Memory 667 Mhz works on speed-333 Mhz - Satellite P100

Similar Questions

• Upgrade memory 667 Mhz for Satellite U300

  Hello

  I have a new Satellite u300-11v and I was hoping to upgrade the memory standard modules of current 2 x 1 GB 2 x 2 GB ddr800 for a max speed of memory. However, after looking at intels site for specifications of the chipset for my machine (its got an intel mobile GM965 chipset) it seems that it will only support up to 667 mhz RAM modules.

  Reading a little further, I think that if I have a memory at 667 mhz bus it can only be reached through the module 1 x 2 GB at 667 mhz. Currently I put 2 x 2 GB 667 modules in the machine, the default memory bus at 533 mhz.
  I watched chipset specs of your laptop (945GM) while I was on the site intels and your in the same boat as me.

  Heres so the dilemma: you have just 1 x 2 GB 667 MHz memory to get this speed little extra memory or go for 2 x 2 GB to the slowest to 533 mhz to accommodate all these massive windows page file.

  For me, have family Vista premium running on a machine that can bring together only a bus 533 mhz memory with 4 GB of ram is not acceptable while I will now go back to XP pro which is not so heavy on resources.

  Did you really notice the difference between the memory 533 MHz bus and memory 667 MHz modules?

  Of course, there is a small difference in performance, but you will never get a performance gain by using the modules of 667 MHz instead of 553 Mhz modules.

• Upgrade memory 667 MHz to 800 MHz on a SP P200HD-1DV

  Satellite Pro P200HD-1DV dating 2 048 (1 024 + 1 024) MB RAM * 667 MHz DDR2 *.

  Fact DDR2 * 800 MHz * work on this laptop?

  It will be worth spending the money to make this upgrade as a significant difference in my speed of laptops?

  What memory should I put in to get the most out of my laptop?

  Any comment is appreciated.
  Thank you.

  For more of your laptop just use compatible and recommended memory module. For your laptop model, you must use:
  -1 GB-DDR2-667-PA3512U-1M1G
  -2 GB-DDR2-667-PA3513U-1M2G
  Put this number in Google and search for stores where you can order.

  Good bye

• Equium A110-233 does support memory 667 mhz or 533 mhz?

  Hello

  I have a satellite A110-233 with a processor Intel Core solo processor. Sound of the Intel 945 GM Express chipset. Now, I have looked everywhere and just cannot know for sure if my computer supports at 667 mhz. I know that it supports 533 mhz...

  I'm after a new ram install and want to take advantage of the higher speed if he is cabable.
  Also, anyone know where I can get cheap ram? Pref kington etc.?

  Thank you!

  Hello

  I m not 100% sure, but it seems that the laptop supports a FSB of 533.
  So I advise to use the 533 Mhz memory modules.

  As far as I know Toshiba recommends the use of these modules:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  It seems that the modules are designed by Kingston. Usually Kingston modules are very effective in high-performance, but there is a little more expensive than the modules without name.
  In any case, I would always buy a module high performance, because the quality is much better

• System Recovery works do not with my Satellite P100

  I followed the instructions I saw on many sites to be able to do a system restore to 'out-of-box"State. I've maintained pressed zero and hit the key on and then release the zero key when I hear the beep. After that it only gives me the possibility to proceed to the recovery of the system. It starts just as usual.

  What I am doing wrong?

  Hello Shae

  How to start now? OK Let's ' s go!

  Toshiba recovery procedure can be done with recovery CD/DVD or facilities using images stored on the HARD disk. Image stored on the HARD drive will be offered with the new notebooks only and I am sure that your Satellite P100 is delivered with a CD/DVD media and not the HARD drive recovery option.

  AFAIK this option 0 is for HDD only installation. Please note that this option 0 is not also for all Toshiba laptops. For European books, you can start installation disk with F8 and not 0.

  I hope you understand how this works now. The question is what P100 you have exactly and how you are trying to install OS? You want to use Toshiba Recovery CD/DVDs?

• Bluetooth not working after installing XP on Satellite P100-286

  I have a P100-286, which has bluetooth laptop.
  It worked fine earlier. I used it with my cell phone.

  I have re-installed Windows XP SP2 and I need to use the bluetooth but I can't make it work. I have installed all updates latest BIOS and drivers but still nothing.

  How can I get Windows to recognize the bluetooth? Nothing in the Manager of hardware or control panel for the moment.

  Thanks in advance.

  Hi dan

  I found another thread that you created on the same subject.
  I think you should follow the first thread and shouldn't t divided the whole discussion in two different messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34785&TSTART=0

• Satellite A100-847 does support 667 MHz memory modules?

  I have an A-847 of Satellite with a Numtxpackets® Centimoa® Duo Mobile technology Numtxpackets® Corea? ¢ 2 duo processor T7200, Numtxpackets® PRO/Wireless 3945ABG network connection and Numtxpackets® 945 PM Express chipset
  Clock speed: 2.0 GHz
  FSB: 667 MHz
  level 2: 4 MB cache
  The memory is DDR2-533 MHz originally, I need to know if my phone supports memory 667 MHz modules.
  How do I know this?

  Hello

  Yes, your device supports 667 Mhz modules:

  http://www.Intel.com/products/chipsets/945pm/index.htm

  It is your chipset and if he takes care of so that you are able to work with these modules...

  Welcome them

• Satellite U300 - 13 M - 4 GB DDR2 667 MHz RAM upgrade

  Hello dear experts,

  At the moment, I have 2 x 1 GB Samsung installed DDR2 of memory 667 Mhz strips.

  I would like to extend the 4 GB RAM so I bought Kingston DDR2 667 MHz 2 x 2 GB KVR667D2S5 / 2G modules.

  But the computer is not started.
  It does not start with the single module or with two modules are installed.

  If I install set of Samsung 1x1GB + Kingston 1x2Go, computer starts, but Widnows 7 32 bit see only 1 GB of RAM.

  If I update the BIOS, will it work?
  Or any suggetions?

  Thanks a lot guys!

  In my opinion it has nothing to do with the BIOS update. It's the compatibility issue.

  As you already know that your laptop can be upgraded up to 4 GB and you use 2 x 2 GB modules.
  2 GB compatible RAM has PA3513U-1M2G part number.

  I checked the page Kingston and memory module with KTT667D2 part number / 2G is listed as compatible for your Satellite U300 - 13 M.

  You can check it out here.

• Is - 2 GB module or a work of memory PC2-5300 / 667 mhz for Latitude D610?

  Shows spec Dell Latitude D610 will have 1 GB of memory by Bank, total, up to 2 GB and also uses memory PC2-4200 / 533 mhz.

  What I was wondering if this can be exceeded and D610 would always be OK:

  • If the memory stick 2 GB would work by Bank, up to 4GB total, assuming that the use of memory PC2-4200.
  • Or, if memory PC2-5300 / 667 mhz would work, assuming that using memory of 1 GB.

  I have above that the technical running in my office and usually faster memory memory can be used, just that it runs at a slower speed.

  Has anyone put in memory in D610 which is faster or more dense than does the spec? Believe it or not, part of the problem is that modern memory is denser and faster, and it is cheaper just get a faster or more dense memory.

  Message edited by Teknouser on 09/26/2008 19:33
  
  

• is DDR2 - 667 mhz or DDR2 - 800 mhz memory on the s10-2

  Hello, I want to just make sure that this model (s10-2) can support DDR2 - 667 mhz or DDR2 - 800 mhz memory

  and what is memory maximum ram can be updated... ?? 2 GB or 4 GB...

  also, can I find ram gaming/high-performance notebook on the market...? like office

  What ram to games / high performance type can support this model...

  Hello... Quote "backward compatible with 533 MHz and 667 MHz speeds - does that mean..?
  System itself works in 667 MHz... even when you buy and install a 800 MHz Memory Stick... it works with 667 MHz... machine will become not faster, but won't work that means backward compatible...

  800 = 6400 see table...

  Can.   Transfer transfer ModuleName MemClock i/o clock rate
  100 MHz PC2-3200 DDR2-400 MHz 200 400 MHz 3.2 Gbps
  DDR2-533 PC2-4200 133 MHz, 266 MHz 533 MHz 4.2 GB/s
  DDR2-667 PC2-5300 166 MHz 333 MHz 667 MHz 5.3 GB/s
  DDR2-800 PC2-6400 200 MHz to 400 MHz to 800 MHz 6.4 Gbps

  cordially KalvinKlein

• Portege R600 memory to operate only at 667 MHz?

  Hi all

  Memory of my R600-10 q is PC6400 800 MHz but it only runs at speed PC5300 / 667 Mhz.
  He has been in for repair with Toshiba for that matter, but he returned unrepaired with the explanation that the memory at 800 MHz in the R600 is only meant to run at 667 MHz.

  That don't make sense!
  Why Toshiba would install PC6400 memory in their machines only to the downclock to 667 MHz?

  Can someone please confirm if their R600 only works at 667 MHz?

  > Is my R600-10 q memory PC6400 800 MHz but it only runs at speed PC5300 / 667 Mhz.
  What is the bus (FSB) front-end?

  You should know that the memory would be valid only at the same speed as the FSB.
  For example; memory are 800 Mhz but the FSB 667 Mhz
  In this case, the FSB would clock down from memory at 667 Mhz

  That s all

• Upgrade memory for Satellite U200: are supported with 667 mhz modules?

  I am a new user and I'm on a Toshiba Sat U-200-115. I want to upgrade, and I intend to do an upgrade to 4 GB.

  What I want to know, although it said this laptop supports the upgrade to 4 Gig, but this model use a DDR2 533 MHz memory. Considering that since the Web from Toshiba site, I see only 1 slot memory of Gig available with this clock speed and a 2 Gig DDR2 available with clock speed of 667 MHz. What I want to know, if I want to upgrade to 4 GB memory with clock speed more high clock (667 instead of, 533) would work on this machine?

  Thank you.

  Hello

  It depends on the chipset of your Satellite U200-115.

  If chipset supports 4 GB of memory and BIOS and Vista supports 4 GB of memory too, then you can go use the full 4 GB of RAM.
  If the FSB takes care also of 667 Mhz then modules of memory would also go wit full 667 Mhz speed.
  If the chipset supports only 533 Mhz then the chipset would slow the 667 Mhz module and memory would go only to 533 Mhz.

  So what you have to do is check what chipset is equipped in the U200-115.
  Full details and specifications of chipset you can find on the page of Intel.

  But generally, there is no big difference between the modules of 533 Mhz and 667 Mhz modules 667 Mhz turns a little faster but you won't see everything boosts performance

  Concerning

• Satellite U400-138: RAM works with 667 Mhz instead of 800 MHz

  Hello

  I have Satellite U400-138 with 3 GB of RAM (2 + 1 GB sodimm modules)
  I have new kit 2x2gb sodimm-s Corsair PC6400(800MHz)

  When I install new modules, system reported that they are working on 667 Mhz instead of 800 MHz,
  Maybe that's the problem BIOS chipset because that support this frequency.

  Help me, what to do, to run new modules on 800 MHz?

  Hey Buddy

  I doubt that it is a BIOS problem.
  The point is that the speed of the RAM can be lowered and locked by the FSB (front side bus)
  If the FSB supports only 667 Mhz then your RAM 800 Mhz will run only at 667 Mhz

• Is a 2 GB 667 MHz DDR2 SDRAM expansion memory correct for a mid 2007 iMac

  I have an iMac mid 2007 which has served me well, but becomes slower and slower. He has 2-1 GB 667 MHz DDR2 SDRAM, one in each location. Can I replace each 1 GB 2 GB and hep will be me with the speed?

  Thank you

  CAP2799

  Yes

  OWC has a 4 GB kit for $36, more even a kit 6 GB for your iMac.

  See > http://eshop.macsales.com/shop/apple/memory/iMac/Intel_Core_2_Duo

• Satellite M70: Memory 533 MHz with 667 Mhz compatibality?

  Hello
  I bought the new Satellite M70 (PSM70) 1.7 Ghz (400FSB) with the construction of memory DDR2 PC2 512 MB 533 MHz, if I DDR2 1 G 667 Mhz added to it? the Mhz will be a problem? and why the standard memory 533 Mhz and 400 Mhz processor speed?

  Kind regards

  Hello

  In my view, you must use the Toshiba recommended of the memory modules.
  AFAIK you can use DDR2 modules like these:

  DDR2 -400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  To my knowledge, the device supports:
  Intel Celeron M up to 1.7 GHZ 0.09u CPU, 1 M L2, at 400 MHz FSB
  Intel Pentium M CPU up to 2.26 GHZ 0.09u, 2 M L2, 533 MHz FSB

  Therefore, it is possible to use 400 and 533 MHz memory speed.
  You can also use the modules of Kingston. The performance is optimal.