Memory allocated for mobility radeon on Satellite A100-768 graphics card

Similar Questions

• Satellite A100-768 - video card driver necessary to win 8

  Hello world

  I can't find any suitable driver for my Satellite A100-768 where I just installed Win8, my graphics card should be Ati x 1400 but nothing works even with the Ati drivers or toshiba.

  Please help me!

  Satellite A100 is old piece of hardware and not supported for Win8. Even much more new models are not supported. I fear you will not be able to get it m.

• Satellite A100-011 graphics card replacement

  Recently, I've had graphics GeForce Go 7600 in my laptop Satellite A100-011 beloved suffer damage because of the known problem with mobile bumps thermals in copper on the series GeForce 7/8/9 of the graphics chips. :_| I work at HP and get us a large number of these problems too, hope that Nvidia burn for this. Map is now partially defective, 3D is completely busted, but at least 2D works for now.

  I had almost the same problem a year and a half when the laptop comes out the guarantee and I brought to ideal electronics, it is the company that provides the service for Toshiba here in Athens, Greece.

  They were very kind to this topic and allowed me to buy an additional warranty year whereas they might change my free graphics card. I took a snapshot of that card faulty chart, they replaced, here it is:
  http://img357.imageshack.us/i/12062008gq8.jpg/

  However, when I went today at the same company for the second time after that the second card suffered the same fate as the first, I was not so lucky. This time there is a kid who tried to convince me that the graphics on this model cannot be changed without changing the whole motherboard.

  I tried to explain to him that they have already changed graphics in my machine without changing the Board of Directors, but he was holding with arrogance its soil, then I turned and left, like changing the Council too would cost more that this laptop is worth.

  The only option for me if I want to save this laptop is somehow, get the graphics card, and change myself. The problem is that Toshiba does not publicly list the parts reference numbers in their laptops, or if this is the case I of course was not able to find it. If someone could find the part number of the GeForce Go 7600 card in my laptop I would be very grateful, because I have to disassemble the laptop everything to check on a sticker on the card itself. Also, if you know some other card compatible with this laptop, I'd be happy to hear about it. In addition, if you know an online retailer who delivers the Toshiba laptop parts at the international level it would be a great help.

  My product number is PSAARE-04800VGE. If I'm not able to change the graphics on this laptop, I use it as a web browsing machine until a graphics chip dies completely.

  Hello

  To my knowledge, the graphics card is not replaceable. It s part of the motherboard and you need to replace the whole motherboard if the graphics card is dead.

  Unfortunately, but in my opinion there is nothing to see.
  You will need to change the whole mobo.

• Battery PA3399U-2BRS for Satellite A100-768

  Hello!

  I'm looking for a new battery for my Satellite A100-768. I don't find this kind of battery (PA3399U-2BRS) on your site.
  Can you help me find another battery for my laptop, please?

  Thank you in advance.

  Hi Flo91.

  If you are looking for a PA3399U-2BRS using Google, you will find a large number of online shops they sell this Toshiba battery.
  Did you check that?

  Alternative you can contact an ASP. They sell all spare parts Toshiba and if there is another compatible battery, they tell you it. Simply contact the guy and ask for help. You can find a list here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Good luck! :)

• Get the DLL string (memory allocated for DLL)

  Hi, I'm aware there are a lot of discussions around this topic, but there are a lot of variations and I've never used before LabVIEW, and I seem to have a hard time at a very basic level, so I hope someone can help me with the below simple specific test case to put me on the right track before I pull my hair remaining.

  I've created a DLL with a single function "GenerateGreeting". When it is called, it allocates enough memory for the string "Hello World!" \0"at the pGreeting of pointer, copy this string to the pointer and sets the GreetingLength parameter to the number of allocated bytes (in the DLL in the end, I want to use, there is a DLL function to free the memory allocated for this way).

  I created a header file to go with the DLL containing the following line.

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  I then imported the LabVIEW file using the import Shared Library Wizard. That created a "generate Greeting.vi' and everything seems somewhat sensitive for me (although this does not mean a lot right now). When I run the vi, the ' GreetingLength on ' display correctly '13', the length of the string, but "pGreeting out" shows only three or four characters (which vary in each race), place of the string that is expected of junk.

  The pGreeting parameter is set to the 'String' type, the string "String pointer C" format, size currently Minimum of 4095. I think the problem is that the DLL wants to allocate memory for pGreeting; the caller is supposed to pass a unallocated pointer and let the DLL allocates memory for the string the right amount, but LabVIEW expected the DLL to write in its buffer préallouée. How to with LabVIEW? Most of the functions in the DLL in the end, I want to use work this way, so I hope that's possible. Or I have to rewrite all my DLL functions to use buffers allocated by the appellant?

  The vi , header and the DLL are atteched, tips appreciated. Edit - cannot attach the dll or the headers.

  tony_si wrote:

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  Although char * & pGreeting is actually a thing of C++ (no C compiler I know would accept it) and this basically means that the char pointer is passed as a reference. So, technically, it's a double referenced pointer, however nothing in C++ Specifies that reference parameters should be implemented as a pointer at the hardware level. So free to decide to use some other possible MECHANISM that takes the target CPU architecture support a C compiler constructor. However, for the C++ compilers, I know it's really just syntactic sugar and is implemented internally as a pointer.

  LabVIEW has no type of data that allows to configure this directly. You will have to configure it as a whole size pointer passed as a pointer value and then use a call MoveBlock() or the support VI GetValuePtr() to copy the data on the pointer in a string of LabVIEW.

  AND: You need to know how the DLL allocates the pointer so that you can deallocate it correctly after each call to this function. Otherwise you probably create a leak memory, since you say that the first 4 bytes in the returned buffer always change, this feature seems to assign to each run of a new buffer that you want to deallocate correctly. Unless the DLL uses a Windows such as HeapAlloc() API function for this, it should also export a function according to deallocate the buffer. Functions like malloc() and free() from the C runtime cannot always be applied in the same version between the caller and callee, so that calling free() by calling on a buffer that has been allocated with malloc() in the DLL may not work on the same segment of memory and result in undefined behavior.

• Maximum memory allocation for HP Pavilion dv7-7010us

  HP Pavilion dv7-7010us
  Windows 7 (64-bit)

  Hello!
  As shown in the topic, I'm looking for the maximum memory allocation for my new HP Pavilion dv7-7010us notebook.

  I am aware that my computer has two memory slots filled a 2 GB DDR3 SDRAM and a 4 GB DDR3 SDRAM.
  If anyone could also tell me the perfect combination of chip (2 x 4 GB, 2x16GB, etc.) to get the maximum memory allocation, that would be much appreciated. Thank you!
  -Angelo

  Hi, Angelo:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c03221579.PDF

  Supported memory configurations are in Chapter 1, page 4.

  Paul

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul

• Re: Satellite A100-768: need help to install an ethernet controller & network

  Satellite A100-768

  Hello, please help me to install * ethernet controller & network *.

  Lost my original CD installation CD and hope that the downloaded drivers will do the job but without success...

  All others (sound, screen, dvd, 1394,...) work very well.

  Thank you!

  Hi mate

  Ethernet, WLan or LAN controller.
  What exactly do you need? Driver WLan or LAN driver?

  Satellite A100-768 belongs to the PSAA9E series.
  All the drivers are located on the page of the European driver Toshiba

  As far as I know the Wlan card is INTEL 3945ABG and the driver can be found here also:
  http://APS2.toshiba-tro.de/WLAN/

  The LAN can be Intel or Realtek check both

• Satellite A100-768 - is this compatible 64 Bits of Windows 7 or not?

  I have a Toshiba Satellite A100-768 and I would like to know if it is compatible Windows 7?
  Can I use the 64-bit version?

  Hello

  Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and choose your model to see if Win 7 64 bit drivers are available. AFAIK, most of the Vista driver is compatible with Windows 7. So, I guess it will work

• Satellite A100-768 - problem of backlight after BIOS upgrade

  Hello

  I have a Toshiba Satellite A100-768 PSAA9 S10V600 bios update,
  I have no backlight on the screen apart and I have the original bios.

  Voila now I see the page but there are more backlighting, except at the beginning.

  http://www.YouTube.com/watch?v=XZJL-z3UFRU

  Help me please

  Hello

  As suggested above, contact the service center in your country. They will fix your laptop.

• Satellite A100-768: processor upgrade?

  Hello

  I have a Toshiba Satellite a100-768
  is it possible to upgrade the processor?
  I would buy a cpu merom and install this one...
  or is the processor soldered to the motherboard?

  Kind regards
  brechtvm

  Hello

  The answer is no, it is not possible to replace the processor in a Toshiba laptop. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

  By the way: A100 is one of the latest devices and I don t understand why you want to swap the CPU. Why you didn t buy best camera has better CPU performance?

• Need a driver for the gforce 6400 ultra 128 MB graphics card

  Original title: find a driver

  Hello

  I need a driver for the gforce 6400 ultra 128 MB graphics card.

  know of anyone who has this?

  TNX for help

  Hello

  Take a look in the manufacturer's website:

  http://www.nvidia.in/page/GeForce6.html

• ATI Radeon HD 5670 512 Mg graphics card

  Can I learn After Effects if my iMac27 has an ATI Radeon HD 5670 512 Mg graphics card?  Will it hurt my computer to do anything in AE?

  No, using AE will not harm your computer.  Do not expect this card to work a kind of acceleration of miracle in AE.  You get a little resumption of hardware acceleration of it.

• Satellite P300 - new driver for mobility radeon HD3470 graphics card

  Hello world.
  I want to update the driver of my screen for the most recent level available. Still the site of AMD, Toshiba answered me, I am unable to find: AMD's radeon but no mobility radeon, and 3470 series is not cited.

  Is anyone able to help me? Thank you
  Eugenio

  PS I am writing in English in order to catch as many people on the forum, but if you want that we invite you to answer in Italian.

  Hello

  Why you want to update the display driver? You are not satisfied with the old version?

  I checked the Toshiba page and it would be so interesting to know what Satellite P300 you exactly, because there are different models.

  Normally you can directly download the driver of Toshiba and redirect to AMD isn't known to me so please check the page again:
  http://EU.computers.Toshiba-Europe.com > support & downloads > Download Driver

  The point is that AMD/ATI doesn't provide directly moving map display driver. You can get these drivers from the manufacturing of the laptop directly.

• Change the memory allocated for the graphics?

  Hi, I have an Equium A60-181 with graphics ATi Mobility Radeon 7000. For the moment, that this GPU is using 64 MB of my system RAM that result with only 448 MB of RAM (512-64) for Windows. For a video resolution of 1024 x 768 32 bit it's a ridiculous amount of memory since it only really requires 4 MB for this. I'm not interested in games or 3d graphics, so my question is if I can change the memory allocated to recover more memory system?

  see you soon,

  Richard S.

  HI Richard,

  ATi drivers include an improved graphics option devices-> display manager that allows the value of the AMU to change. My SA30 supports load 16 MB, 32 MB, 64 MB and 128 MB.

  The same value UMA adjustable in BIOS Setup Panel.

  HTH