MemeoLauncher.exe - Common Language Runtime Debugging Services error
Error occur every time you start. Can not find a solution. I have a XP system with all patches installed. Thank you!
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353
NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
Tags: Windows
Similar Questions
-
I run a HP Scanjet 4890 scanner with my setup. I use the software partner HP (HP solutions Center documents Viewer) with my scanner.
I get a window called HPQTHB08.exe - Common Language Runtime Debugging Services, the Application has generated an exception that could not be treated, process ID = 0x6b0 (1712), thread ID = 0x6c0 (1728), click OK to close the application, click on CANCEL to debug the application.
What is c?
I tried to click on the two, and I get a message saying that a registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0 x 2 (2). Please check computer settings cordbg.exe! a 0x6b0.
I am curious to know which in HP cela and how can I get it resolved.
I uninstalled Photosmart first 6.5 as you say, then I looked in program files / HP / Digital Imaging / bin. The HPQTHB08 .exe file wasn't there. I rechecked and after determining and confirming that the hpqthb08 was not there, I tried the HP solution center software to see if my scanner worked. He did it, thank you.
-
Common Language Runtime Debugging Services
I get the fatal execution engine errors.
onfserv.exe - Common Language Runtime Debugging Services
McafeeDataBackup.exe - Common Language Runtime Debugging Services
MSI189. Temp - Common Language Runtime Debugging Services
MSIEF.temp - Common Language Runtime Debugging Services
What is the cause and how can I solve this problem.
It could be a virus, try to scan your computer with other antivirus software you have now installed. If this isn't the problem check the chipset drivers and all windows updates. Cheers and post back if none have worked!
Post edited by: daniel.micu
-
ehExtHost.exe Service error Common Language Runtime Debugging
At the opening of Media Center (2005, Windows XP) I get this error message.
ehExtHost.exe Service Common Language Runtime Debugging
Request a generetaed an exception that could not be treated.
(Process Id =) x 1648 (5704), Thread id =) x 490 (1168).
I click on the option not (not the debug option) and the message disappears, seams to work OK, but I always get this message when I open the Media Center.
Any help is appreciated.
Hi TrevorGeddis,
This can be caused by a corrupt installation of the .NET Framework. Follow the steps in the article to uninstall and reinstall.
Install the .NET Framework fails and requires manual removal
-
Language Runtime Debugging Services process ID current errors in Media Center
Separated from: http://social.answers.Microsoft.com/forums/en-us/mediacenter/thread/c6d65a01-000b-4abf-a0a9-40c1ade236cf
It did not help me, still the same problem.
Try this: -.
Start > run and type: cmd
in the command prompt window, type the following commands and press ENTER after each command of the: -.
Type: regsvr32.exe atl.dll
Type: cd.
Type: windows cd
Type: cd eHome
Type: ehSched /unregServer
Type: ehSched/service
Type: ehRecvr /unregServer
Type: ehRecvr/service
Type: ehRec.exe /unregServer
Type: ehRec.exe/regserver
Type: ehmsas.exe /unregServer
Type: ehmsas.exe/regserver
Restart the Media CenterS.Sengupta Media Center MVP
-
Just Sony Vegas Movie Studio 9.0. "I could download and register successfully, but whenever I try to open it, the yellow triangle with an exclamation point appears saying:" an error occurred from Vegas Movie Studio. An internal error happened in the Common Language Runtime to run engine. "So I click on details and it says failed to initialize script host. I don't know what that means. What can I do to make it work?
Too bad. I got out my computer and it is now successfully in collaboration.
-
To insert a text entry on the Common Language RunTime programmatically
Scenario is,
I want to add a text on my page programmatically. That is to say when I press the button or press on enter into a text input, it automatically inserts the Code below in the Page Source File (XML file)
< h:inputText id = "it6" style = "height: 15px;" Width: 40px; "/ >
This code is generated when we add the HTML page JSPX type input text.
How can I generate this code or insert text of entry program? Thanks in advance
You can create and add components to the page when running, but it is not part of the xml source jspx, it will appear on the page, and you can create binding and validator for this according to your requirement
Check this blog post -http://www.awasthiashish.com/2013/08/creating-dynamic-layout-form-and-ui.html
Hope this will help you
Ashish
-
Question of Media Center Qosmio G - ehshell.exe runtime debugging series
Hi fans of Qosmio
I have a problem with my Media Center.
When I try to view a video I downloaded the screen goes black and stay like that and when I CTRL ALT DEL off to get him a (ehshell.exe - common language runtime debugging) rises.First of all it says application has generated an exception that t couldn't be manipulated PID id = 0xc60 (3168) thread = 0x8c8 (2286).
It gives me options, click ok to complete or Cancel to debug.
When I click on Cancel to debug said registered JIT debugger is not available with 0 x 2 (2) check parameters cordbg.exe error code the 0xc60 happens.Hope someone can help me with this problem and I hope it's not technical.
I m not very good on this subject.TNK, Mike
> When I try to view a video I downloaded the screen goes black and stay like that
Does this happen only to play THIS video or downloaded video?
Did you check if you can play other video files correctly?I have goggled a bit, but unfortunately, there are not many cases about this error message.
I think that it s simply something wrong with certain files, registry keys or the operating system is simply confused upward. In this case and to be honest it s nothing unusual in the wide word of computer systemsFirst of all, you can try to clean the operating system using the CCLeaner. It cleans the OS files and the registry. In addition, it would be desirable to install all the patches and fixes available...
If that doesn't do it, it would be very interesting to know if the same error would appear on own pre-installed OS
So, as you see it s not easy to say why the error message displayed to certain procedures of investigations would be necessary
Good luck
-
version of runtime common language 4.0.30319.0.
Hello
You try to run the Dell Diagnostic module, but it asks that the Common Language Runtime from Microsoft version 4.0.30319.0. should be in place.
Cannot find all versions.
Thank you
Tom
PS I am unsure of the category Forum and the correct Windows topic, but the Windows version is correct.
Hi Tom,
According to the runtime error that you display, it's .NET 4.0 problem, make sure that the computer of the user/client have .net installed 4.0
Please install from the link:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851For more information:
http://msdn.Microsoft.com/en-us/library/ddk909ch (v = vs. 71) .aspxLet us know if you have other questions about Windows in the future.
-
Error Message hpqthb08.exe - CommonLanguageRuntime Debugging Services
I have a HP Pavilion AMD64 processor, Windows XP Home Edition 32 bit and use Firefox
At startup I get first this window
hpqthb08.exe CommongLanguageRuntime Debugging Services
Application generated exception cannot handle (paraphrased)
process ID = 0x5a0 (1440), thread id = 0x5ac (1452)
When I "click" Cancel in the window above, the following window appears
hpqthb08.exe - no debugger found
Registered debugger is not available, etc. (paraphrase)
Cordbg.exe! a 0 x 614
I can't get rid of these two windows that appear every time I turn on the computer and would appreciate advice please. Richard
A few weeks ago I was trying to download a "debugger" but does not succeed.
Here is some information on hpqthb08.e xe (I wouldn't pay for anything...).
http://www.bleepingcomputer.com/startups/hpqthb08.exe-10037.html
Here is some info that might help. Read the thread and you will find information in a green box that may be beneficial to you.
http://www.bleepingcomputer.com/forums/topic44309.html
Good luck with it!
GeorgeFN
-
Error message "" unable to save the MP Servic &#62; exe "to windows NT or Services"
Error message "" unable to save the MP Servic > exe "to windows NT or Services"
I get this message trying to install a Canon printer
Jim
A few quick questions for you:
- What printer model
- Have you tried uninstalling and reinstalling the printer
- You, the drivers are up-to-date
You can try and run the difficulty he tool and see if that solves your problem
-
When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exeI am using Microsoft Windows XP Home Edition Version 2002
Service Pack 3The program stops. It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.
When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exeI am using Microsoft Windows XP Home Edition Version 2002
Service Pack 3The program stops. It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.
========================================
Might be interesting to try to download and install the following scroll:Picture It! Publishing 2002:
Patch for 19299 (PI19299.exe)
http://tinyurl.com/dfeq28
or...
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0fb68178-d6bd-41BD-9f00-f44ac7ca9e28
John Inzer - MS - MVP - digital media experience -
On HP Laserjet 3000n 49.4C02 Service error
Our network printer met an over the weekend 49.4c02 service error. The error reads as follows:
49.4C02
The service error of
-------------
Unknown.c
Line = 0
-------------
[PID, TID]
[12.70]
------------
STLVL 0
SRVP.Sl a 0040, 108
------------
STLVL1
SRVP.SL 00409eb8
------------
STLVL2
SRVP.SL 00402f9c
------------
STLVL3
LJ.exe 004013e0
------------
STLVL4
SRVP.SL 00402ea0
-----------
STLVL5
SRVP.SL 00402d6e
----------
STLVL6
Manager called 2ffff000
------------
STLVL7
PageMaker.dll 004ebbe4
------------
STLVL8
PageMaker.dll 004e9124
------------
STLVL9
PageMaker.dll 004ecff8
------------
STLVL10
PageMaker.dll 004e9124
------------
STLVL11
PageMaker.dll 004ece4c
------------
STLVL12
PageMaker.dll 004e9124
------------
STLVL13
PageMaker.dll 004ece4c
------------
STLVL14
PageMaker.dll 004e9124
------------
STLVL15
PageMaker.dll 004ece4c
------------
STLVL16
PageMaker.dll 004e9124
------------
STLVL17
PageMaker.dll 004ece4c
------------
STLVL18
PageMaker.dll 004e9124
------------
STLVL19
PageMaker.dll 004ece4c
------------
STLVL20
PageMaker.dll 004e9124
------------
STLVL21
PageMaker.dll 004ece4c
---------
STLVL22
PageMaker.dll 004e9124
------------
STLVL23
PageMaker.dll 004e9314
------------
STLVL24
PageMaker.dll 004b6fa4
------------
STLVL25
PageMaker.dll 00500af0
------------
STLVL26
PageMaker.dll 004b73c0
------------
STLVL27
PageMaker.dll 004f8658
------------
STLVL28
PageMaker.dll 004a900c
---------
BATTERY END
I tried to disconnect the network diagnostics and printing to the printer and it worked well. Also, I swapped the ethernet cables and uses another port, but as soon as I plug the printer in I get this error and the printer hangs. I can ping the printer's IP, so it seems to be able to communicte with the network very well.
What should I do to fix this?
>... as soon as I plug the printer I get this error...
Do you mean:
- As soon as I plug the printer into a power outlet, or
- As soon as I plug in the printer on the network
If the latter, then it is very likely that something on your network sends a rogue/corrupt print job, which is severely malformed and causing the interpreter of language in the firmware to crash.
-
Media Center Receiver Service errors
I recently installed first Adobe Elements 8 and now constantly get media Center Receiver Service error messages.
Can anyone help? I have Windows XP (SP3) as my OS and IE as my internet browser.
Hi MilkySLC,
· What is the most complete and the exact error message that you receive?
· You receive an error with the error code?
1. check if the windows media center service is set to automatic
a. click on start
b. click on execution, ion run-in box type services.msc
c. search service in windows media center
Check if the following services are started, otherwise start it and set it to auto
a. steps to assign automatic services
b. Locate the service
c. right-click on the service
d. If the service is stopped and then starts the service
e. Select Properties
f. and in startup type, select automatic
2 run the checker system files on the computer. You can check the link for the steps below:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):http://support.microsoft.com/kb/310747
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
M476dw MFP: the 49 service error
Tried to print something the printer network today and the Panel of the printer just shows "49 Service error, switch off the power, then press. So I did and tried to print again, but got the same thing.
I downloaded the latest version of the software of HP and installed but have not seen any different.
I found the solution with regard to logging on the Advanced tab and turn off everything not necessary, but that did not help me.
I printed the page diagnostics from the front panel (so the machine can still print things), but nothing has jumped out to me. It's basically a bunch of numbers in any case. I did the same thing for the configuration report, and which did not contain anything that could be useful for debugging.
I tried to disable WiFi and simply connect via ethernet, no joy. Still the error.
I tried disconnecting ethernet and printing via a USB cable instead. Always had error 49
So I reset the printer to its default value, and now he has an ethernet DHCP rather than static I would manually assigned before id. Still no joy, even if the symptoms are a little different now.
(1) I click on print to a PDF file
(2) I don't see the PDF through the printing on OSX El Capitan system and be sent to the printer
(3) I see the printer accepts the file, showing the "print document" on the front panel
(4) the printer returns to the home screen without printing anything and OSX it's printed.
So far he has been a reliable printer, of course, he begins to act up right after that its warranty period is over...
Anyone got any ideas? I don't like the idea of paying for a "single-use" support contract and said (as others have apparently said) to it reboot again and again with increasing delays between reboots.
See you soon
Simon
First I will open a parenthesis, you must still pay for electronic devices with a Discover credit card that doubles the manufacturer's warranty.
Secondly, is it always the same file that is causing the error?
Maybe you are looking for
-
AT200 - need an exclusive replacement cable
Hi all Please help I need an exclusive replacement for my AT200 cable, Ive lost the original I know stupid and know that I must replace lead rare stupid thought the Toshiba with the addition of the port as a way to recharge. Also, I can't install the
-
Hello This morning my safari bar apparently glitched and now does not work. When I click it it no longer comes with 15 icons or so favorite that I normally there, nor can I search directly in google. Can someone suggest a method to get rid of this? K
-
Error in boot sequence because of the high voltage via USB port
Hello I have connected a powerable Seagate hard drive external via USB of my touchsmart PC and powered the drive using an adapter instead of the supplied 5V 9V (was a mistake). The computer immediately stop (abnormally) and now when it starts it does
-
I was looking to buy a new computer and I wanted to know if this computer will play https://shop.1wow.com.au/ProductCart/PC/viewPrd.asp?IdCategory=272&idProduct=6774Some games such as vegas 2 and cod4 and burnout paradise and a few other things what
-
4870/GTX 260 in a m9600t. Will it work? (Worried about power supply)
What I did the research, the PSU is 460W with 18 amps on each of the two 12V rails, but I have no idea about the brand or the quality of the PSU. That would be enough to run one of two video cards? I am mixes answers ask around. The power supply will