, which does not appear now. I know I messed with all my volume settings a lot so I could keep my volume high enough to listen to music on my pc, but not to blow up with Bang and pc sounds.

  I even had someone here teach me how to adjust each individual windows sound on my Cigma such C - Major Audio to control panel > sound & Audio Devices > sounds. I put them all at ZERO for a while, but I turned their back on now since I missed them too!

  So, how can I get this small volume return display?

  Open Control Panel and click on the sounds icon. Now you can activate the option to display the Volume icon in the taskbar.