meet the demand of the system will not play audio through the modem to the phone line.

Similar Questions

• HP Pavilion dv7 will not play audio via HDMI

  Hi I noticed recently that my laptop Pavilion dv7 entertainment will not play sound through the TV. The image is on the tv but its is running through the speakers of the laptop? I never had a problem with it until now. When I open the sound options, the ATI HDMI says it is not connected and it won't let me select it so it is connected? Help, please?

  Best regards, Sez.

  Sez Hi,

  Try to use Recovery Manager to reinstall your graphics driver AMD package as this will also reinstall the driver Audio HDMI AMD - how to use the Recovery Manager to reinstall the software and drivers is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Why my system will not play "Avatar", the movie, and why he won't play a. MOV movie file smoothly?

  I don't know enough to provide more details.  I have a Canon camera, with all included software installed and a film I made that displays just fine on the camera and television, downloaded but will not play smoothly around a bit.  Brand new with Windows 7 computer.  It is what appears on the screen:

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

  In fact I don't think I have a se video card.  I got 500GB of memory, 2, 4 GB of RAM, with a 3.6 GHZ processor.

  Thank you.

  Giaour

  Hi Giaour,

  Which version of QuickTime is installed on your computer?

  Apple Computer developed the QuickTime file format to create, edit, publish, and view multimedia files. QuickTime format can contain video, animation, graphics, 3D and virtual reality (VR) content. Only QuickTime files version 2.0 or earlier can be played in Windows Media Player. Later versions of QuickTime require the Apple QuickTime Player owner. For more information, visit the following Apple Web site:

  http://www.Apple.com/QuickTime

  More information refer to the following Microsoft article.

  Information on the types of media files that supports Windows Media Player

  Try the following and see if it helps.

  Method 1:

  I suggest to run the Windows Media Player settings Troubleshooter and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  This problem may occur if the resolution requested by the application is not possible by two display devices. Typically, this means that the application can request a resolution interlaced, but one of the two screens is unable to support the required screen resolution.

  Refer to the steps in the following Microsoft article.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  Keep us updated on the status of the issue.

  I'm having fun not fast! I'm a fool. I downloaded an upgrade to 7.7.4 (I think) and it solved the problem of home videos. I still have to start the DVD player. Thank you much for the help. Giaour

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Will not, play audio or video

  9.2.0 (41) first Pro CC is no longer will play video or audio in the line of time or the trace source. Hit the SPACEBAR, J K L, or by clicking on the Play-Stop-Toggle make no difference. The blue bar does not move along the time line and nothing plays. The Play-Stop-Toggle varies from a triangle instead - but that's all. It also does not matter if I create a new project or the sequence or open an existing one. Export Media still works OK and the exported media play OK.

  I tried to uninstall and reinstall Premier Pro.

  I tried to roll back to a restore point Windows - that worked once, but not the second time or subsequent.

  As a matter of interest, hearing CC and after effects CC properly.

  I'm on Windows 10 on an Intel Core i7 - 3930K 3.20 GHz with 16 GB of RAM. I did the changes on the hardware more than a year.

  While I had problems with leaking memory with earlier versions of the Premier Pro I have not experienced this refusal to issue before playing. The problem happened without apparent reason, about two weeks ago. First Pro was working fine before this.

  I would welcome suggestions.

  The problem has been fixed with the help of Adobe support online chat.

  The measures taken were:

  Close the Premier Pro.

  Rename the file C:\Users\xxxx\AppData\Roaming\Adobe\Premier Pro to something else e.g. first former Pro

  Rename the file C:\Users\xxxPro \Documents\Adobe\Premiere to something else e.g. first former Pro

  Open Pro Prime Minister and he must create new versions of the two files above.

• Accordion, Interaction of training will not play Audio

  I have Adobe Captivate 9.0.2.421 on a Mac computer. I create a training with audio accordion Interaction in each of the four drop downs. However, when I saw, the sound does not play when you click on a drop down.

  It is possible that I found them here: Adobe Captivate 9--> Gallery---> Interactions.  (see screenshot).

  

  In any case, I found the solution to my problem in another forum post from Rick "Captiv8r:

  

• Why the IPAD will not play audio

  Suddenly the woman IPAD won't play no audio received via e-mail (daily audio seminars) or video clips on Facebook. Was working until yesterday. The IPAD is just "bogus" some time for the video, then says: "cannot play the video. For audio, the 'bar' with the length of time ppears, but shows no time about it, just "00:00". "." Has she lost an app needed to play such things. She says she has the MP3 player audio RPF necessary.

  Have him try a force restart: press and hold the home button and sleep, wait for the Apple logo, release the buttons.

• Movies transferred to Mac will not play audio

  I have some videos from my laptop that I saved on my desktop Mac. They had audio on the laptop but now I noticed there is no option for sound on the Mac, but the videos play without a hitch. Now this is not a huge problem except that my laptop recently crashed and I can no longer log in and access my files. Then these videos are, roughly speaking, no longer needed. Is there any application or any situation to extract audio lost for my videos?

  Is there any application or any situation to extract audio lost for my videos?

  If the problem is a lack of support from the audio codec on Mac, then try the VLC Player for free.

  

• Window Movie Maker will import my .mpg file, but will not play audio.

  I used Windows Movie Maker 2.6, Vista and Live for many years and I've always been able to convert my files to .wmv with ease. My old computer recently crashed and I reinstalled the program and codec I had on my new machine.

  A week ago, I was import and conversion of some files to .mpg without problem what-so-ever, but when I import my .mpg files now, I receive one of the following scenarios:
  (1) ".mpg is an empty file." (2.6)
  (2) the video works fine, but there is no audio data. Yet, if I play in Windows Media Player or any other program, I get the audio without problem. (Vista and Live)
  (3) I also run Magix Movie Edit Pro 15, but when it exports to .wmv, the video is distorted / restless (even with the anti-flicker filter on).

  I have uninstalled and reinstalled my codecs several times, went to the compatibility of the Menus and tried to post the video to see if the audio could have a defect in playback of the program, but without success.

  Hello

  I suggest you to post your query on Windows/entertainment and Connected Home forum on the issue.

  Windows/entertainment and connected home

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

• First Pro CC will not play audio video file

  I tried to edit videos recorded with Bandicam in first Pro CC. The video file itself is fine, when I play it in Windows Media Player all withdrew, but once that I get it into a sequence in first Pro CC despite it showing the audio track and turning the volume to maximum, there is no sound! How to pick up the audio I know is there?

  Bandicam read #10 http://forums.adobe.com/thread/954394 for possible hellp

• Audio of the video will not play on Mobile (unless there are headphones)

  Hi all

  I had a customer bring a problem I've never seen before me. They have a video that will not play audio on all mobile devices unless earphones are connected. Digging around, it seems that the problem comes from the original item, but I still wonder why audio will not play and if there is anything I can do (any codec I use) which will fix the problem. I played around using the options both AAC or MPEG, mono/stereo, played with sampling frequency and bitrate but nothing seems to have no effect on her.

  Any thoughts?

  Thank you!

  Take a look at this:

  Re: Audio problem on smartphone

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Media Player will not play mp4 or mpeg1 files. When I try the system crashes and it goes to the blue screen of death

  I'm running a quad core with 8 GB of windows 7 with office 2013 RAM.  All are clean installs.  When I try to play a video file on Media player my system breaks down and made a memory dump.  This also happens when I try and put a video in PowerPoint.  I am able to play these videos on QuickTime on the same machine.  The videos play fine on another machine of Windows 7 office 2013.  We use this system for presentations churches.

  Can anyone help?

  Hello

  1. Do you have an error message when you play this video?
  2. What Media Player do you use?
  3. Did you recent hardware or changes to the software to the computer before the show?

  I suggest using Windows Media Player, then try the following steps. This problem may occur because of codecs. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  You can refer to the suggestion made by Rohit Chettri in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Player-will-not-play-MPG-files/16145802-7e2b-4BD0-a81f-c58c54588d26

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.