Question about the extension of RAM for Satellite A50-522

Similar Questions

• Question about the extension of RAM on Satellite M30X 163

  Hello

  I can install it as an extension of RAM on my laptop model?
  I have now 2 x 256 MB (default factory equipment).
  I'd appreciate any help about my question:
  Type, frequency, the maximum capacity for each of the 2 slots?

  Thank you very much.

  Hello

  According to the specification for laptop, your laptop can handle with 2 GB of RAM and 1 GB of RAM followed the part number - PA3313U-1M1G. Put this number in Google and you will find info on this compatible RAM module.

  To avoid compatibility problems, I recommend using the compatible RAM only.

• Question about the compatibility of memory for Satellite A100-496

  Hello

  I have a Satellite A100-496, which States:
  Memory type: DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM
  The next memory will work or not

  Specifications:
  Total size: 2GBMB
  Type: DDR2 SDRAM
  Form factor: DIMM 200 pin
  Memory speed: 667 Mhz (PC-5300)
  CASE latency: 555-12
  Unbuffered memory
  Non ECC
  1, 8V (+/-0, 1V)

  Concerning

  I don't know who is the manufacturer of this module of RAM, but I hope that you use high quality products. Unfortunately I can't test with my Satellite A100, but I think you can use this RAM module.

  According to some reports here on the forum, maybe you will have problem to make it work with a former RAM module. Test it please and please let us know how it works.

  In any case, I think you need to use the 100% compatible module. If you want to check here

  Good bye

• Where to get the recovery for Satellite A50-522 CD?

  Hello world
  Can someone tell me where I can buy a recovery for my Satellite A50-522 CD?

  Gracias

  I agree with alphaleader, all portable devices, parts, and also the recovery CD can be purchased from the ASP in your country.

  Check the path shown above and you will find a page with ASP database in the world.

  Best regards

• Help with the driver DvD Ram for satellite P10

  On my laptop (satellite p10) is Windows 2000 Professional running, but the driver DVD Ram of the Toshiba Homepage does not...
  Where can I get a driver that works on my laptop?

  Hi Val,

  The correct driver for your laptop running Wnidows 2000 should be version 3.0.8.0 and is available for download from the Web from Toshiba website.

  I presume that it is the one that you tried, so I don't know what you mean when you say that "it doesn't."

• Questions about the Extension of JavaScript and SQLite

  Hi all

  I worked with some my colleague on projects related to WebWorks applications, but there are technical issues that our developers want to know and seek professional advice.

  (1) extension JavaScript & PlayBook

  According to the literature, we know that BlackBerry WebWorks Application have the ability to integrate with data, characteristics and features of the development environment Java® underlying as well as the native phone smart BlackBerry® using special JavaScript® (Extension of JavaScript) objects. So, we should be able to create® for Java (JAR) libraries and program the WebWorks app for BlackBerry Java API to call in libraries. Now, we know that BlackBerry® PlayBook provide a SDK WebWorks (Beta) for us to develop apps for PlayBook WebWorks, also means that in the environment of the PlayBook we can also use the JavaScript Extension trick to call the Java API of BlackBerry?

  (2) SQLite on HTML5

  HTML5 standard offer of SQLite for us to store data in a SQLite database format. But the SQLite file seems limited only to be used in the Application of WebWorks. I wonder if there are ways we can read these file to another application (Application Java or other applications WebWorks) SQLite?

  In fact, what I want to know is the possibility of having a WebWorks Application capable of handling a SQLite file that is received from the server side on-the-fly, and then return the entire SQLite file to the server.

  It would be appreciated if some of you can give some tips about this, thank you.

  Wowzzz

  lasterra is right about these two points...

  We have not yet published the details on creating extensions in the AIR for WebWorks on PlayBook. We are currently working to finalize the open source on the WebWorks for PlayBook SDK so that we can download on github.  The complete source code for the platform will be available on github so that you can see what's going on under the hood.

  Creating extensions in the AIR for WebWorks is very different from Java. We started to use a new architecture that should be able to provide the URI and proceedings access to APIs and placing more procedural API code in JavaScript itself vs. the ScriptableObject Java code existing today.

  This new architecture will be a foretaste of the platform architecture WebWorks to proceed.

  It welcomes more details about creating extensions in the AIR... but currently the API underlying main platform on the BlackBerry PlayBook is AIR and the functionality of an extension will be limited to what is possible on the AIR platform and its extensions.

  In the development of the PlayBook options evolve, so too will be the architecture of the platform WebWorks... I can't really say much more than this now

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Question about the Y510 AHCI drivers for install XP

  NiHao Lenovo Forum,

  I am a proud owner of your IdeaPad Y510. I just wanted to ask what the web page offers Lenovo the AHCI storage driver to activate the storage controller SATA on the motherboard for my laptop Lenovo IdeaPad Y510?

  I ask because Y510 as many users who install the XP will need to have these storage SATA controller drivers if they want to support higher speeds, hot plug and native command queuing (NCQ).

  I see that Lenovo provides the following AHCI drivers for ThinkPad found here:

  www-307.IBM.com/PC/support/site.WSS/MIGR-62909.html

  Also, it would be useful to let everyone know that Lenovo Y510 models come with what advice system that they have, with regard to the necessary SATA AHCI Controller driver for them.

  I see the ThinkPad models use Intel 82801GBM SATA AHCI Controller or Intel 82801HEM/HBM SATA AHCI Controller as indicated above from the URL.

  How can I check my Y510 to know what Intel SATA AHCI Controller is necessary here?

  Some clarification would be useful. Thanks in advance for any help and assistance here.

  Also another method here would not create an installation with the Intel Matrix Storage Manager drivers slipstreamed XP disc? And how does a person know which of the many Intel Matrix Storage Manager drivers should be slipstreamed to the pilot Y510 AHCI SATA Controller here?

  And how many different models of Lenovo Y510 uses different system boards? Think there are at least two, because some have been announced with a FSB 800 MHz right?

  Thanks for any help and support here in advance.

  Read the FAQ some might answer your questions.
  Also, I suggest that different motherboards are in different models, as I said there are even different colors - green and Brown motherboards there. Brown, I saw myself - those who are ASUS, green are unknown for me.
  Then, NCQ is not a feature of driver software. It is a material of HARD drive capacity to optimize movement traectory leaders to speed up the read/write process. So, no driver is required to activate. This work iven in the BACK.
  AHCI driver is inside driver chipset. Also, you can integrate it. Please, read the FAQ .
  HTH

• A question about the size of Swap for Oracle 11.2

  Hello everyone
  
  I want to install Oracle Rac 11.2 on 2 Server with 22 GB of RAM each.
  
  Reading Exchange according to the requirements of the Infrastructure of grid for Linux, I found this:
  
  Between 1 and 2 GB-> 1.5 times the size of RAM
  Between 2 GB and 16 GB-> equal to the size of RAM
  More than 16 GB--> 16 GB
  
  The requirements of database for Linux 86_64 of reading:
  Between 4 and 8 GB-> 2 times the size of RAM
  Between 8 and 32 GB-> 1.5 times the size of RAM
  Over 32 GB--> 32 GB
  
  
  Then, with 22 GB, follow the requirements grid: 16 GB and database requirements: 33 GB
  
  Should what size I get?
  
  Thank you very much

  This is how I read it.

  Best regards

  mseberg

• A general question about the stylesheet XSL - FO for BI Publisher

  Hello
  Of BI Publisher MS Word Add-in, there is a menu item that allows users to export my. Model RTF as an XSL - FO stylesheet. This provide great flexibility to users so that they can implement the most comprehensive features/features, which are not covered by keys/menus of Word Add-in, on their report. Now my question, how can reuse us this XSL - FO file (.) XML) when we finished editing on this subject? I tried to use the web client BEEP to download as a template of report TONE repository file, but it doesn't seem to work. Could someone give me an idea of this? There must be a way to deploy the XSL - FO stylesheet for model data BEEP otherwise, the item of menu "export" in word add-in becomes meaningless.
  Thank you very much.

  Just download the files you said.

  and click the new button at the top, it will create a new model with the name "new model".
  You have to assign one of the template you downloaded for this report. in this, there is an option as 'TYPE '.

  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e10416/pptoutput.htm

• Questions about the extension of my wireless network

  I have an active Airport Extreme router and work well, but in some parts of the House, the signal is not strong and television puts buffering all the time (every five minutes).

  So I bought a second thought extreme airport to expand my network.  But I do not seem that it is correctly configured.

  Can you please help?

  (1) if BOTH routers be separately connected to the internet? or the other should be wireless talk to first?

  (2) must have both routers have the same name or different names?

  (3) if they have different names, we will see the two networks as we move into the House? The connected device (phone for example) will have to switch from one to the other networks?

  Thank you

  Joyce

  (1) if BOTH routers be separately connected to the internet? or the other should be wireless talk to first?

  Certainly the second... it is connected by wireless and extends wireless... That is to say there is no ethernet... However, you can make another type of configuration... Please tell us if there is ethernet available where you want the second AE located.

  (2) must have both routers have the same name or different names?

  They have names... but even wireless name different base station.

  (3) if they have different names, we will see the two networks as we move into the House? The connected device (phone for example) will have to switch from one to the other networks?

  When you extend wireless that they use the same name and you will not even know what unit you are connected to.

  Try again install... reset factory EI and place it in the same room as the main AE... and to run the installer... It should pretty well automagically select wireless configuration expand properly.

  Place then the second AE where it becomes the first good signal, but can still extend that to your dark area... wireless wise.

  Please post again if you try to do it with ethernet between the main and the secondary airport.

• Satellite P200-1BA - questions about the HARD drive RAM upgrade

  There is a 2nd internal HARD drive Bay, but not a female connector. Can I install it? How?
  There are 2 slots for RAM, all together 2 GB. Is it possible to exit an and instead place a token 2 GB to 3 GB total or should I always double channel pair RAM?

  It is not possible to install the second HARD drive. The laptop box is universal for all models P200, but some of them are delivered with 2 drives hard HDD upgrade is not possible.

  With the RAM modules, you can do what you want. To be more precise, YES! You can remove a 1 GB module and put 2 GB RAM. Please just use high quality Rams and not some products without name at low cost.

• Extension of RAM for Satellite 1900 704

  Hej all

  I own a Satellite S1900-704 for years and I have a lot of luck with it with Debian Linux running.

  Last week, I've assembled a 160 GB Hitachi HDD which works very well. Now, I want to increase the RAM.
  The laptop is equipped with 2 pcs of 256 MB of RAM 512 total MB of course. I read that it is possible to set 2 pcs of 512 MB instead which would increase the total RAM of 1 GB. My question is: can I put in 2 pieces of 1 GB to 2 GB total? I can't find any confirmation for this...

  Thanks in advance!

  Boris

  > Can I put in 2 pieces of 1 GB 2 GB total.
  No, to my knowledge, this is not possible.
  The memory of the Satellite 1900 704 can evolve upward at 1024Mo max.
  In this case, you can use the memory 2 x 512MB max modules!

  The laptop won't work with 2 GB of memory: (unfortunately

• Question about Windows XP CD home for Satellite A105

  I have an A105 Satellite and recently it started running very slowly. With most of my machines I would wipe and rebuild them (all my data is backed up) but I don't have a CD Windows XP Home (it didn't is come with the laptop such as Windows has been pre-loaded - I think that this is the norm?).

  Is there a way to create the CD of the laptop or can I apply for a Toshiba?

  Thank you

  Steve

  Hello Steve

  Laptop computers are generally preloaded with the settings and also delivered with recovery media. Maybe in your country you can get laptop cheaper without the recovery CD. I don't know about you.

  What you can do is contact the partner of service allowed in your country and ask if they can order one for you. I'm sure that it should be possible.

• Question on the slots of RAM on Satellite P200

  How to increase the ram to 2 GB (1 GB + 1 GB) to 4 GB?
  Satellite P200 has 4 slots and I add ram 1 gb + 1 gb for the unused slots, or only 2 slots and I need to replace the ram of 1 gb + 1 gb to 2 gb + 2 gb?

  Hello

  AFAIK all models of Toshiba laptops have 2 RAM slots. If you want to have 4 GB of RAM, you must RAM 2x2gb module.

  If I remember well in users manuals description of the RAM upgrade on your laptop Satellite.