MediaPlayBack download progress and connection speed

Similar Questions

• Unable to restore my iphone, it says download software and it took a long time then "cannot download software.

  I have a problem with that, first of all I can't activate my ipad and now my phone is disable bc of my friend, I downloaded itunes and connect my phone, it says software download but it took so longgg, idk if the internet was slow idk, so I waited then when things are going at the end of download it says "cannot download the software" tf? going onnn? haven't slept just to wait for it. PLEASE HELP PLEASE

  Take a look at this article, it should help you Get help with the Live - Support Apple iOS updates

• Loading slow web page and with Airport Extreme connection speeds

  About 5 days ago, I noticed a significant slow down the loading of web pages. In some cases, I see a blank white screen for up to a minute before the page is loaded. In others, the page never loads at all. And sometimes they load very quickly as expected. This happens with my iMac that is connected to a router via ethernet, as well as my Macbook Air connected via Wifi to Airport Extreme.

  I have a high-speed internet connection by cable Comcast/Xfinity: Blast 250Mbps.

  I tried to connect my iMac directly on the model of cable (Arris Surfboard SB6183), and there is no problem. Download speed was 30Mbps 300Mbps and upload.

  Then, I plugged my Airport Extreme router again and connected the iMac to the router via Ethernet. Download speed dropped to 100 Mbps!

  This suggests that the problem may be with the Airport Express. It is not a wireless problem, because as you can see the download speed went from 300Mbp/s connected directly to the model 100 Mbps when connected to the Airport Extreme.

  How do I troubleshoot/fix this?

  One last thing: I did a speed test with my Macbook Air that is connected via Wifi and the Airport Extreme router. Download speed dropped to 35 MB/s.

  Direct connection to the modem is so very fast, suggesting the internet connection Comcast isn't the issue. Speed falls even with ethernet to the Airport Extreme router connection, then decreases even more with the Wifi connection.

• trying to connect my Pantech P9050 phone on computer to download images and it keeps failing

  trying to connect my Pantech P9050 phone on computer to download images and it keeps failing suggestions?

  Hello

  1. what operating system is installed on your computer?

  2. it linked earlier? If so, remember you have changed your computer?

  3. you receive an error message?

  4. what exactly happens when you connect your phone?

  Provide more information to solve problems. Refer to this article How to ask the question: http://support.microsoft.com/kb/555375

  You can also post your questions in the forum of Pantech: http://forums.att.com/t5/Pantech/bd-p/Pantech

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• BEFSR41 and reduced connection speed

  I got cable high speed last week, and with it connected directly to my PC, I got amazing 28-33 Mbps connection speeds.

  So I plugged the router today to coonect mine and my wife (via Cat5) PC to cable and now I get only about 5 Mbit/s.

  The router choking off the coast of flow? Do I need a different model that can handle the speed?

  What the BEFSR41 version do you have?

  This problem of slowness "WAN to LAN speed" has been reported with version 1 and version 2.  Version 2 seems to be limited to about 7 Mbps.   Version 1 is slower.

• Connection speed 2.4 Ghz E3000 and USB HDD

  I use WRT160N for my internet and wifi at home. For the storage of the laptop, I use Seagete Free Agent 2 TB USB 3.0, which is nice by car.

  So I desided to buy E3000 and use as storage server, router, internet and wifi.

  I install everything, he went peaty smoot.

  During installation, I noticed that 2.4 GHz wifi shows only max 150 Mbps, but 5 GHz 300 Mbps connection speed (I use wifi mini card dell 1510 on my Dell laption, supports the 2.4 and 5 GHz).

  I tried different things to the 2.4 GHz to display connection 300Mbps speed (disable 5 GHz option, set the mode to "N" only, always use WPA2, etc.), but without success. When I connect to the old WRT160N, I can see 300Mbps speed of connection.

  Can you advice what settings should I set up, so that I can use connection to the E3000 300Mbps?

  The second bit I want to share and comment on is the access speed to the reader of the UBS.

  When I connect to the reader directly on my laptop, I am limited to 32 MB/s (256Mbps) read/write speed (the laptop is USB2.0, so it seems normal).

  Now, when I write of the E3000 max speed wifi I do is about 3 to 3.5 MB/s (24-28Mbps) and when it is connected to the local network (100 Mbps) speed is about 4 - 4. 5 MB/s (32-36 Mbps).

  It seems slow, peaty compared to the speed of the USB. 5 GHz wifi rate shows 300Mbps connection 144Mbps speed/2.4 Ghz (which is 18 MB/s), so that the router should be able to keep read/write rate highter.

  Is this a problem E3000 or this is the max I can get material in there?

  1. it's a router not a storage attached to the network power house. If you want a NAS with high performance get a NAS. The USB HDD is more for practical reasons, then for high performance. Drive speeds you see through the router are good enough for a device like this. Check what CPU you have in your E3000 and which processors they use in NAS devices that are able to provide data of 250 Mbit/s from a connected USB device and you will see that it is a completely different League...

  2. the 150 Mbps is a rate of 20 MHz. The connection uses only a band of 20 MHz and not a 40 Mhz. This is usually due to one of these two reasons:

  a. many pilots (for example Intel Centrinos) wireless equipped with 20 MHz preconfigured on the band 2.4 GHz. It will link ever more quick then 150 Mbps, unless you change the configuration of the driver.

  b. most / all new routers observe interference of signal on the tapes and automatically returns to 20 MHz mode, if they find too much interference. If you have many other access points in your proximity 40 MHz would mean more than twice the interference on the connection. Any other communication on stuck on 40 MHz channels would interfere with your communication. With a lot of traffic interfering on the range 2.4 GHz, you would see very low real rates if you forced 40 MHz in this case.

  And your neighbors using 802.11 g wouldn't really appreciate your bandwidth hogging. Because of the limited number of channels without overlapping on the 2.4 GHz band a router running on 40 MHz basically use 2/3 of the total available on the entire 2.4 GHz band available bandwidth. The execution of 40 MHz in a neighborhood with many other access points is all just a terrible idea...

• I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  Hello

  Please try the suggestions in the link below one by one and I'm sure that you will be able to solve the problem.

  I can't Adobe Business Catalyst. When I publish my site to my testing with Adobe Business Catalyst site, I get a message that I was out. What is going on?

  Kind regards

  Vivek

• I joined CC and downloaded LR and PS according to the instructions connected to my adobe account. But it has downloaded a trial expired a 29 day trial of the PS and LR. What have a done?

  I joined CC and downloaded LR and PS according to the instructions connected to my adobe account. But it has downloaded a trial expired a 29 day trial of the PS and LR. What have a done?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely. What can I do? Thank you

  Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely, even on VERY small 72 dpi images. What can I do? Thank you!

  Double check all settings in the crop tool and make sure that you are not say things to create an image of HUGE due to your settings.

• Once connected to download the message 'download error' and application of re - download the creative cloud

  Hello. I did the installation of Adobe Criative cloud. Once logged in to download the application the message 'download error' and application of re - download the creative cloud (and I am downloading repeatedly unresolved. "What should I do?

  Hello

  Please see: -.

  Error download or update Adobe Creative Cloud applications

  or

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

  Hope this helps!

• iPadAir 2 download progress

  Anyway is to monitor the progress of a download on an iPad 2 Air?   My new iPad is in constant "backup restore" for more than two weeks, since I initiated it.   Run app speedtest shows that the connection speed is 25Mbps and superior, so speed is not the issue.

  My download could be stuck in a loop or something?  solutions if yes?

  Thank you...

  The food is absolutely stuck. There is no way that take more than a few hours or a full day at the most, but two weeks is perhaps out of the question. I think that it is the path to stop it. Go to settings > iCloud > backup > stop the restore from backup.

  There is reason why the restoration takes so long and something maybe corrupt in the backup. If it continues to stall, try using another backup if you have one.

• JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

  I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

  Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

• HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

  I have seen this problem posted a few more times, it seems that it is recurring.

  I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

  The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

• Vs direct wireless connection speed.

  I have been using a WRT610N router for several years.  A couple of weeks, I bought an iPad 2.  I don't know if this is a limitaion to the iPad 2 or a problem of connection speed wireless, but when you watch the video You Tube music videos often stops and I have to press the play button to resume.  This happens more often if I use a headset Blue Tooth connected connected headphones direct, leading me to the initial conclusion that I see the limits of the processor in the iPad 2.  However, I recently downloaded the application of www.speedtest.net speed Test and found that the wireless download speed varies from topic 11-15Mbps, depending on (normal vs. next to the router).  If I go on this web site and run the speed test of my PC connected directly (connected to 1 Gbps), I tend to 36 Mbps download speed (swollen I know because Comcast so-called speed is limited to 25 Mbps).

  Opinions?

  Let me clarify my speed with Comcast.  I currently have "Blast".  "Blast" currently has a limitation of maximum download speed 25 Mbit/s, excluding the "Power boost".  The limit is imposed by the startup file that has been uploaded to the D3 modem provided by Comcast.  I expect the download speed connected direct to be connected wireless speed, not just much lower.

  I think that the download speed is not the problem.  I have convinced myself now that the real problem is the limits of treatment of the iPad 2. This is based on the fact that when I came to you Tube this AM of the Wi - Fi in a local mall today, the download speed is only about 1 Mbps, but I saw no significant difference in the performance of video playback on my connection from 11 to 15 Mbps at home.