Meaning of inverse cursor buttons

Similar Questions

• Cursor button Lenovo Y570 GPU broke.

  The button that goes into the USB port, which transforms the on / off the GPU on my lenovo y570 broke. More acuratly little pin that goes between the cursor button, and the item itself on the motherboard broke.

  The only way to solve this problem is to buy a new USB port for my model, but I don't know where to find it. Could you please tell me the right direction to buy that part?

  Hi pelu_jose,

  Welcome to the Community Forums of Lenovo!

  Please check this manual for part numbers and the installation procedure

  Lenovo's Y470/Y570 Reference manual

  PANEL OF 10 USB 2.0 W/SWTICH (Y570) 11013467 PIQY1

  PANEL 10 IN USB 3.0 W/SWTICH (Y570) 11013468 PIQY1

  You must determine if you have a USB 2.0 or 3.0 and search online reference numbers

  I tried checking around USB 3.0 can be searched and bought here at Lenovo Spareparts

  One with USB 2.0, you can search online and buy from third party resellers

  Hope this helps

  See you soon!

• Custom cursor - button click event does not

  Hello

  I'm looking to use cursors with AS3.  I created a movie object I position using:

  function mouseMoved(event:MouseEvent) {}

  mousePointer.x = this.mouseX;

  mousePointer.y = this.mouseY;

  }

  and by calling the Mouse.hide)

  It works very well on what the custom cursor follows the mouse, but I'm having some trouble using the events with the cursor.  I have several events click on the several buttons.  Events do not trigger when you use the custom cursor.  In my ignorance, I guess the problem is that the custom cursor movieclip is on the top of the key, and then click events are generated only for her and not the button.

  Is there a way to get around this?  And is it usually possible to ignore the events of a clip for a clip that is below?

  Kind regards

  Robbie your

  Try:

  mousePoiner.mouseEnabled = mousePointer.mouseChildren = false;

• stop the cursor buttons movie clip

  I animated movie clips as buttons. When she reaches the point where the cursor is on the button, it disappears. Here is the script that I have on the main timeline:
  
  news_mc is the instance name of my movie clip button
  
  news_mc.addEventListener (MouseEvent.CLICK, news page);
  news_mc.addEventListener (MouseEvent.MOUSE_OVER, newsRollOn);
  news_mc.addEventListener (MouseEvent.MOUSE_OUT, newsRollOff);
  news_mc.buttonMode = true;
  function newsRollOn(event:MouseEvent):void {}
  news_mc.gotoAndPlay ("in");
  }
  
  function newsRollOff(event:MouseEvent):void {}
  news_mc.gotoAndPlay ("out");
  }
  
  function newsPage(event:MouseEvent):void {}
  gotoAndStop ("news");
  
  I know that there is something on
  news_mc. Mask =? I don't know if I have, of course, what part of the mask that I use. I have a layer that contains the background of the button (the name of the instance - background) then the 2 layers that form the animated mask - the layer mask contains a copy of the background of the button (instance name - context.2) and then the animation later mask contains a gradient which slides on the button (instance name - Masker).
  
  What is going on?

  ROLL_OVER and ROLL_OUT rather than mouse_over and _out did the trick!

• If no data for required means.stop the cursor here itself

  Hi experts jdev,.
  
  am on jdev 11.1.1.5.0 - adfbc - db10g oracle - mozilla ff 9.0.1
  
  my need is:
  
  simple,
  
  If a field is required
  
  that field has no way of data
  do not move the cursor to the next field (inputextbox).
  
  fields has a few datas
  move to the next (inputtextbox) fields.
  
  
  by default provides adf
  small alert message for required it's ok.
  
  my need is: If the field is required. but there is no data. does not allow the user final cursor jumps to the next field.
  
  I hope you all understud.

  Take a look at this demo:

  
    
     
     
    
    
        function makeActive(event){
        if (event.getSource().getSubmittedValue() == '')
        event.getSource().focus();
       }
    
       
        
         
        
        
       
      
     
      
  

• Globes eye button

  Hi all

  Who went to the week OR and watched the fastest Championship developer LabVIEW knows exactly what I mean when I say button of eyeballs.  The task was to create a VI that had two buttons indicator.  These buttons were supposed to represent eyballs.  Their purpose, appear as if they follow the movement of the mouse cursor.  So when the mouse went, the buttons were to appear as if they were watching and monitoring that's every move.  The two developers have approached this exactly the same way (which is probably really the only way) where they have created a structure of the event and the event was the movement of the mouse.  From there on, the structure of the event passes the values both vertical and horizontal.  However, the winner (sorry man, I forgot your name so I'll call you the person) only provided horizontal buttons and when asked display, of course, he only moved his form of mouse from left to right.  Thus, the buttons have indeed followed the mouse, but only from left to right.  But the buttons can do it for a small amount of accuracy before they are no longer "Watch the cursor."  Say you move your mouse to the edge of the screen where the value is 0, the buttons "will attempt to down."   in any case, I've been putting far too much thought into that and I thought that I would allow the taking of community LabVIEW, stabbed it.  I say props to the winner, but the other guy (person B) seeks to integrate the coordinates x and y in its buttons and may have been unfairly beaten (person B ended up winning all this in any way, so w/e).  Can you make buttons of 360 degrees?  Anyone got a much better and much more accurate way to do this?

  I have advanced and completed the whole thing.  Two eyes that follow the cursor and a mouth to stop him.

• button video slider

  I need the code to activate the buttons for a video. I also have the scroll bar and the active button. However, the cursor button does not progress automatically while the video plays, but I can use the button to manually position the video. How can I get the button advance automatically.
  
  Thanks here is the code I am using
  
  on mouseDown
  -Which means that the constraint of cursor
  -the user drags is located below the button
  knobChan = the clickOn
  sliderChan = the clickOn - 1
  -assuming that the video sprite is sprite 1
  vidChan = 43
  left = sprite (sliderChan) .the
  right .right sprite (sliderChan) =
  range = right - left
  offset = mouseH - sprite (knobChan) .locH
  hard = sprite (vidChan).member.duration
  factor = float (hard) / range
  Sprite (vidChan) .movieRate = 0
  Repeat everything in the stillDown
  If (the mouseH > left) AND (the mouseH < right) then
  Sprite (knobChan) .locH = the mouseH
  updateStage
  Sprite (vidChan) .movieTime = (the mouseH - left) * factor
  end if
  end repeat
  -sprite (vidChan) .movieRate = 1
  end mouseDown

  Have you looked at the library? Code library... Media...
  QuickTime... QuickTime Control slider

  --
  Rob
  _______
  Rob Dillon
  Adobe Community Expert
  http://www.DDG-designs.com
  412-243-9119.

  http://www.Macromedia.com/software/trial/

• Cursor in the wrong place in 29 FF, misses ringlets, empty bar at the top of the page.

  After upgrade to FF29, I have an empty bar at the top of the window. This comes and will skip the page from top to bottom.

  When present, it moves the page in any 5 to 10 pixels. This means that the cursor is positioned wrong. For small controls as options, your click missing.

  Windows 7, vertical screen.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You must close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  In the Firefox Safe mode, these changes are effective:

  • all extensions are disabled (subject: addons)
  • Default theme is used (no persona)
  • userChrome.css and userContent.css are ignored (chrome folder)
  • default toolbars is used (localstore file - safe.rdf)
  • JIT JavaScript compilers are disabled (prefs: javascript.options. * jit)
  • hardware acceleration is turned off (Options > Advanced Options > general)
  • plugins are not affected
  • preferences are not affected

• Why no Firefox button at the top of the page to access the modules Firefox?

  The instructions to get modules said click Firefox at the top of a page of Firefox. The extreme upper-left icon of Firefox globe (I guess than the Firefox button) just gives me options narrow, reduce or restore. Anything else I can think of to follow the instruction works. I also have trouble getting a Menu button to the far right of the address next to the Home button bar. I have the latest version of Firefox.

  Hi jimfrancis, the Firefox logo is not the Firefox button, but you should be able to get the Firefox button by right-clicking in an empty space in one of the bars at the top of the browser by clicking on "Menu Bar". The Firefox button is not essential, however, File, Edit, View... menus provide the same functionality (but some help articles can only give instructions on the Firefox button).

  I'm not sure what you mean by a menu button, but you can add/remove buttons and move them by clicking right in an empty space in one of the bars at the top of the browser and select "Customize". You can then drag and drop icons/buttons in the window that is displayed in the bar at the top of the browser to add. You can also rearrange the buttons by drag-and - drop the verses of other places on the best bars and you can remove the buttons by dragging them from one of the best bars in the "Customize toolbars" window

• HP - 15-ay062nl: paved touch button question

  Hello.

  I have a problem with my new laptop HP - 15-ay062nl, running Windows 10 Version 1511.

  The left touchpad button has a strange reaction to pressure, which leads to hard daily use.

  When you press on normally (I mean: like any other button of touchpad, including the right of the laptop even button) it does not work, it works when a small extra-pression is given. The right button works normally instead.

  I'm afraid of damaging by pressing too hard several times under normal usage conditions.

  I think it's a hardware problem (maybe a Touch/cover mounting problem), as I tried to invert function buttons setting without change on its pressure sensitivity. I have not found a way of setting sensitivity of the button.

  Did anyone experience the same problem?

  Thank you.

  @Roberto8, thanks for the reply.

  As you mentioned that you updated all the drivers and the problem persists.

  It is good to know that you have sent the laptop at home.

  I'll watch for your reply.

  Nice day! See you soon!

• Re: Satellite A300 controls buttons do not work

  Command buttons on my new Satellite A300 for volume ect. have stopped responding to my touch. They are only half lit as they are caught between fading and. They used to work, but now they do not have. I reinstalled the package Toshiba value added but that doesn't seem to work.

  Soon, Levi,.

  Hello

  You mean all Toshiba control buttons (IE pause, play, stop, lighting, etc.) don t work yet, you have installed the new VAP?

  One of my friends had the similar problem and he has reinstalled the VFR too.
  Unfortunately, it has not been helping :(
  Something was confusing upward.

  He used the recovery disc and then everything worked again

  I don't know why this happened, but maybe it has something to do with MS updates

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Stop button is not active

  Hello
  When I run my program a can on the stop button, but after choosing N1 in the menu button is not active. How do active?
  Thank you

  It's one of the reasons why you do not "long" inside the event tasks.  What you really need is a state machine.

  But what is happening is that your case of event is set on "Lock panel until that case end of event.  This means that all the buttons are disabled until the end of this case for the event.  It is not complete until this loop ends, that will never happen since it is based on a button that has been locked.

• How to activate the rotation on the Windows Photo Viewer buttons?

  Original title: Rotation buttons

  How to activate the rotation on the Windows Photo Viewer buttons?

  Do you mean that the spin button is disable as if gray/disappear?

• color picker - cursor problem

  There is something weird with my preview of color picker in PS. It is the preview of the spectrum without gray spectrum.

  Please, look at the picture and you will see what I mean. The cursor is not the entire spectrum, but he should have.

  How can I return it? Thank you for helping me to solve this problem.

  

  Try checking the 'H' key in the HSB values section part.