Similar Questions

• Application of CLDC cause the power of the device is turned off.

  Hello

  One met this problem, when the execution of my application and for a while, the device has been turned off automatically. I tested several times, always happens, happens on dperipherique (not on the Simulator), the so I can't debug.

  My application is a SNS client it's network connection (http) and persist the data on the device, of course, the user interface to display the data.

  I think there is a mistake in my application caused the device to be off power (only slide off the battery voltage may start the device again). Anyone have any idea what could cause this?

  Thanks in advance.

  MoWriter

  OK, it seems apparent to the bad battery. Even thoug, it showed there is 1/3 battery, when some app run (not my own application), it would be off.

  If I plug the charger while test, then no power offshore.

• This could be the cause the dervishes ball or freezing page in Safari (most often in the Amazon)?

  It is a relatively new problem.  My iMac is running Yosemite 10.10.5 with Safari 9.0.3.

  I deleted all the data of the Safari preferences Web site, deleted history and permissions repaired without any significant improvement

  There is no list extensions in preferences Safari and the plug-ins listed are Adobe Acrobat and Shockwave Flash 20.

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Addition of Google Chrome, now Safari does not open, impossible to link electronic mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Add Google Chrome, now Safari opens Cannot link e-mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Third party extension and plug-ins?

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  The problem may be caused by a Safari Extension, Internet plug-in or another add-on.

  The safari Extensions, Internet plug-ins, and other modules are designed to improve or customize the browsing experience. Modules are widely available on the Internet, and some are installed as part of an application or other software. If you have Add-ons installed, an add-on might be at the root of the issue.

  If the problem is the unwanted pop-up windows, advertisements and graphics while surfing on the web, discover how to remove the ad-injection (adware) from your Mac software.

  Disable the Safari Extensions

  You can disable Extensions Safari to learn if all are causing the problem.

  1. In the Safari menu, choose Preferences.
  2. Click the Extensions icon, and then select an extension from the list.
  3. Uncheck the box enable disable this extension.

  If turning off an extension solves the problem, look for updates of the extension by clicking Update in the lower left corner of the window. Or remove the extension by clicking on the button uninstall.

  Remove Internet plug-ins and other add-ons.

  You can remove Internet plug-ins and other add-ons to see if everything is the origin of the problem. To find them, quit Safari and open these folders in library:

  • The library folder at the top level of your hard drive. Open it from the Finder by choosing go > go to folder in the menu bar. Then type /Library and then click OK.
  • The record library in your home folder. Open it by organizing the Option while choosing go > library in the menu bar.

  The folders in the library contains the following folders for modules. Move all the files in these folders to the trash.

  • Internet Plug-Ins
    Do not remove the default Browser.plugin, nslQTScriptablePlugin.xpt, Composer.webplugin of Quartz or QuickTime Plugin.plugin.
  • Input methods
  • InputManagers
  • ScriptingAdditions

  If the removal of the files in these folders solves the problem, quit Safari again and gradually put the files until you find the one at the origin of the problem:

  1. Open the Recycle Bin and select one of the files that you removed. Chose file > back up. The file back to its folder.
  2. Open Safari and see if the problem returns.
     • If the issue is returned, you have identified the add-on causing the problem. Do not use or contact its manufacturer for an updated version.
     • If the question does not return, quit Safari and put back another file.

• Safari opens the help file for Messages of the application in opening

  I hope someone can help, it's driving me crazy!

  Everytime I open Safari after the reboot, a page opens with the 'Ayuda de messages' text and nothing else. The address in the address bar is ces/es.lproj/index.html file:///Applications/Messages.app/Contents/Resources/iChat.help/Contents/Resour pointing to a help file in the Messages application. I opened the package and I tried to delete this file as an experiment, but he says that it is a system file and cannot be deleted.

  Does anyone know how to find out what is the cause and stop it? And no, my home page is not defined at this address

  Thanks in advance!

  OS X v 10.11.6, Safari 9.1.2, 9.2 Messages

  Quit and restart Safari while holding down the SHIFT key.

  Go?

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• HP Pavilion p6-2: problems on blocking down after I installed the new power supply on a p6-2207ep

  Hi all

  B4 explaining my problem, I really don't know if I should post this in office, or material in this section of the freezes/crashes/locks but since I posted in freezing section and no results I decided to try here.

  My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032

  I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade 380 R9 I was planning to do.

  Is there some BIOS I get HP for this cause of power supply from what I read, if I not only one of the things like manufacturer reset to the factory settings may stop working... Currently, my Bios version is 7.11...

  Problems with the new power supply:

  When I closed windows 7, the first problem, the picture freezes on the screen that says "blocking windows down", I waited a bit and nothing, tried to turn off the machine while keeping down the power button but nothing to disable directly in the rear switch of the PSU...

  Second time happened a little different soomething, seconds after freezing again on the screen that says "blocking windows down" windows actually turned off and the screen is off but everything inside the computer case continues to flow fans in light of the power button / stop and was also able to close by keeping pressed power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  Also tried the GPU with the new PSU fans worked but no entry in the screen that I guess just a power supply problem.

  ATM, I'm RMA waiting to know if it is a power supply defective or not...

  Problems after the reinstallation of the original material:

  Some of the same problems when I got the new PSU remained namely:

  Windows actually stop and the screen is off, but everything inside the computer case continues to flow fans in the light of the button on / off and was also able to close by keeping the power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  What I've done so far to try to fix the problem:

  Restore windows 7 to a b4 point the hardware installation.

  Reset the BIOS

  Hard reset

  Clean boot

  Do you have a full checkdisk which means 0 KB in bad sectors...

  A complete hardware checked all tests with the HP software

  A system file check everything beautiful

  What I fear most is a faulty PSU that may have caused damage to my equipment mainly the motherboard, but could be something else entirely.

  Maybe I need a specific BIOS for that motherboard / PSU combo, but after returning to the source material, the problems remained.

  What I can do because I can only make the software tests since I don't have an extra PC to test the parts...

  Hello

  Disconnect all external devices except the keyboard and mouse when you try to solve the problem.

  Disconnect the PC and removed the CMOS battery.  Press and hold the power for 30 seconds.  Now, replace the CMOS battery and plug the PC give a TI a go.

  Your PC is not stable enough to make a BIOS update. Do not attempt to use the graphics card XFX until your PC is stable enough to make a BIOS update.

• Math (s) program has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available,

  Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!

  Hello

  It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us

  Don't forget to restart your computer after you run it.

  If this does not work, try to uninstall and reinstall the drivers for your printer.

  If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)

  I hope this helps!

  Mithrandir

• On Windows 7, by pressing the eject button on the DVD player sometimes causes the monitors to twinkle

  My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm running a dual monitor, with a monitor on a DVI input and the other on a HDMI input. Both monitors sparkle.

  The only things I can think of that can cause the problem are of my diet or my graphics card. My PC has never stopped on me during other operations, including executing some more processor intensive tasks. This seems to be a problem with my graphics card, but why my graphics card would randomly hitting the eject button?

  Windows 7 Enterprise SP1 (64-bit)
  Intel Core i5-2400 s Sandy Bridge 2.5 GHz (3.3 GHz Turbo Boost) LGA 1155 65W Quad - Core Desktop Processor Intel HD Graphics 2000 BX80623I52400S
  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBRL
  ASUS black drive Blu - ray SATA model BC-12B1ST/BLK/B/AS - OEM
  ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 Intel H67 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard
  XIGMATEK NRP - PC series ACXTNRP-PC402 400W ATX12V Ver.2.3 80 PLUS BRONZE certified Active PFC power supply

  I found the solution to my problem of graphics. Wow, really?

  So after the video driver updated, he set a maximum resolution on my HDMI output to 1600 x 900. That's if access you the resolution settings through the control panel > display > adjust resolution. Is not that how most people set the resolution?

  The update of the driver has replaced the max resolution by default setting, but it can be given via Intel display control panel (no was not yet aware, I had such a control panel). This control panel option is available for the Intel graphics controller hardware. To set the resolution, right click on the desktop and select "graphics properties." Select 'Advanced Mode', and then configure the resolution 1920 x 1080. Once the parameter is committed through this control panel, the Windows 7 Control Panel settings to work as you would expect, and the monitor is the 1080 p display.

  It is delayed. Pardon my French.

  Well, at least now I'm back where I started, IE still has the problem with the eject button causing the dual display to flicker. It happened only twice since the update of the video driver, then perhaps that these events were flukes?

• Buttons that cause the window to close in IE8

  Hello

  I have a weird bug that seems like it should not be possible.  I use 6 Captivate and SCORM 2004 edition as a .swf.

  I created a presentation of captivate with several software simulations incorporated in it as animations.

  The slides containing these simulations are break through a mostly empty widget hidden behind the animation.

  Each simulation starts with a button start this progress simply to the next slide and ends with a button continue with a javascript function that moves the presentation of the parent to the next slide.  That javascript is:

  function nextSlide() {}

  var objCP = document. Captivate;

  objCP.cpEISetValue ('rdcmndNextSlide', 1);

  }

  nextSlide();

  Each of the six software simulations has the Start button and keep even that was copied and pasted from the first.

  All works perfectly in Chrome, except that JavaScript works only when the project is published on the LMS.

  However, in IE8, I encountered a very strange problem.  Some buttons work as expected, but a few of them cause the window IE8 containing the presentation to close without warning or error.  Non-working buttons remain consistent and continue to have problems even after many republishings, and even after recreate both the buttons and the slides containing simulations.

  When I run it locally, he throws the following errors when I click on one of the buttons to bad:

  49:Wed July 3, 10:44:06 EDT 2013 - unloading

  50:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  51:Wed July 3, 10:44:06 EDT 2013 - ExecFinish, ExiType = SUSPEND

  52:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  Anyone has any ideas on this?

  Thank you

  Brian

  Looks like you hit the JavaScript bug found here:

  http://captivatedev.com/2012/12/17/display-the-students-name-from-your-LMS-using-Adobe-cap market-6-x.

  and more info here:

  http://www.cpguru.com/fix-for-the-Adobe-Captivate-6-JavaScript-bug/

  This problem has been resolved in Cp 7.0.  What version do you use?

• Invalid SQL syntax causes the removal of the view

  I have found that when you change a view through SQL Developer, entering the syntax invalid SQL and hit 'Cancel' causes in my opinion should be deleted. Here are the steps that present this problem for me:
  
  1. create, save, and close a valid database view by clicking right "views" on the Connections tab and selecting «New view...» »
  2. open the view via a right click on the view and selecting ' Edit... »
  3 change to point to a non-existent table
  4 try to save, select "OK".
  5. when presented with an error message, click OK in the dialog box "Edit Error object.
  6. click on 'Cancel' in the window "Edit View".
  7. right click on the view, and then select 'open '. The "SQL" tab is empty, even though you can see the value in the "Columns" tab
  8. after refreshing, the view is a party.
  
  I looked under the problems known and searched the forum to see if it had been reported. Please let know us if there is some setting I can change to avoid this problem. I hope it's a bug, because I can't imagine the changes not saved, causing the removal of the view would be the desired behavior. Please find below my contact information of the environment.
  
  -Matt
  
  Details of the environment
  ==============
  
  The version of SQL Developer: 3.0.04 build HAND - 04.34
  DB version:
  Oracle Database 10g Release 10.2.0.4.0 - Production
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  Java version:
  Java version "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  The Client Java VM (build 14, 2 - b01, mixed mode, sharing)
  OS: Windows XP Pro SP2

  Yes.
  Changed to Bug 12334150: EDIT DELETED THE VIEW DIALOG box ON entering a not VALID AND the CANCELLATION of THE DIA SYNTAX

  -Rambeau

• You are using Safari on the mode not supported on the iPad with R17

  I have a customer who just bought for their sales of the iPad, and they try to use the 'Safari' or 'private' in a mode not supported. They have transformed the center of messages, but when they try and login after clicking on the message of no browser supported that they receive the following error message:
  
  Occam, update browser Servlet: Eception exception: and eception exception occurred while trying to render the page. Please try again later or contact customer service for more information.
  
  I know we have customers and sales advisers internal with CRM OD working on the iPad with the message off the power Center. Did anyone see this error when you are trying to connect with the iPad or the iPhone?
  
  Thanks for your help!

  Support of CRM On Demand using Safari on the iPad will be available in R19.

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• There is no update of Safari in the MAS!

  On the page of Apple's Safari , there is a button to upgrade now.

  But by pushing on it will take you to a page of MAS of El Capitan, not Safari. And Safari 9.1.2 is NOT included in the 10.11.6 updating. And it does not appear under updates in my App Store. I have already installed 10.11.6. and Safari 9.1.1.

  So WTH are supposed to get Safari 9.1.2?

  
  

  Apple's Web site says "Safari is included with OS X. To get the latest version of Safari, install the latest version of Mac OS X for the Mac App Store. " Safari but is not part of the package of.

  

  Way to go, Apple!

  You must install OSX 10.11.6 El Cap for 9.1.2. This is they way to get it. Just because you don't see it inside the package does not mean that he will not get updated.

  Safari is part of Mac OS x and is updated with it. No sense of the existence of Safari building package for the update.  Just update OSx and you will get Safari 9.1.2.