MEM.swapused.Average find virtual vm use the pagefile and decrease the perf of storage

Similar Questions

• Could not find ' subject: accidents using the address bar

  My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
  Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

  I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
  I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

  Hello type about: crashes without an empty space (on: crashes)

  Thank you

• I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

  I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

  option of command, escape on the keyboard and then on the force quit button for all applications listed

  then empty the trash

• How to install an operating system on a virtual machine using the ISO file?

  Hello

  I use vmware workstation version 6. I have different kinds of opersting systems likeFedora, Ubuntu, Windows xp CD to install on my virtual machines using the CD-ROM drive.  . I want to know is possible to install a virtual machine via an ISO file?

  Thank you

  mypass

  Yes

  Click on "Menu" > "new" > "virtual machine".

  Click on "Customize."

  Select "next".

  Select "install-disk (iso)".

  Click 'Browse '.

  the rest is explained

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Update of the virtual hardware using the SDK?

  We are converting 2.5 VC to vSphere 4.0, and I'm curious to know if it is possible to automate the process of updating the hardware virtual of our VMS version 4 to version 7, so that we can start using them in an environment vSphere with all the bells and whistles. To be clear, I'm trying to know if there is a way to use the Perl API to duplicate the results I would get by right-clicking on a virtual machine in the VC and selecting "Update of virtual hardware".

  Yep, you'll need to get a reference to an offline VM and then call the UpgradeVM_Task method and specify the version, and in this case it will be 7

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• virtual access using the web browser

  can I access virtual machine that installed on esxi using the web browser (Internet explorer)

  Hello

  You can access the console of the Web Client vSphere.

  lamw wrote a nice script to generate direct links to consoles, if you want to distribute to other people who are not so familiar with the web client:

  http://www.virtuallyghetto.com/2011/10/how-to-generate-VM-remote-console-URL.html

  He also wrote another script to generate previously authenticated links:

  http://www.virtuallyghetto.com/2013/09/how-to-generate-pre-authenticated-HTML5.html

• Create a virtual machine using the ubuntu (host of W7) partition

  I am running Windows 7 and 8 of VMware Workstation.

  The disc is actually a raid-0. There are 3 partitions: (Dual-boot)

  -Ubuntu (64-bit)

  -System reserved Windows

  -Windows (64-bit)

  I am trying to create a virtual machine under W7 using the Ubuntu partition.

  I tried 2 things for step 'select a physical drive:

  -Use individual partitions. The problem is at the end, when you click Finish. I get the error: "one of the provided parameters is not valid."

  -Disc use whole. The virtual machine is created, but when I turned on, I get the error:

  "Could not open the disk ' C:\. [..] \Ubuntu 64 - bit.vmdk' or one of the snapshot disks it depends on.

  Reason: the physical disk is already in use. »

  Thank you in advance for answering,

  Kind regards.

  In my tests I couldn't use a host physical diskwith a Windows 7 without setting the disc 'offline '.
  But then you can set the diskette from Windows Startup 'offline '.

  Using Linux or 2003, you don't have this problem.

• Using allPageItems to find a textFrame using the label gives error

  Hello all the
  
  Using allPageItems to find un textFrame using label gives error.
  
  Example of :
  J’ai un text framework with label " "myTest""
  The problem only le textFrame peut be in un Group of objects or not . So Je have to Search using allPageItems .

  1. I write, but gives the error:

  var myDocument = app.activeDocument;
  var myTextFrame = myDocument.allPageItems.item("myTest");
  myTextFrame.contents = "Test OK!";
  alert("OK!");
  
  

  2 in writing in this way I can succeed, but can take more time because they may not know how the items in the document:

  var myDocument = app.activeDocument;
  var myTextFrame;
  for(var i = 0; i < myDocument.allPageItems.length; i++){
      if (myDocument.allPageItems[i].constructor.name == "TextFrame"){
          if (myDocument.allPageItems[i].label == "myTest"){
              var myTextFrame = myDocument.allPageItems[i];
              myTextFrame.contents = "Test OK!";
              alert("OK!");
              break;
              }
          }
      }
  

  There is another way that a more direct and faster to find the TextFrame?

  I'm on CS4, but I can work with CS5, CS5.5 or if it's better.

  Thank you

  Elvis

  Hi Elvis,.

  You can try this js code:

  Because if you want to remove the empty textframe I use this way.

  myDoc var = app.activeDocument;
  var myPg = myDoc.allPageItems;

  for (i = 0; i
  var myFrame = myPg [i];
  If (instanceof TextFrame myFrame) {}
  If (myFrame.label == "myTest") {}
  myFrame.contents = 'Test OK!';
  }
  }
  }
  Alert ("Done!");

  THX

  csm_phil

• How to find a table, using the name of the column in the database schema

  Dear all,
  
  Please help me on
  
  using the name of the column, how to find a table name in the database schema.
  
  Thanks in advance

  Hello

  You can query the data dictionary views all_tab_columns and user_tab_columns.
  For example, to find the tables in the scott schema have called deptno columns:

  SELECT  table_name
  FROM    all_tab_columns
  WHERE   owner           = 'SCOTT'
  AND     column_name     = 'DEPTNO';
  

  Remember that anything inside quotes is case-sensitive.

  The all_tab_columns view has one row for each column in each table (or view) that you have the privileges to use.
  The user_tab_columns view is a subset of all_tab_columns, containing only your own tables (and views).

• using the WSSD as storage additional 15-j171nr

  2 related questions:

  1. I replaced my HDD with a SSD. I need is no longer the WSSD as a cache acceleration. The WSSD can be reformatted to be used as an additional 2 of 24 GB for storage hard disk?

  2. If the answer to the first question is in the affirmative, can I switch to 16 GB of ram without problem? I have read reports in this forum where people have had problems with the help of more than 8 GB of ram with the WSSD. but since it is no longer a cache for the HARD drive and just storage it should be ok right?

  Yes and Yes. The WSSD is displayed in the disk management console? It appears in 'computer '?

  See Page 43 of the Service Manual for the location of the WSSD:

  Manual

  Open the console Intel Rapid Storage of Windows and see how the MSSD appears here, if so.

  I have a 17 envy which I think is essentially the same hardware you have. In order to "unmask" the drive of the WSSD 24 concert and make it available to Windows to format and mount as a lettered drive, I have to go into the BIOS F10 and disable "secure starting" and enable legacy start. Then at the start, you are greeted with the BIOS level configuration tool RAID Intel. You have defined the 24 concert on non-RAID drive, and then restart the secure boot and startup in Windows 8 and the drive of the WSSD should be visible in the disk management console to format and assign a drive letter.

  The limit of 16 gigabytes of RAM upgrade applies only if you use the WSSD as a disk cache acceleration. So feel free to add RAM even with the current configuration. 24 GB of storage is not much, so you might be better off to just remove the MSSD and set aside in case you want to use.

  Post back if you need help more with this.

• I plugged my phone into my computer. I tried to find it by using the viewfinder of the Bluetooth device, but it does not work?

  Discoverable is turned on, the battery is fully charged... I even plugged it with a universal charger cable. Nothing happens.

  Help, please.

  (PS, I did all the steps with the pre-made steps of troubleshooting help. Still can't find my phone. It's a Samsung Stide or fight, I'm not sure)

  Contact the manufacturer of the phone or visit their web page (and know what phone you have) and see what the support that they have.  Any material support for any device comes from the manufacturer of the device - any operating system, you decide to use.

• How can I find a picture using the file identification number?

  I seems to have chosen a picture that I like but that you have not downloaded the preview to my computer. I wrote only the number of the file down. How can I find this image now? To explain in more detail, when you download the preview each photo has a number at the bottom right, normally about 8 digits. I want to use this number to locate a picture.

  Thank you for your help.

  Simply type the number of the image in the search. Be sure that the correct file types are audited.

• Someone at - it a simple example of creating virtual machine-> the affinities of virtual machine using the PERL API?

  The question just about everything said. Is there a perl extracts to create an affinity between the virtual machines.

  Thanks, Vikas, for example and guidance. Since I am abel to make it work, I thought I'd share the code example:

  My $vm_name_list;    # A list of names of virtual machine.

  My @vm_morefs;      # Filled in the managed object refes to the virtual machines, this detail not included.

  My $cluster_name;    # Name of the cluster to create the rule in

  # Find the Cluster Compute resource object.

  My $cluster_views = Vim::find_entity_views (view_type-online 'ClusterComputeResource',
  filter-online {name-online $cluster_name});
  If (! @$cluster_views) {}
  Die "no cluster don't compute resource named $cluster_name detecte\n";
  }

  My $cluster_view = $cluster_views-> [0];

  My $rule_name = 'affinity for $vm_name_list. "

  # Create the nest of objects required for ReconfigureCluster_Task:
  #
  # ClusterConfigSpec
  rulesSpec #-> [ClusterRuleSpec]
  operation #-> ArrayUpdateInformation
  # enum (add, modify, delete)
  Info #-> ClusterAffinityRuleSpec

  My $aff_rule_spec = new ClusterAffinityRuleSpec (name => $rule_name,)
  enabled-online "TRUE."
  mandatory-online "TRUE."
  VM-online \@vm_morefs);

  My $array_update_operation = new ArrayUpdateOperation ("add");

  My $clus_rule_spec = new ClusterRuleSpec (operation => $array_update_operation, info-online $aff_rule_spec).

  My @clus_rule_specs;
  Push (@clus_rule_specs, $clus_rule_spec);

  My $cluster_config_spec = new ClusterConfigSpec (rulesSpec-online \@clus_rule_specs);
  $cluster_view-> ReconfigureCluster_Task (spec => $cluster_config_spec,)

  change-online 'TRUE'));

• Who is looking at my virtual machine using the VSphere Console at the same time?

  People,

  I would like to know if it is possible to know what VI Client / vSphere console user currently displays the Vmware console at the same time for a particular virtual machine I'm working on?
  Because right now, someone else is my VM console access and may have forgotten to close the VI Client and now I'm stuck.

  This is the error that I got when I try to connect to the console. Internal error MKS due to the 'RemoteDisplay.maxConnections with a value of 1"is in force.

  Thank you

  Hello, AlbertWT-

  Well, it seems that there is another way.  You can get the number of current connections of MKS (mouse keyboard screen) for the given virtual machine and uses this value to your Select statement.  Which must correspond with the users with current MKS connections to this virtual machine.

  So, what to put with what hosted proposed and you changed, it would be like:

  $strVMName = "myVM"## get VM; will use an ExtensionData value from this later$vm = Get-VM -Name $strVMName## get the events that are for console connects, sort, and then select the first X items, based on the number of current MKS connectionsGet-VIEvent $vm | ? {$_.FullFormattedMessage -like "Remote console Connected*"} | Sort CreatedTime -Descending | Select UserName, CreatedTime -First $vm.ExtensionData.Summary.Runtime.NumMksConnections | ft -AutoSize
  

  And, a variation on the last line, the one who checks the type of the VIEvent (vs do a string comparison):

  ## same, but check the event type instead of a string compare on the FullFormattedMessage (just to not rely on string compares)Get-VIEvent $vm | ? {$_ -is [VMware.Vim.VmRemoteConsoleConnectedEvent]} | Sort CreatedTime -Descending | Select UserName, CreatedTime -First $vm.ExtensionData.Summary.Runtime.NumMksConnections | ft -AutoSize
  

  The two should work, but the second version removes the dependency on the string comparison.  For example, if the FullFormattedMessage changes in the future implementations of vSphere, things should still work (However, this would be still vulnerable to break if VMware changed the name of the type of the event).  A bit of a preference thing.

  How does do for you?

  Note: by sorting on Createduserid, this process assumes that the current console connections have been made in the order.  In other words, if someone has been connected to the console of the virtual machine since yesterday and connect / disconnect / reconnect, _you_ will be the last two events Connect.

• Prevent the player from virtual machine using the VPN to the host machine

  Hello

  One of the reasons that I have installed VM Player with the app "Browser Appliance", was for navigation, I made within this virtual machine would be independent of VPN to my host computer.

  Steps: on the host machine, connect to the Cisco VPN 5000

  On the Virtual Machine try to access a url that wouldn't be avaialable so connected by VPN

  Expected: I am NOT able to access the private URL. If the virtual machine is hacked, the hacker will have access to a URL of the company.

  Note: I use device browser 1.0 with Ubuntu linux. the adapter network mode is NAT.

  Thank you for all the advice

  I assumed that any network (wifi or ethernet) usb-based adapter should allows you to have an isolated inside the guest network.

  Joakim