memory HP pavilion p6310y is the correct type

Similar Questions

• WAG160N Upgrade file is not the correct type or version of this device.

  I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:

  Upgrade file is not the correct type or version of this device.

  Update failed.

  Please select the correct file and try again.

  I forgot that I had extracted the first .zip file. Who and the upgrade worked.

• use of the correct type of phone with fax cor-

  Installation 7520 Photosmart all in one printer. Reading the posts previous to the forum and no explain why I get this error message when you try to get the fax configuration. (You do not use the appropriate phone cord type).

  I AM using the cable supplied with the printer. I tested with and without telephone set. When I plug a phone and connect it to the 2 - ext, I get a dial tone and dial out on a clear line.

  The printer is connected directly to a wall phone jack with no intermediate devices by using the line 2-wire provided. I get a PASS on the fax connected to the wall outlet active.

  I have seen this error before fax reports, but often the fax system still works.  You test the send/receive faxes, or you have just run the Test of fax on the printer?

  If you want to test your fax service please take a look at the HP Fax Back System Test service forum thread found here.

  I would like to know if the printer is successful or not in the send/receive faxes.

• RemoteObject does not making a cast to the correct type

  Hello

  I have a Flex/Java project which has 47 of DTO Java and ActionScript 47 VO all, except one of them classified can be passed between flex and java with a problem. I see no significant difference between the problem classes and others. I get this error message: flex.messaging.io.amf.ASObject cannot be cast to com.fujitsu.ad.services.db.dto.UserRole. I note during debugging in java, objects that were received from flex are of type ASObject and Flex side objects that were on a pass from java were of type Object. I've included the two class below in the hope that someone migt be able to see something obvious.

  Thank you

  JJ

  package

  com Fujitsu.ad.services.db.VO

  {

  Import mx.utils.ObjectUtil;

  [

  Bindable ]

  [RemoteClass(alias=)

  "com.fujitsu.ad.services.db.dto.UserRole" )]

  public class UserRole

  {

  public var : number;

  public var name: String;

  public var description: String;

  public function UserRole()

  {

  }

  public function clone(): UserRole

  {

  return ObjectUtil.copy ( this ( ) as Role of the ;

  }

  }

  }

  /**
  * Copyright (c) 2010 Fujitsu Services Ltd.
  */
  package com.fujitsu.ad.services.db.dto;

  /**
  The class applying.
  */
  public class UserRole implements java.io.Serializable {}

  /**
  * serialVersionUID.
  */
  private static final long serialVersionUID = 1 L;

  / * The ID. */
  Private long id;

  / * The name. */
  private String name;

  / * Description. */
  description of the private channel;

  /**
  * Instantiates a new application.
  */
  public UserRole() {}
  }

  /**
  * Gets the ID.
  *
  * @return id
  */
  {} public long getId()
  return this.id;
  }

  /**
  * Sets the id.
  *
  @param the new ID.
  */
  public void setId (long id) {}
  This.ID = id;
  }

  /**
  * Gets the name.
  *
  * @return name
  */
  public String getName() {}
  Return myIdName;
  }

  /**
  * Sets the name.
  *
  @param name new name
  */
  public void setName (String name) {}
  myIdName = name;
  }

  /**
  * Gets the description.
  *
  * @return description
  */
  public String getDescription() {}
  return description;
  }

  /**
  * Sets the description.
  *
  @param description description
  */
  {} public void setDescription (description of the chain)
  This.Description = description;
  }

  /**
  * @see java.lang.Object #hashCode ().
  * @return the hash code
  */
  @Override
  public int hashCode() {}
  first final int = 31;
  int result = 1;
  first = result * result + (int) (id ^ (id > > > 32));
  return the result;
  }

  /**
  * @see java.lang.Object #equals (java.lang.Object).
  @param obj
  * @return true or false
  */
  @Override
  public boolean equals (Object obj) {}
  If (this == obj) {}
  Returns true;
  }

  If (obj == null) {}
  Returns false;
  }

  {If (getClass()! = {obj.getClass ())}
  Returns false;
  }

  UserRole final another obj = (UserRole);

  If (id! = other.id) {}
  Returns false;
  }
  Returns true;
  }

  }

  Sometimes you meet it because the class has not been added to your swf file when it was compiled (because there no reference in the code!)

  If you don't know that everything seems wise good code, try to add a reference to the class (in Flex) that is not strongly typed something like this:

  role: UserRole var = object as UserRole;  (with the usual import, in fact just the import statement can be enough)

  (Make sure to place it in a class that is certainly used, not the VO itself.)

• Cannot save the types of collection with the correct data type (structure type)

  Hi all!
  
  I am beginner in using the Data Modeler (SQL Develeoper Version 3.0.04 build HAND - 04.34)
  
  I tried to define types of structured data type type collection.
  
  for example
  Types of structure: StruA (for example, Integer, Float) and StruB (e. g. whole, Timestamp, Double, Double)
  Types of collections: TabA should collect the types of StruA and TabB should collect the types of StruB.
  
  create or replace TYPE TabA IS TABLE OF StruA;
  create or replace TYPE TabB IS TABLE OF StruB;
  
  It is possible to select the correct data type in the 'Collection Type properties' dialog box.
  
  The data type is installed to unknown after the registration and the reopening of the design. I see that the correct type has been entered in the xml file associated with the type of collection:
  < dataTypeDescr class = "oracle.dbtools.crest.model.design.datatypes.CollectionType$ DataTypeWrapper" >
  65677BBB-FB68-963C-552D-3F98E528520B < type > < / type >
  false < isreference > < / isreference >
  < / dataTypeDescr >
  
  File name of the structured type is 65677BBB-FB68-963C-552D-3F98E528520B.xml
  
  On the display of the design or generation DDL lose again this information.
  Is - this poor handling or a bug in the Data Modeler?
  Can anyone help? THX
  Gabor
  
  Edited by: user9529349 the 26.09.2011 07:49

  Hey Gabor,

  I'm afraid that this is a bug. This problem was reported earlier in this forum, loss of definition of type of data from one type of collection

  Thank you
  David

• Compatibility memory Office Pavilion

  A Pavilion m9400z desktop computer will accept ea 2 DDR2 PC 6400 2 of 4 GB memory cards, or I have to go with 4 boards of 2 GB?

  Hello

  Use four DIMMs of 2 GB and make sure that they match in specifications to avoid problems. You can see the plug from motherboard and memory here.

  Go to Kingston, Corsair , or critical and use the memory configuration tool to find the correct DIMMs.  Then, followed by a call to support technical or commercial to make sure that you have the correct DIMM selected.

  Going past 4 GB will mean you need a 64-bit operating system to take advantage of the memory.

• memory max HP pavilion p6310y

  What is memory max that I can use on my hp pavilion p6310y

  Hello

  Looking at the specifications Page for your PC, the maximum Ram would have 16 GB (4 x 4 GB DDR3 modules).

  Kind regards

  DP - K

• Pavilion AL033TX: Extend the flag AL033TX memory - how?

  I find not in the copy of the documentation that comes with my new PC anything on how to open the PC case and how to develop memory.

  Accofding spec, it consists of 8 GB 2133-DDR4 SDRAM (1 x 8 GB).  I would like to add another 8 GB of memory.  I found the following part sale:

  Model is 14-al033tx.

  Your repair manuals

  Two SODIMM, not accessible/not extendable locations

  See p. 36. The correct answer is so that you are not supposed to open. HP reserves the right to void the warranty if you do.

  However, it is not the model harder to open and access memory locations, and it will take modules of 2 x 8 gig for a total of 16 concerts. But you're on your own warranty-wise if you decide to use self-help. Let us know if there are any other questions. Alternatively, you can do a little better than $140 on a 8 GB DDR4 memory module - 2133. Where do you live (country)? We can help with that, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Choose the Correct memory expansion... Equium M50-163

  Hi all, I am currently having a lot of difficulty finding the exact type of additional memory, I need to buy, to be able to work properly in my laptop.
  Please could you give me a help in this.
  I would like to know what you need to know (as appropriate) on my laptop that i post in response.

  Thank you very much, a help much appreciated.

  Hello

  First if you have problems to find and buy a plug in charge and compatible parts or devices in the best way is on the agenda of the Toshiba service partner in your country.
  But I googled a bit and found that this device was shipped with 512 MB and memory 2 slots are available.
  In addition, you can use the modules:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

• What is the max memory HP Pavilion dv6 [LM720AV] can be supported?

  What is the max memory HP Pavilion dv6 [LM720AV] can be supported?

  CPU i7-2720QM

  I know that it supports 8G (2 x 4G). I want to know if it supports 2 x 8G.

  Of after Crucial, it supports 8 GB maximum.
  
  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv6t%20Quad%20Edition%20Series & cat = RAM

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• HP Pavilion dv6-6185tx: could you tell me the bus type of the hard drive (HDD) of HP Pavilion dv6-6185tx

  Hi, I would like to Exchange SSD for my PC, HP Pavilion dv6-6185tx. However, I couldn't find the but type (for example, SATA, SAS, SCSI, or IDE ect...) of this model on the Web site.

  If anyone knew that, please tell me, thank you very much!

  SATA, 9.5 mm or thinner SATA SSD will fit.

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• G6-Notebook Pavilion try ID correctly so I can order the correct spare part.

  Hello

  I have a HP Pavilion g6 - 2250sa Notebook where I lost the 'ENTER' key and fixing clips. I try to identify the correct spare parts but when I put my serial number, description of the product, or product on the HP product site is not recognized.

  I looked on several sites keyreplacement but none of the keyboards they show the configeration even than mine.

  They all have oblong shape keys long "ENTER" while mine has upside in the shape it of 'L' one.

  Can you advise me please?

  Here is the link to the guide service that has the reference numbers of the keyboard you need as well as the modalities of withdrawal and replacement:

  http://h10032.www1.HP.com/CTG/manual/c03593041.PDF

• Pavilion p6310y: WD10EZEX hard drive is compatible for the Pavilion p6310y?

  Hello

  I'm looking for a replacement of the hard disk of my Pavilion p6310y. I found a hard disk WD10EZEX on Amazon. It has the same features as the WD10EADS came with the pc when I bought it. But with some better features. The WD10EZEX is compatible?

  Hi, the active drive WD10EADS is a HARD SATA 2.0, while you are looking in WD10EZEX is a SATA 3.0. However, this should not be a problem since the SATA standard is backward compatible and a SATA 3.0 drive should work on a SATA 2.0 port. The difference in the size of the buffer and the ROTATION speed should not be a problem too, so you should be able to use a WD10EZEX in your system. Be sure to do a good backup of all your data on an external HARD drive before you start to replace your HARD drive. Good luck.