Get consistent audio levels

Similar Questions

• For dissemination of TVC video bit depth? (and the request for audio levels)

  Bit depth - does anyone know if the export to the maximum depth is a problem to stream TV?

  

  I am about to download a TV spot 30 second to Adstream and want to get some feedback on the technical specifications before making, because they charge my client by upload, so no matter what mistake I make costs them.

  I have now a few new options PPCS5.5 and TEA that I didn't have before.

  Also, anyone know the audio level required for broadcasting... When I use Final Cut Pro suites for broadcast, I learned by direct feedack of Adstream it should be less than or equal to-9 dB on the counters.

  

  So currently I export the Audition sequence then finalize the audio with the "hard limit" effect to a constant level to-9 dB.

  By the way, if anyone wants to chuck in a few tips general progress be my guest, I'd be interested to hear the thoughts of people experience.

  For animations TVC my workflow consists currently of-

  Clapper is a nested sequence

  TVC is a dynamic linked AE project

  Audio is sweetened in hearing

  shooternz wrote:

  I am in New Zealand and know the Adstream specifications.  You will find that they are very focused on the Mac.

  Don't worry "bit depth".

  Just to confirm, Adstream has accepted the material that has been treated to a 'higher bit depth"without any hitch.

  It's kind of feeling...

  Summarizing my understanding...

  Checking the box next to "make maximum depth" will make the file using all data available for the file color, but will always be 'resigned' (as you say Jim) 8-bit according to the format... (this is exactly what happens if you choose to export to Quicktime h.264 as I do for broadcast). The size of the file to finish a little more grand, that tells me that there is more data (and quality) kept in the final video (as you would expect if you check the box.)

  Here's a snipit of the media info that confirms the final bit depth = 8bits

  Format                                   : AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Identifier of the codec/Info: Advanced Video Coding

  Bit rate mode: Variable

  Bitrate: 8 614 Kbps

  Frame rate mode: Constant

  Frame rate: 25.000 fps

  Standard: PAL

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Thanks for the help!

• Melted how audio and keep the audio level in clips later

  I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

  What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

  In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

  In PE10, there is a sequence of keys which allow this behavior?

  If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

  I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

  Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

  

  Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

  In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

  Good luck

  Hunt

• iMovie - set audio levels manually extracted

  I think remember when I learned to use iMovie for years that there was a way, after extracting audio from a clip, to manually adjust audio levels in the clip. So if there were a few places in the video where the audio to be more or less than I wanted to, I could do by dragging the level a little line upwards or downwards. Is it possible to do it in iMovie ' 09? Or is the only option to change the audio level for the entire clip? I know it's possible discolor or fade out, but I'm looking for more specific control.

  You can still do.   Place the cursor on the line of horizontal volume of the audio clip, and then Option/click on it.   That will place a small point on the line

  You can go up and down to change the volume.   You can place several points along the line of volume, where you can adjust the

  volume at specific locations in the video.

• Audio level adjustment

  REALLY? ON THE FIRST GENERATION OF THE F5/55, GO TO THE MENU INSIDE TO ADJUST THE AUDIO LEVELS.

  COME ON SONY... DIFFICULTY THAT!

  I got imagaine; Press the button to THE / TC, select channel 1 or 2, and then use the select button to adjust the levels. Please don't not black the viewfinder/HDMI, display sup - sdi with an overlay of menu based on what is happening if we can adjust levels while driving. Side panel only if entered with the button to THE / TC, overlay menu if entered in the menu. The two up-down assignable button is a good idea, make an option, not the only way to control.

• To increase the audio level?

  Hi, I would like to know how can I increase the audio level of the level of 12db maximum in final cut pro x? Can I duplicate the audio track? If so, how can I do that?

  Thank you.

  UUse function audio loudness have been made. Wisely.

• Audio level of the Voice-over element does not match level of audiometers

  I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

  But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

  But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

  So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

  Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

  Tom B.

  Occasionally, I had this problem.

  The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

  Try to play the clip/s in question backward.

  I remember that DV is an offender of this audio oddity.

  Can you tell us what are the specifications of the clips?

  As much as I know this problem is not resolved.

  Al

• I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.  Can someone please?

  I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.

  Everything seems to be fine as Photos, music and home movies etc, which all are thinner, it's just the DVD playing in the slot of the iMac.

  Can someone please?

  DVDs have been blocked since mirroring due to copyright

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• where can I get the audio drivers for IBM model 8434PA4

  Original title : my audio driver where can I get the audio drivers for IBM model 8434PA4

  Hello

  need to answer,
  where can I get the audio drivers for IBM model 8434PA4?

  Hello

  What operating system is installed on the computer?

  I suggest you to check out the link next to the Web IBM site to download the audio drivers.

  http://www-947.IBM.com/support/entry/portal/downloads

  Choose the appropriate model before download the drivers. You can also contact IBM support for assistance.

• I have my Toshiba computer connected to my TV via HDMI. Video works fine, but I can't get any audio.

  I have my t.v. from tom toshiba satellite connected via an hdmi cable. Internet and work video grat. I can't get the audio signal to the TV.

  Hello

  To add a bit to the excellent advice of RajithR:

  You can check with the help of Toshiba, their documentation online and ask in their forums
  on the problems known.

  How to activate Audio via HDMI
  http://www.MyToshiba.com.au/support/items/FAQ/316

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  With the help of PC Audio on HDMI
  http://www.brighthub.com/computing/hardware/articles/27727.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Media Player... Whenever I try to play a video, I get only audio but no video

  Whenever I try to play a video, I get only audio but no video

  Can someone help me

  Hi Pedro Gonzalez h,.

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the accurate and complete error message you get when you try to run?
  2 did you do any change to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2
  I suggest you try the steps from the following link:

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11
  http://support.Microsoft.com/kb/926373

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• Get only audio in Windows Media Player 11, when opening an AVI video clip

  Someone sent me a video clip titled AVI.  When I try to open it with Windows Media Player all I get is audio. I also tried to try to open it with Quicktime and nothing happened.  Any ideas?

  The following free utility to identify the codec you
  to read the file.

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Codec identifier
  http://www.headbands.com/GSpot/download.html

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Or you can download and install the freeware VLC
  Media Player that will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.